• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2005년도 동계학술발표대회 논문집
• /
• pp.317-322
• /
• 2005

This study is aimed to analyze the effects of heat pipe shape on the heat transfer in solar collector with a axial grooved heat pipe. In the design of a heat pipe. two of the most important criteria to be met are the operating temperature range and the maximum heat transport capacity, When the operating temperature range is known and the working fluid has been selected, the maximum heat transport capacity depends strongly on capillary pressure and liquid flow. The heat transport capacity of the heat pipe will depend on the geometry of the heat pipe, the wick structure. the vapor channel shape. groove number. cooling temperature. condenser length and pipe diameter. So various shapes are used for mathematical models of two-phase flow in grooved heat pipe. From the results. the adequate groove shape and scale are presented by considering the heat transport and capillary limitation.

• Journal of Welding and Joining
• /
• 제25권5호
• /
• pp.64-71
• /
• 2007

The aim of this paper is to investigate the effects of welding parameters on the weld shape in seal-welding of STS304L capsule for manufacturing a radioisotope source which is widely used in nondestructive testing of metal structures using gamma ray. Pulsed gas tungsten arc (Pulsed GTA) welding is performed for thin cross sectional area of the capsule. Seven welding parameters including current waveform parameters and arc length etc. are selected as main process parameters using design of experiment. The weld shape such as bead width, penetration depth, weld area, aspect ratio and area rate is investigated to assess the effects of welding parameters. As results, the combination of pulse duty/welding speed largely affects on bead width, penetration depth, area and aspect ratio. Finally, it is concluded that the key parameters are the combination of pulse duty/welding speed, base current and arc length, and their optimal conditions are 50%/1.77mm/s, 6.4A and 1 mm.

• 한국양봉학회지
• /
• 제34권2호
• /
• pp.137-140
• /
• 2019

Although honeybees (Apis mellifera) are crucial for maintenance of the ecosystem, population of honeybee has been steadily decreasing due to diseases including nosemosis. Nosemosis is a disease caused by Nosema ceranae and is now considered as a major threat to honeybees. N. ceranae is a microsporidian that stays in form of spore even before the infection, which makes it harder to control than other pathogens. People are now aware of this parasite, however, cure and preventive candidates for nosemosis are hardly found until today. In this study, in vitro experiment of Lespedeza cuneata treatment to prevent nosemosis were done using Trichoplusia ni cell line, BTI-TN5B1-4. Normal T. ni cells exhibited round shape without abnormal size. On the other hand, when N. ceranae were treated, cells deteriorated and some cells abnormally enlarged due to N. ceranae infection. Interestingly, treatment of T. ni cells with L. cuneate extract protected abnormal cell shape induced by N. ceranae infection to normal shape. Some N. ceranae spores were observed outside of the cells. Effective concentration range for N. ceranae control were experimented. Lowest concentration which can control nosemosis were 50 ㎍/mL. When the concentration of L. cuneata extract was exceeded 200 ㎍/mL, cytotoxicity started to show up.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2002년도 학술발표회 발표논문집
• /
• pp.185-188
• /
• 2002

This study is performed to examine the engineering properties of polyprofilene fiber reinforced high flowable concrete. For the estimation of the flow ability and filling ability, the slump flow, box height difference and L-shape filling appearence are measured and compared. The test result shows that the slump flow and L-shape filling appearence is decreased with increase containing polyprofilene fiber and box height difference is increased with increase containing polyprofilene fiber. Also, compressive strength is decreased with increase containing polyprofilene fiber.

• Journal of Ginseng Research
• /
• 제21권2호
• /
• pp.115-118
• /
• 1997

Stratified American ginseng(Panax quinquefoilium L.) seeds were planted in a shaded greenhouse at four depths and in four different soil types to observe effects on emergence rate and root size. Seeding depth affected seedling emergence rates and the number of days required to complete emergence. The shape of the roots was affected by the texture of soil, especially percentage of sand.

