• 제목/요약/키워드: L-filter

검색결과 1,059건 처리시간 0.038초

전북지역 하수처리수 재이용 방안 연구 (A Study on Reuse of Reclaimed Water in Jeonbuk Province)

  • 조창우;김진태;박정제;송주훈;이미선;정주리;류재웅
    • 대한환경공학회지
    • /
    • 제39권5호
    • /
    • pp.237-245
    • /
    • 2017
  • 본 연구는 전라북도 내 하수처리장 방류수를 효율적으로 재이용하기 위해 일일 방류량이 $5,000m^3$ 이상 되는 12개 하수처리장을 대상으로 방류수 수질을 조사하고 처리장 주변 현황을 파악하여 용도별 재이용 가능성을 제안하는데 목적을 두었다. 추가적으로 방류수를 재처리하기 위한 실험실규모의 실험도 수행하였다. 방류수는 7개 용도별 수질기준에 근거하여 중금속 16개 항목을 포함한 총 28개 항목을 수질 분석하였다. 분석결과 부적합 항목은 색도, BOD, TN, SS, 염화물, 전기전도도 등 6개 항목이며, 색도와 TN이 각각 8개소, 5개소로 가장 높았다. 유입원수가 공단폐수 및 음식물처리수가 유입되는 처리장의 경우 염화물과 전기전도도가 높았다. 방류수 재처리없이 직접 재이용수로 가능한 처리장은 4개소였다. 실험실 규모의 실험(Lab test)은 모래여과(SF)-활성탄흡착(GAC)-정밀여과(MF)-역삼투압(RO) 순으로 실험을 수행하였다. 총대장균군, 색도, 부유물질(SS) 제거는 SF와 GAC조합이 경제성과 처리 효율면에서 가장 적절하였으며, 염화물과 전기전도도는 SF, GAC, MF에서는 큰 효과가 없었으며, RO처리 후 90% 이상의 제거효율을 보였다. $UV_{254}$는 원수가 0.3651/cm에서 SF-GAC공정 후 0.0306/cm로 92% 이상의 높은 제거효율을 보였다. 중금속 중 총붕소(B-total)는 SF-GAC-MF-RO 처리 후 0.7054 mg/L에서 0.0854 mg/L로 88% 제거효율을 보였다. 결론적으로 각 처리장은 방류수 수질분석결과와 주변 지형을 고려하여 방류수 재이용 용도를 선택하여야 한다. 또한 재처리가 필요한 경우 처리할 수질 항목과 처리비용을 고려한 처리방법을 결정하는 것이 적절하다고 판단된다.

고온처리(高溫處理)에 의한 우유(牛乳)의 미생물(微生物) 및 화학적(化學的) 변화(變化)에 관한 연구(硏究) (Studies on Microbiological and Chemical Changes of Milk Treated by High Temperature)

