• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.3
• /
• pp.343-348
• /
• 1986

An optical interference method was developed for measuring rapidly growing and evaporating liquid condensate films (e.g., Na$_{2}$SO$_{4}$, $K_{2}$SO$_{4}$) on solid surface exposed to flowing combustion product gases at film thicknesses well below the onset of complications due to run-off. To develop this optical system, this study investigated the optical parameters (e.g., polarization state, incident angle, target roughness, etc.) Trends for the Na$_{2}$SO$_{4}$(l) and $K_{2}$SO$_{4}$(l) deposition rates as a function of target temperature using this optical measuring system agree with the theoretical prediction of the vapor deposition. This study was able to extend the experimental range for vapor plus condensed phase transport and deposition. While previously unable to measure the evaporation rates interferometrically, these rates are estimated from the results of the investigation of polarization states.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.2
• /
• pp.165-171
• /
• 2010

The Homogeneous Charge Compression Ignition (HCCI) engine concept allows for both NOx and particulate matter to be reduced simultaneously, and it is a promising way to meet the next environmental challenges. Unfortunately, HCCI combustion often increases CO and HC emissions. The development of oxidation catalyst (OC) requires high conversion efficiency for CO and HC at low temperature. Conventional oxidation catalyst technologies may not be able to convert these emissions because of the saturation of active catalytic sites. The OC used in this study was 600 cpsi cordierite. Three kinds of OC with different amounts of Pt and Pd were used. The influence of the space velocity (SV), $H_2O$ and $O_2$ concentration was also studied. All types of OCs were found to have over 90% CO conversion efficiencies at $170^{\circ}C$. When in the presence of water vapor, CO conversion was increased, but $C_3H_8$ conversion was decreased. The performance of the OC was not influenced by initial the HC concentration. The 2Pt/Pd catalyst was better in terms of thermal aging than the Pt-only catalyst. The $LOT_{50}$ of both fresh and aged OC was increased with increasing SV and with the presence of $H_2O$.

• Clinical and Experimental Reproductive Medicine
• /
• v.43 no.2
• /
• pp.126-132
• /
• 2016

Objective: The purpose of this study was to identify useful clinical factors for the identification of patients with polycystic ovary syndrome (PCOS) who would benefit from in vitro maturation (IVM) treatment without exhibiting compromised pregnancy outcomes. Methods: A retrospective cohort study was performed of 186 consecutive patients with PCOS who underwent human chorionic gonadotropin-primed IVM treatment between March 2010 and March 2014. Only the first IVM cycle of each patient was included in this study. A retrospective case-control study was subsequently conducted to compare pregnancy outcomes between IVM and conventional in vitro fertilization (IVF) cycles. Results: Through logistic regression analyses, we arrived at the novel finding that serum $anti-M{\ddot{u}}llerian$ hormone (AMH) levels and the number of fertilized oocytes in IVM were independent predictive factors for live birth with unstandardized coefficients of 0.078 (95% confidence interval [CI], 1.005-1.164; p=0.037) and 0.113 (95% CI, 1.038-1.208; p=0.003), respectively. Furthermore, these two parameters were able to discriminate patients who experienced live births from non-pregnant IVM patients using cut-off levels of 8.5 ng/mL and five fertilized oocytes, respectively. A subsequent retrospective case-control study of patients with PCOS who had serum AMH levels ${\geq}8.5ng/mL$ showed that IVM had pregnancy outcomes comparable to conventional IVF, and that no cases of ovarian hyperstimulation syndrome were observed. Conclusion: Serum AMH levels are a useful factor for predicting pregnancy outcomes in PCOS patients before the beginning of an IVM cycle. IVM may be an alternative to conventional IVF for PCOS patients if the patients are properly selected according to predictive factors such as serum AMH levels.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.88-89
• /
• 2013