• 한국항해학회지
• /
• 제17권1호
• /
• pp.61-78
• /
• 1993

Large offshore structure are to be considered for oil storage facilities , marine terminals, power plants, offshore airports, industrial complexes and recreational facilities. Some of them have already been constructed. Some of the envisioned structures will be of the artificial-island type, in which the bulk of structures may act as significant barriers to normal waves and the prediction of the wave intensity will be of importance for design of structure. The present study deals wave scattering problem combining reflection and diffraction of waves due to the shape of the impermeable rigid upright structure, subject to the excitation of a plane simple harmonic wave coming from infinity. In this study, a finite difference technique for the numerical solution is applied to the boundary integral equation obtained for wave potential. The numerical solution is verified with the analytic solution. The model is applied to various structures, such as the detached breakwater (3L${\times}$0.1L), bird-type breakwater(318L${\times}$0.17L), cylinder-type and crescent -type structure (2.89L${\times}$0.6L, 0.8L${\times}$0.26L).The result are presented in wave height amplification factors and wave height diagram. Also, the amplification factors across the structure or 1 or 2 wavelengths away from the structure are compared with each given case. From the numerical simulation for the various boundary types of structure, we could figure out the transformation pattern of waves and predict the waves and predict the wave intensity in the vicinity of large artificial structures.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1995년도 추계 학술대회논문집
• /
• pp.49-54
• /
• 1995

A numerical analysis on the effect of the front shape on the aerodynamic characteristics of HST model is made, using FVM based general purpose 3D Navier-Stokes eq. solver, TURBO-3D program. Numerical solutions are compared with each case of different front shape for HST model. The result shows a good quantitative aerodynamic characteristic tendencies for variation of front shape of HST. Thus it may be used as a basis in the design of the shape of real HST.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.22-24
• /
• 1997

The 4-pole LHSM was composed of the figure-of-eight shaped 3-phase armature windings. DC field windings, and the segmented secondary with the transverse bar track. The motor was designed on the base of the performance characteristic equations and the equivalent circuit model, with the coefficients of the magnetic shape. These coefficients were computed from the analytical expressions and examined from FEM analysis. The magnetic equivalent circuit of 3-D model of LHSM was obtained. and this concept provided the equivalent models for 2-D FEM analysis. Therefore, the airgap field, the lift and thrust force were calculated and compared with the results of magnetic equivalent circuit method.

• 대한기계학회논문집A
• /
• 제24권9호
• /
• pp.2211-2219
• /
• 2000

Near net shape forming of 316L stainless steel powder was investigated under hot isostatic pressing. To simulate densification and deformation of a powder compact in a container during hot isostatic pressing, the constitutive model of Abouaf and co-workers was implemented into a finite element analysis. An optimal design technique based on the design sensitivity was applied to the container design during hot isostatic pressing. The optimal shape of the container was predicted from the desired final shape of a powder compact by iterative calculations. Experimental data of 316L stainless steel powder showed that the optimally designed container allowed precise forming of the desired powder compact during hot isostatic pressing.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제5권1호
• /
• pp.59-65
• /
• 2002

Parthenogenetic development, hybrid vigour and cocoon shape variability were studied in bivoltine F1 hybrids of the silkworm, Bombyx mori L. Considerable breed differences were observed in parthenogenetic ability. Among the parental breeds, CSR18 exhibited maximum parthenogenetic development (79.65%) followed by CSR4 (67.90%). Among bivoltine F1 hybrids, CSR18 ${\times}$ CSR4 showed highest parthenogenetic development (73.32%) followed by CSR2 ${\times}$ CSR4 (55.43%). Study on hybrid vigour demonstrated that CSR18 ${\times}$ CSR19 expressed maximum significant hybrid vigour for all the seven economic characters over Mid Parent Value (MPV) followed by CSR2 ${\times}$ CSR4 and CSR18 ${\times}$ CSR4 exhibiting significant heterosis for six characters. Cocoon shape measurement study revealed that among ten bivoltine F1 hybrids, cocoons of three hybrids were found comparatively uniform. Importance of this study to know the level of paythenogenetic development, hybrid vigour and cocoon shape variability in different bivoltine F1 hybrids have been discussed.