  • 신용국;김종우
    • 농업과학연구
    • /
    • 제13권2호
    • /
    • pp.198-209
    • /
    • 1986
  • 우리나라 원유(原乳)의 세균함량(細菌含量)과 가열처리(加熱處理)에 의한 일부(一部) 단백질(蛋白質)의 변성(變性)을 고려한 적정살균온도(適正殺菌溫度)와 시간(時間)을 구명(究明)하고자 $70^{\circ}C{\sim}100^{\circ}C$까지 $5^{\circ}C$간격(間隔)으로 10, 15 및 20 초간 살균(殺菌)을 행(行)하여 다음과 같은 결과(結果)를 얻었다. 1. 살균온도(殺菌溫度)와 시간(時間)에 따라 사멸효과(死滅效果)는 우수(優秀)하였으며 $75^{\circ}C$에서 20초간(秒間) 살균처리유(殺菌處理乳)에서 99.56%의 사멸율(死滅率)을 나타내어 시유처리기준(市乳處理基準) 부합(符合)되었다. 대장균(大腸菌)은 열처리(熱處理)에 의하여 전멸(全滅)하였고, 내열성균(耐熱性菌)은 $100^{\circ}C$의 열처리(熱處理)에도 다수 잔존(殘存)하였다. 또한 호열성균(好熱性菌)은 열처리(熱處理)에 의하여 대부분(大部分) 사멸(死滅)하였고, 호냉성균(好冷性菌)은 $90{\sim}100^{\circ}C$에서 전멸(全滅)하였다. 2. Bacillus subtilis 첨가유(添加乳)의 사멸율(死滅率)은 살균온도(殺菌溫度)가 높고 가열시간(加熱時間)이 길수록 높았으나, $100^{\circ}C$에서는 거의 일정수준(一定水準)을 유지(維持)하였다. 3. 살균온도(殺菌溫度)가 높고 가열시간(加熱時間)이 길수록 pH는 감소(減少)하였다. 4. 가열(加熱)에 따른 단백질(蛋白質), 지방(脂肪) 및 유당(乳糖)의 변화(變化)는 거의 없었다. 5. 가열온도(加熱溫度)에 따라 총질소(總窒素)는 거의 변화(變化)가 없었고 casein태질소(態窒素)와 NPN은 증가(增加)하였으며 비(非)casein태질소(態窒素)는 감소(減少)하였다. 6. 살균온도(殺菌溫度)가 높고 가열시간(加熱時間)이 길수록 질소여과율(窒素濾過率)은 감소(減少)하였으며 특(特)히 $95{\sim}100^{\circ}C$에서 급격(急激)히 감소(減少)하였다. 7. 인공소화율(人工消化率)은 열처리(熱處理)에 의하여 다소 증가(增加)하였다.

  • PDF

세 수준의 자당이 첨가된 배지에서 유기물의 첨가 유무에 따른 Solanum tuberosum L.의 기내 광혼합영양생장 (Photomixotrophic Growth of Solanum tuberosum L. in vitro with Addition and Omission of Organic Materials at Thee Initial Sucrose Levels in the Medium)

  • 정병룡;양찬석;김경희;박영훈
    • 생물환경조절학회지
    • /
    • 제13권1호
    • /
    • pp.51-55
    • /
    • 2004
  • 식물의 조직배양에서 가장 널리 이용되는 MS 배지 등의 무기성분은 종속영양에 적합하도록 조성되었다. 그러므로 이들 배지가 혼합영양이나 독립영양 배양에는 부적합 할 수 도 있다. 광혼합영양 미세증식에서 배지에 첨가되는 당의 수준은 낮추고 배양기의 광과 $CO_2$ 수준은 올리며, 광합성의 의한 탄소의 획득을 증진시키기 위해 열록소가 있는 절편체를 이용한다. Factorial 실험에서 유기물 (OM, $m^{-3}$ 배지당 각각 0.5g의 thiamine, nicotinic acid 및 pyridoxine과 100g ${\cdot}$ $m^{-3}$ myo-inositiol)의 첨가(+)와 생략(_) 및 세 가지 수준의 당(0, 15 및 30 kg ${\cdot}$ $m^{-3}$)이 감자 소식물체의 생장에 미치는 영향을 조사하였다. 단엽단절 절편체를 0.1${\times}$$10^{-4}m^{-3}$의 MS 아가(8 kg ${\cdot}$ $m^{-3}$) 배지(증기소독 전 pH 5.80)배지가 담긴 유리 시험관(100mm${\times}$25mm)에 치상하여 직경 6mm의 가스투과 필터(5.1 air exchanges ${\cdot}$$h^{-1}$)가 부착된 투명한 필름으로 봉하여 배양하였다. 배양체는 27일간 $23^{\circ}C$, 50% RH에서 16 h ${\cdot}$ $d^{-1}$의 명기 동안에 cool white 형광등으로 130${\mu}mol\;{\codt}\;m\;{\codt}\;s^{-1}$ PPFD의 광과 350-450${\mu}mol\;{\codt}\;mol^{-1}의CO_2$가 공급되는 배양실에서 배양되었다. 유기물이 공급된 처리(+OM)와 공급되지 않은 처리(-OM)에서 감자 소식물체의 생육은 유사하였으나 배지의 pH는 후자에서 0.2 더 낮았다. 배지에 첨가된 당의 수준이 증가할수록 건물중, % 건물율 및 경경은 증진된데 반해 신초와 뿌리의 건물중 비율, 엽면적, 건물중당 엽록소 함량 및 배지의 pH는 감소하였다. 유기물과 당 수준간의 상호작용도 신초길이와 배지 pH에서 관찰되었다. 이상의 결과로부터 광도와 $CO_2$농도를 높인 광혼압영양배양에서 감자 소식물체의 생장에는 배지에 첨가되는 당은 유익하지만 그 이외의 유기물은 첨가하지 않아도 악영향이 없다는 것은 나타낸다.