A variety of influenza A viruses from animal hosts are continuously prevalent throughout the world which cause human epidemics resulting millions of human infections and enormous industrial and economic damages. Thus, early diagnosis of such pathogen is of paramount importance for biomedical examination and public healthcare screening. To approach this issue, here we propose a fully integrated Rotary genetic analysis system, called Rotary Genetic Analyzer, for on-site detection of influenza A viruses with high speed. The Rotary Genetic Analyzer is made up of four parts including a disposable microchip, a servo motor for precise and high rate spinning of the chip, thermal blocks for temperature control, and a miniaturized optical fluorescence detector as shown Fig. 1. A thermal block made from duralumin is integrated with a film heater at the bottom and a resistance temperature detector (RTD) in the middle. For the efficient performance of RT-PCR, three thermal blocks are placed on the Rotary stage and the temperature of each block is corresponded to the thermal cycling, namely $95^{\circ}C$ (denature), $58^{\circ}C$ (annealing), and $72^{\circ}C$ (extension). Rotary RT-PCR was performed to amplify the target gene which was monitored by an optical fluorescent detector above the extension block. A disposable microdevice (10 cm diameter) consists of a solid-phase extraction based sample pretreatment unit, bead chamber, and 4 ${\mu}L$ of the PCR chamber as shown Fig. 2. The microchip is fabricated using a patterned polycarbonate (PC) sheet with 1 mm thickness and a PC film with 130 ${\mu}m$ thickness, which layers are thermally bonded at $138^{\circ}C$ using acetone vapour. Silicatreated microglass beads with 150~212 ${\mu}L$ diameter are introduced into the sample pretreatment chambers and held in place by weir structure for construction of solid-phase extraction system. Fig. 3 shows strobed images of sequential loading of three samples. Three samples were loaded into the reservoir simultaneously (Fig. 3A), then the influenza A H3N2 viral RNA sample was loaded at 5000 RPM for 10 sec (Fig. 3B). Washing buffer was followed at 5000 RPM for 5 min (Fig. 3C), and angular frequency was decreased to 100 RPM for siphon priming of PCR cocktail to the channel as shown in Figure 3D. Finally the PCR cocktail was loaded to the bead chamber at 2000 RPM for 10 sec, and then RPM was increased up to 5000 RPM for 1 min to obtain the as much as PCR cocktail containing the RNA template (Fig. 3E). In this system, the wastes from RNA samples and washing buffer were transported to the waste chamber, which is fully filled to the chamber with precise optimization. Then, the PCR cocktail was able to transport to the PCR chamber. Fig. 3F shows the final image of the sample pretreatment. PCR cocktail containing RNA template is successfully isolated from waste. To detect the influenza A H3N2 virus, the purified RNA with PCR cocktail in the PCR chamber was amplified by using performed the RNA capture on the proposed microdevice. The fluorescence images were described in Figure 4A at the 0, 40 cycles. The fluorescence signal (40 cycle) was drastically increased confirming the influenza A H3N2 virus. The real-time profiles were successfully obtained using the optical fluorescence detector as shown in Figure 4B. The Rotary PCR and off-chip PCR were compared with same amount of influenza A H3N2 virus. The Ct value of Rotary PCR was smaller than the off-chip PCR without contamination. The whole process of the sample pretreatment and RT-PCR could be accomplished in 30 min on the fully integrated Rotary Genetic Analyzer system. We have demonstrated a fully integrated and portable Rotary Genetic Analyzer for detection of the gene expression of influenza A virus, which has 'Sample-in-answer-out' capability including sample pretreatment, rotary amplification, and optical detection. Target gene amplification was real-time monitored using the integrated Rotary Genetic Analyzer system.

• Korean journal of applied entomology
• /
• v.61 no.1
• /
• pp.91-100
• /
• 2022

Ticks are the arthropod vector capable of transmitting diverse pathogens, which include bacteria, viruses, protozoan and fungi. Ticks are able to survive under stressful environmental conditions. One of evolutionary outcomes of these obligatory hematophagous arthropods is the survival for extended periods of time without a blood meal during off-host periods. Water conservation biology and heat tolerance have allowed ticks to thrive even under high temperatures and low relative humidity, thus they have become highly successful arthropods as they are distributed globally. Tick osmoregulatory physiology is a complex mechanism, which involves multiple osmoregulatory organs (salivary glands, Malpighian tubules, hindgut and synganglion) for the acquisition and excretion of water and ions. Blood feeding and water vapor uptake have been early reported as the primary passages for ixodid tick to acquire water. Recently, we have learned that ticks can actively drink environmental water allowing hydration. The acquired water can be traced to the salivary glands (type I acini) and the midgut diverticula. This opens new avenues for tick management through the delivery of toxic agents into their drinking water, in addition to an alternative strategy for the study of tick physiology. Here we address the osmoregulatory physiology in the ixodid ticks as a potential target physiological mechanism for tick control. We discuss the implications of water drinking behavior for tick control through the delivery of toxic agents and discuss the dermal excretion physiology as an additional pathway to induce tick dehydration and tick death.

