• Nuclear Engineering and Technology
• /
• 제52권5호
• /
• pp.1066-1078
• /
• 2020

The present paper describes an analytic solution procedure for flexural vibration of a rotationally restrained hinged-hinged Timoshenko beam at the supports during an earthquake. Focusing on maximal magnitudes of internal loads such as bending moment and shearing force under wide variations of two parameters, kL/EI and kGAL²/EI, various beams under synchronous and asynchronous support motions are simulated. The simulations under asynchronous support motions show the following facts. The variations of the maximal magnitudes of internal loads of stocky beams due to the variation of kL/EI from zero to infinity show much wider variations than those of slender beams as kGAL²/EI decreases. The maximal magnitudes of internal loads of a beam tend to be governed by their static components as kL/EI increases and kGAL²/EI decreases. When the internal loads are governed by their static components, maximal magnitudes of internal loads of the stocky tend to increase monotonically as the value of kL/EI increases. However, the simulations under synchronous support motions show the static components of the internal loads vanish and the internal loads are governed by dynamic components irrespective of the two parameters.

• 한국산학기술학회논문지
• /
• 제10권5호
• /
• pp.1009-1019
• /
• 2009

본 연구에서는 우리나라 수위관측소들 중에서 관측 유량이 검증된 총 19개 유역을 선정하고 관측된 홍수량을 사용하여 적정 설계홍수량을 유도함으로써 우리나라의 설계홍수량 특성을 분석하였다. 대상유역별로 관측개시 년도에서부터 분석 시작년을 기준으로 1년씩 증가 시키는 점진적 구성 방식으로 연최대홍수량에 대한 빈도분석을 실시하기 위해, 변동특성을 이동평균법에 의해 분석하였다. 19개 대상유역에 대한 연최대홍수량 계열 구성기간별로 기본통치를 산정하고 독립성, 동질성 및 Outiler 검정을 실시하였다. Gumbel, Generalized Extreme Value, Generalized Logistic 및 Generalized Pareto 분포의 적합도 검정을 LH-모멘트비도와 Kolmogorov-Smirnov 검정에 의해 수행하였다. 적정 확률분포로 선정된 GEV 분포의 매개변수를 확률가중모멘트의 치수 변화에 의한 L, L1, L2, L3 및 L4-모멘트법에 의해 추정하고 대상유역 및 연최대홍수량 계열 구성 기간별 설계홍수량을 유도하였다. 본 연구에서 사용한 변동률 분석에 따라 최근 지구온난화에 따른 우리나라 기후 변화를 고려한 적절한 수리구조물의 설계 조건변경시기는 2002년 전후로 하여야 할 것이다.

• Communications for Statistical Applications and Methods
• /
• 제16권4호
• /
• pp.647-658
• /
• 2009

It is already known from the previous study that flood seems to have heavier tail. Therefore, to make prediction of future extreme label, some agreement of tail behavior of extreme data is highly required. The LH-moments estimation method, the generalized form of L-moments is an useful method of characterizing the upper part of the distribution. LH-moments are based on linear combination of higher order statistics. In this study, we have formulated LH-moments of five distributions useful in hydrology such as, two types of three parameter kappa distributions, beta-${\kappa}$ distribution, beta-p distribution and a generalized Gumbel distribution. Using LH-moments reduces the undue influences that small sample may have on the estimation of large return period events.

• International Journal of Safety
• /
• 제7권1호
• /
• pp.35-38
• /
• 2008

The purpose of this study is to extract typical body shape of Korean VDT workers based on the three-dimensional Korean shape data and recommendation supported by Korea Occupational Safety & Health Agency during VDT task. Desirable desk heights and chair heights for the selection of the VDT working posture is proposed by analyzing moment, compression and joint shear for lumbar and spine of Korean adult(male and female). The desirable heights for desk and chair can be selected by the least load method during VDT tasks. In the current work the figures of Korean 50th percentile offered by CATIA-HUMAN are used as the average body type of the grown-ups and this research is accomplished with the recommended size of all working attitude such as the height of a monitor except for the height of desk and chair and the degree of watching the monitor.

• Steel and Composite Structures
• /
• 제11권1호
• /
• pp.77-91
• /
• 2011

This study experimentally evaluated the seismic performance of steel knee braced frame structures with energy dissipation mechanism. A series of cyclic load tests were conducted on the steel moment resisting frames and the proposed knee braced frames. Test results validated that the demand in the beam-to-column connection designs was alleviated by the proposed design method. Test results also showed that the strength and stiffness of the proposed design were effectively enhanced. Comparisons in energy dissipation between the steel moment resisting frames and the steel knee braced frames further justified the applicability of the proposed method.