한산도-거제도 동부 굴 양식장주변에서 식물플랑크톤의 계절적 분포특성 (Seasonal Distributional Characteristics of Phytoplankton Adjacent to the Oyster Farming Area of Hansan-Geoje Island)

  • 임영균;백승호
    • 환경생물
    • /
    • 제36권4호
    • /
    • pp.647-658
    • /
    • 2018
  • 본 연구에서는 2016년 6월부터 12월까지 통영 한산도 및 거제 동부 굴 양식장 밀집해역의 환경요인의 변동에 따른 식물플랑크톤 군집변화의 계절특성을 파악하고자 하였다. 조사기간 동안 수온은 $14{\sim}28.8^{\circ}C$로, 염분은 29.4~34.2 psu의 범위로 변화하였다. 질산염+아질산염의 농도는 6~7월 동안 표층에서 $3.0{\mu}M$ 전후로, 8월과 9월초까지 제한농도 이하로, 그 후 9월말부터 점차적으로 증가하는 양상을 보였다. 암모니아는 전반적으로 낮게 나타나 계절적 특성이 뚜렷하지 않았다. 인산염은 표층에서 $0.01{\sim}0.7{\mu}M$의 범위로 보였고, 질산염+아질산염과 유사한 계절적 변화를 보였다. 규산염 평균농도는 표층에서 $10.7{\mu}M$과 저층에서 $15.7{\mu}M$로, 전 계절에 있어 식물플랑크톤의 성장에 제한인자로 작용하지 않았다. 식물플랑크톤 군집조성은 규조류, 와편모조류, 은편모조류의 비율은 각각 61.2%, 22.5%, 13.6%로 관찰되었다. 6월말, 외측해역(T1정점)을 중심으로 와편모조류 Prorocentrum donghaiense가 우점하였고, 이후 7월 Cryptomonas spp.와 규조류 Chaetoceros spp.가 상대적으로 높게 점유하였다. 태풍 이후 성층이 붕괴된 9월말에서 10월까지 규조류 Pseudonitzschia spp.와 Chaetoceros spp.가 전 정점에서 우점하였으며, 12월에는 와편모조류 A. sanguinea가 최대 $1.7{\times}10^5cells\;L^{-1}$로 적조주의보 수준으로 높게 관찰되었다. 결과적으로 거제도 한산도주변해역에서는 계절적 성층의 형성과 소멸에 따른 식물플랑크톤 군집조성의 차이가 나타났고, 환경요인의 변화는 일차생산자인 식물플랑크톤 생물량(biomass) 변동에도 영향을 미칠 수 있으며, 이는 양식굴산업의 생산에도 직결될 것으로 판단된다.