• Journal of architectural history
• /
• v.1 no.1 s.1
• /
• pp.68-87
• /
• 1992

This study is the conditions of location according to formed the times in the clan village. The results of this study are as follows ; 1. in the 15th century, the characterestics of the village established residencial place where mountain stream flowed surrounded by the mountain and deep in the mountains with superior quality land. That's because Sa-dae-bu put equal importance on beautiful scenery and practical benefit for living. Stream House provided economical foundation for Sa-dae-bu to be able to keep confucial manners by putting limit their economic status to small medium sized land owner. Topographical condition such as valley or hollow separated from the exterior maintained unification of consanguineous village in self sufficient farming society and held on to independent territory against external to be able to stay away from turbulent days so that they formed residential area of Sa-dae-bu clan. And the valley where flowed clean water was considered as the connection of continuous place where distinctiveness of form in each curve and and factor of calm and dynamic scenery of the clean stream. Scholars in the middle of Chosun Dynasty located in the utopia as place for confucious retirement to study, a place for refinement by combination with the nature or as a way of spacial practice based on Confucious view of nature. 2. in the 16th-l7th century, Most of existing consanguineous villages adopt deep in the mountains for refuge. at that place, upward rank was established by settlement of the ancestor who entered in the village first, the principal was placed in the center of the village and since descendants became numerous, it was serialized as the space of descendants. So, it was arranged in the order of social rank. Most of the villages showed development step by step started from precaution by apperance of the mountain to the lower part. It's because the topography of valley around the village worked as the natural hedge against external force and genealogy of the clan, regularity of social status, order of entrance into the village were reflected into residencial destribution. Also, order of the rank coincided with the one of aspects on geomancy. Genealogical rank within the village represented spacial rank. Houses of descendants and branch families were placed lower than the principal which showed worship to the principal. 3. In 18th century after, as the village was settled nearby cultivated land considering economical loss caused by long distance between residencial area and cultivated land, direction of sect followed by development of village expanded from the front part of the village to the rear part. The principal that was poped out to the front presented frontage over exterior. Therefore, residencial area of branch families expanded to the rear starting from the principal. This represented a slice of social structure at that time. after 18th century, spirit was percieved superior over material, After then, development of cultivation and expantion of land created difference of economic strength within one village. In order to maintain and show off the status of Yang-ban, economic power of indigenous land owner became fundamental, so, sense to worship and to keep the principal became weak eventually. Taking advantage of that situation, residencial area of branch family expanded to the rear part of the principal which showed dual disposition conflicted with each other. However, these clan rules were destroyed and new rules were created after 18th century because of the situation and consciousness at that time.

• Journal of Life Science
• /
• v.33 no.5
• /
• pp.391-396
• /
• 2023

Milk is an emulsion, improving texture of surimi mixture and able to suppress off flavors and abnormal tastes. Therefore, this study aimed to identify the effective properties of milk in the preparation of a surimi mixture for 3D printing. The sensory and physical properties of surimi mixtures containing 0%, 20 wt%, and 40 wt% milk were evaluated, where the unheated surimi mixture with added milk demonstrated increased firmness and adhesiveness compared to the negative control group. In addition, the hardness, adhesiveness, gumminess, and chewiness of the mixture containing 40% milk were highest, but springiness, cohesiveness, and resilience were lowest. In the sensory evaluation, as the amount of milk increased, a fishy smell, abnormal taste and texture improved, hardness and preference increased as well. From these results, it was confirmed that a surimi mixture can be prepared with milk to improve its physical and sensory properties for 3D printing when compared to the negative control mixture. In particular, it was revealed that the physical properties and preference of the surimi mixture are best when prepared with 40% milk.