• 한국자동차공학회논문집
• /
• 제24권1호
• /
• pp.33-38
• /
• 2016

The turbocharger is an essential component to realize the engine down-sizing. The moment of inertia of turbocharger rotor is an important parameter with respect to acceleration performance of the vehicle. It can be calculated from the CAD software based the geometry data and the material properties. But the accurate value of the inertia of turbocharger rotor must be measured through the experimental method. In this study, the measurement of moment of inertia of turbocharger rotor for 2.0 L spark-ignition engine was carried out. First, an experimental equipment using a trifilar method was designed and fabricated. Some optical devices, that is, photo sensor, counter, convex lens, etc, were used to increase the accuracy of the measurement. Second, error sensitivity for the equipment was analyzed. The error of period time and the radius can give big affects to the accuracy of the moment of inertia. When the amount of error of these two were each 1.0 %, maximum error of the moment of inertia was under 3.0 %. Third, the calibration for the equipment was performed using a calibration rotor which has similar shape to turbine rotor but simple. Calculated value from CAD software and measured one for the calibration rotor were compared. The total error of the equipment and the measurement is about 1.3 %. This result shows that the equipment can give the good result with resonable accuracy. Finally the moment of inertia of the turbine rotor and compressor wheel were measured. The coefficient of variations, the ratio of standard deviation to mean value, were reasonably small at 0.57 % and 0.73 % respectively. Therefore this equipment is suitable for the measurement of the moment of inertia of the turbine rotor and compressor wheel.

• 한국농공학회지
• /
• 제45권5호
• /
• pp.97-109
• /
• 2003

This study is mainly conducted to derive the design drought rainfall by the consecutive duration using probability weighted moments with rainfall in the regional drought frequency analysis. It is anticipated to suggest optimal design drought rainfall of hydraulic structures for the water requirement and drought frequency of occurrence for the safety of water utilization through this study. Preferentially, this study was conducted to derive the optimal regionalization of the precipitation data that can be classified by the climatologically and geographically homogeneous regions all over the regions except Cheju and Ulreung islands in Korea. Five homogeneous regions in view of topographical and climatological aspects were accomplished by K-means clustering method. Using the L-moment ratio diagram and Kolmogorov-Smirnov test, generalized extreme value distribution was confirmed as the best fitting one among applied distributions. At-site and regional parameters of the generalized extreme value distribution were estimated by the method of L-moments. Design drought rainfalls using L-moments following the consecutive duration were derived by the at-site and regional analysis using the observed and simulated data resulted from Monte Carlo techniques. Relative root-mean-square error (RRMSE), relative bias (RBIAS) and relative reduction (RR) in RRMSE for the design drought rainfall derived by at-site and regional analysis in the observed an simulated data were computed and compared. In has shown that the regional frequency analysis procedure can substantially more reduce the RRMSE. RBIAS and RR in RRMSE than those of at-site analysis in the prediction of design drought rainfall. Consequently, optimal design drought rainfalls following the regions and consecutive durations were derived by the regional frequency analysis.

• Bulletin of the Korean Chemical Society
• /
• 제19권9호
• /
• pp.934-942
• /
• 1998

$^13CO$ chemisorbed on platinum particles in L-zeolite has been investigated by static and magic angle spinning NMR spectroscopy. The representative spectra are composed of a broad asymmetric peak with a center of gravity at 230±30 ppm and a sharp symmetric peak at 124±2 ppm which is tentatively assigned to physisorbed $CO_2$, on inner walls of L-zeolite. Overall, the broad resonance component is similar to our previous results of highly dispersed (80-96%) CO/Pt/silica or CO/Pt/alumina samples, still showing metallic characters. The principal difference is in the first moment value. The broad peak in the spectra is assigned to CO linearly bound to Pt particles in the L-zeolites, and indicates a distribution of isotropic shifts from bonding site to bonding site. The NMR results reported here manifest that the Pt particles inside of the L-zeolites channels are not collectively the same with the ones supported on silica or alumina with similar dispersion in terms of Pt particle shape and/or ordering of Pt atoms in a particle. As a result, Pt particles of CO/Pt/L-zeolite were agglomerated accompanying CO desorption upon annealing. There were no definite changes in the NMR spectra due to differences of exchanged cations. Comparison of our observation on CO/Pt/L-zeolite with Sharma et al.'s reveals that even when the first moment, the linewidtb, and the relaxation times of the static spectra and the dispersion measured by chemisorption are similar, the properties of Pt particles can be dramatically different. Therefore, it is essential to take advantage of the strengths of several techniques together in order to interpret data reliably, especially for the highly dispersed samples.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 2004년도 하계종합학술발표회논문초록집
• /
• pp.364-364
• /
• 2004

• 한국지구과학회지
• /
• 제29권2호
• /
• pp.117-127
• /
• 2008

한반도와 그 주변에서 발생한 44개의 지진에 대한 지진원 상수들을 결정하여 그들 사이의 관계를 조사하였다. 모서리 주파수와 지진모멘트의 결정에는 Snoke(1987)의 방법을 적용하였다. 일반적으로 하나의 지진에 대하여 다른 관측소에서 결정된 지진원 상수들은 서로 다른 값을 보여 준다. 이러한 불일치는 지진원에서의 에너지 확산과 전파과정중의 감쇠 및 증폭의 방향별 차이에 대한 불충분한 고려에서 기인하는 것으로 해석된다 이러한 방향에 따른 효과를 제거하기 위하여 모서리 주파수와 지진모멘트는 평균값을 취했으며, 이 평균값으로부터 다른 지진원 상수들을 결정하였다. 이 연구에서 구한 정적인 응력강하량은 일정한 크기 이상의 지진에 대하여 지진모멘트와 무관한 경향을 보여 준다. 지진모멘트가 대략 $1.0{\times}10^{22}$ dyne-cm($M_L = 4.0$에 대응) 이하인 지진은 지진모멘트가 감소함에 따라 응력강하량이 감소하는 경향을 보여준다. 이 사실은 어떤 한계규모 이하의 지진에서 지진원 상수들 사이의 비례법칙이 깨짐을 의미한다.