Sensory Information Processing

  • Yoshimoto, Chiyoshi
    • 대한의용생체공학회:의공학회지
    • /
    • 제6권2호
    • /
    • pp.1-8
    • /
    • 1985
  • The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

  • PDF

High Resolution HC$_3$N Observations toward the Central Region of Sagittarius B2

  • H.S-Ching;Oh, M.ishi;M.Morimoto
    • 한국우주과학회:학술대회논문집(한국우주과학회보)
    • /
    • 한국우주과학회 1993년도 한국우주과학회보 제2권2호
    • /
    • pp.17-17
    • /
    • 1993
  • The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

  • PDF

탈핵 후 동결한 MII 난자의 활성화 시기가 체세포 핵치환 이후 소 난자의 체외발달에 미치는 영향 (In vitro Development of Somatic Cell Nuclear Transferred Bovine Embryos Following Activation Timing in Enucleated and Cryopreserved MII Oocytes)

  • 박세필;김은영;김선균;이영재;길광수;박세영;윤지연;이창현;정길생
    • 한국가축번식학회지
    • /
    • 제26권3호
    • /
    • pp.245-252
    • /
    • 2002
  • 본 연구는 체세포 핵치환에 탈핵 후 통격한 소미수정란을 사용함에 있어서, MVC 초자화 동결방법과 탈핵난자의 활성화시기가 융해 후 생존율과 핵치환 이후 체외 발달에 미치는 영향을 조사하고자 실시하였다. 체외에서 20시간 동안 체외성숙된 소 미수정란은 수핵란으로 사용하기 위하여 5$\mu\textrm{g}$/$m\ell$ hoechst 처리 후, 형광현미경하에서 핵을 제거하였다. 본 실험은 세 그룹으로 나누어 실행되었다 Group I은 동결하지 않고 핵치환을 한 대조군이며, group III와 group II는 핵이 제거된 난자를 MVC 방법으로 동결하기 전과 후에 활성화 처리 (5$\mu\textrm{m}$의 ionomycin에 의해서 5분간 처리) 한 군이다. 초자화 동결을 위해서는 group II와 group III의 탈핵란은 EG10에서 5~10분간 전처리하고 EG30에서 30초간 노출하여 액체 질소에 침지하였다. 융해는 37$^{\circ}C$에서 4단계로 이루어졌다. 실험군은 모두 소 귀세포를 이용하여 핵치환을 실시하였으며, 전핵을 유도하기 위한 활성화를 위해서는 10$\mu\textrm{g}$/$m\ell$ cycloheximide와 2.5$\mu\textrm{g}$/$m\ell$ cytochalasin D)가 첨가된 CRlaa 배양액에서 1시간, 이후 10 $\mu\textrm{g}$/$m\ell$ cycloheximide가 들어있는 CRlaa 배양액에서 4시간동안 배양하였다. 활성화 처리가 끝난 난자들은 CRlaa 배양액에서 2일간 배양하여 난할이 유도된 난자만을 선별하여 난구세포와 7일 동안 공배양하였다. 동결 융해 이후 group II와 group III의 탈핵된 소 미수정란의 체외 생존율은 81.0%와 84.9%로 유의적인 차이가 없었다. 체세포와 수핵란과의 융합율도 각각 69.0%와 70.0%로 대조군 (75.2%) 과도 유의적인 차이를 나타내지 않았다. 난할율은 53.4%와 58.4%로 group II와 group III간에 유의적인 차이를 나타내지 않았지만 group II의 분할된 세포질을 가진 이상난자의 비율이 group III보다 유의하게 높게 나타났다 (P<0.05). 또한, morula 이상으로 발달율도 group II (8.6%) 에서 group III (15.6%)보다 낮은 결과를 얻었다 하지 만 group III (15.6%)의 체외 발달율은 대조군 (24.8%)과 유의한 차이를 없었다. 따라서, MVC 동결 방법은 탈핵된 소 미수정란을 동결하기에 적합한 방법이며, 탈핵 후 activation을 유도하고 초자화 동결한 난자는 동결하지 않은 신선란과 동일하게 체세포 핵치환에 유용하게 이용될 수 있으리라 사료된다.

수용성 탄수화물을 이용한 분뇨슬러리 pH 적정화 및 암모니아 휘산의 저감 (Optimizated pH and Mitigated Ammonia Emission in Pig Manure Slurry by Soluble Carbohydrate Supplementation)

  • 임정수;황옥화;이상룡;조성백;곽정훈;이동현;정민웅;한덕우
    • 유기물자원화
    • /
    • 제25권1호
    • /
    • pp.103-110
    • /
    • 2017
  • 우리나라 양돈 농장 내 돈사의 대부분은 고밀도 사육에 적합한 피트형 구조를 가지고 있다. 피트형 돈사는 돼지의 배설물이 바닥의 공간에 장기간 저장되는 구조로서 기존의 돈사에 비해 분뇨 처리를 위한 노동비용이 크게 절감되는 장점이 있다. 그러나 피트에 저장된 분뇨슬러리는 암모니아를 비롯하여 다양한 냄새물질을 지속적으로 배출하여 돼지와 근로자의 건강을 위협하게 된다. 축산업의 역사가 오래된 축산 선진국에서는 이러한 문제를 해결하기 위해 슬러리 첨가제, 스크러버, 바이오필터 등을 개발하였으며 우리나라 역시, 점차 고밀도 사육 방식이 확산됨에 따라 냄새저감 수단에 대한 수요가 빠르게 증가하고 있다. 특히 최근에는 돈사 피트에 직접 투여하는 미생물제의 보급이 빠르게 확대되고 있다. 미생물제는 구매 비용이 높다는 단점에도 불구하고 운반, 저장, 사용이 편리하고 상대적으로 유지비가 저렴하여 소규모 양돈 농가에서 많이 선택되고 있다. 이러한 미생물제와 비교하여 유사한 효과를 발휘하면서도 비용이 훨씬 저렴한 냄새저감 수단으로서 수용성 탄수화물이 있다. 수용성탄수화물이란 설탕, 포도당, 당밀과 같이 분자량이 적은 단당류 또는 이당류 등을 포함하며 분뇨슬러리에 용해된 이후 빠르게 미생물에 의해 이용될 수 있는 탄소화합물을 의미한다. 분뇨 내 미생물은 투여된 수용성 탄수화물을 분해하여 이산화탄소 및 각종 유기산을 생산함으로 슬러리를 산화시키는 효과를 발휘한다. 산화된 슬러리 내에서 비이온성인 암모니아는 이온성인 암모늄 이온으로 전환되어 휘발성을 잃게 된다. 본 연구에서 대표적인 수용성 탄수화물인 설탕을 돈분뇨 슬러리(120kg)에 0.1%(w/w) 투여함으로서 슬러리의 pH를 8.2 수준으로 유지하였고 암모니아의 휘발은 10일 평균 33% 저감하는 효과를 얻었다. 결론적으로 본 연구의 결과를 돈사 현장에서 활용한다면 미생물제에 비해 보다 저렴한 비용으로 피트 슬러리의 암모니아 휘발을 저감할 수 있을 것으로 예상된다.

온도와 PEG에 대한 대두품종의 발아 및 묘신장 반응 (Varietal Responses of Soybean Germination and Seedling Elongation to Temperature and Polyethylene Glycol Solution)

  • 성락춘;정해준;홍은희
    • 한국작물학회지
    • /
    • 제33권1호
    • /
    • pp.31-37
    • /
    • 1988
  • 온도(15$^{\circ}C$ 및 3$0^{\circ}C$)와 PEG용액(O, 20, 30 및 35g / 100g $H_2O$) 농도를 달리여 대두품종(방사콩, Hill 콩, 팔달콩, 두엽콩, 백운콩, 광교, 장엽콩 및 황금콩)의 발아와 묘신장 반응을 측정하였다. PEG 용액 농도의 조절은 상온에서 0.0, -0.5, -1.1 및 -1.5 MPa 수분포텐셜을 기초로 하였다. 시료의 채취는 15$^{\circ}C$에서 3, 6, 9 및 12일 간격으로, 3$0^{\circ}C$에서는 1, 2, 3 및 4일간격으로 실시하였다. 품종당 15립의 종자를 plastic petridish 안의 Whatman No.1(9cm) 여지위에 자동 주사기로 0.2% 0.2% Thiram을 첨가한 농도별로 PEG용액을 15ml 씩 조절하였다. Plastic petri-야노를 Cap으로 대하여 15$^{\circ}C$ 및 3$0^{\circ}C$ 항온의 무광조건하에서 발아시켰다. 8개 품종의 묘수분함량과 묘장이 15$^{\circ}C$ 및 3$0^{\circ}C$에서 공히 PEG용액 농도가 증가할수록 감소되었다. 묘수분함량과 묘장의 품종간차이가 두 온도에서 공히 발견되었다. 대립중이 소립중보다 많은 양의 수분을 흡수하였으나 수분함량(%)은 소립중이 높았다. Hill 콩과 팔달콩은 두 온도에서 공히 PEG 용액농도 20에서 30g/100g $H_2O$까지 타품종들에 비교하여 큰 묘장을 보였다. 본 시험의 연구결과에서 PEG용액 농도에 대한 대두발아반응 시험으로 조기시 출현 증진을 위한 대두품종 선발 가능성이 있음을 보였다.

  • PDF

실내수조를 이용한 무지개송어의 사육실험 (HEARING OF RAINBOW TROUT TO COMMERCIAL SIZE IN A INDOOR AQUARIUM)

  • 김인배;조재윤
    • 한국수산과학회지
    • /
    • 제11권4호
    • /
    • pp.233-238
    • /
    • 1978
  • 1977년 11월 11일 부터 1978년 6월 12일까지 부산수산대학 연구실의 실험수조내에서 사육실험한 무지 개송어의 성장결과를 요약하면 다음과 같다. 1. 사육수조는 $1m\times1m\times0.67m(D)$ 스테인레스 수조에 수심 40m(수양 $400\iota$로 유지하고, 수조의 바닥가운데는 직경 20cm, 깊이 20cm의 역원추형의 침전배수부가 있어서, 연속주수되는 량만큼의 물이 수조내의 오물과 함께 수조밖의 스탠드파이프를 통하여 밖으로 배수되었다. 주수는 1분당 $3\iota$, 매일 약 16기간 계속하였다(24시간기준 1분당 $2\iota$). 수조내에 설치된 간역여과제치는는 크기 $23cm\times23cm\times40cm(D)$의 플라스틱통에 깊이 약 30cm 되도록 자갈을 넣었고, 여과순환수량은 1시간당 평균 $1,030\iota$였다. 따라서, 회전율은 1시간당 약 2.6회 된다. 2. 제1기인 처음 77 시간에 평균 88.3g부터 229g 으로 자랐고, 총 중량은 30.7g으로 되었다. 이 때의 사료계수는 1.249, 일간평균성장율은 $1.245\%$, 일간평균성장율은 243.4g였다. 그 동안의 폐사는 작은 것 2미, 53g였다. 제2기인 135 일간에는 평균229g으로부터 555g으로 자랐고, 생존한 것은 103미 57.2kg 였다. 그동안 사고, 병사, 기타 이유로 덜어낸 것이 31미, 11,255g 였다. 이 기간중의 사료계수는 1.447, 일간평균 성장률 $0.658\%$, 일간성장량은 평균 279.8g 였다. 전기간을 통한 212일간의 결과를 종합하면 성장률 6.28배, 일간평균 성장율 $0.871\%$, 일간평균성장량은 266.5g, 사료게수 1.381을 나타난다. 3. 먹이는 국내에서 자급할 수 있는 어체, 번데기를 주원료로하여 연구실에서 제조하여 사용하고 그 결과는 외국의 고단백질상품사료에 의한 사육결과에 못지 않는 성장률과 사료효율을 나타냈다. 4. 이번 결과를 그대로 적용하여 5,000kg의 생산시설을 만들면, 소요되는 지하수량은 1시간 약 $10.8m^3$, 212일간 사육한다고 보면 약 530만원의 경비로 970만원의 이익이 나오는 계산이 되므로, 어느 정도의 지하수가 확보된다면 기업적으로도 충분히 성립된다고 생각된다.

  • PDF