• The Korean Journal of Food And Nutrition
• /
• v.17 no.3
• /
• pp.254-259
• /
• 2004

Rapid detection of foodbome pathogens is becoming increasingly important. The requirement for faster, more reliable tests has lead to the development of a wide range of rapid methods. Among these methods, the use of systems based on nucleic acid based detection has been increasing since they offer advantages of reduction in test time and more reliable detection or identification. Random Amplification Polymorphic DNA(RAPD) method has been used to fingerprint foodbome microorganisms; Listeria monocytogenes. In this study, 10-mer primer OPG-13(5'-CTCTCCGCCA-3') was used to generate RAPD-PCR for detection of pathogenic L. monocytogenes of Listeria spp. Among 20 primers tested, OPG-13 showed on acceptable result for the differentiation of a pathogenic Listeria from non-pathogenic microorganisms. Pathogenic Listeria, L. monocytogenes(ATCC 15313, 19111, 19112, 19113) showed two bands for 700 bp and 1,500 bp while non-pathogenic bacteria, L. ivanovii, L. grayi, L. murrayi, L. innocua, L. welshimeri, and L. seeligeri had only one band sizing from 2,000 to 2,300 bp. This RAPD method proved to be a valuable to gain important information on sources of pathogenic bacteria in food industry.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.7
• /
• pp.738-746
• /
• 2016

As the trend of future war has been changed to network centric warfare, tactical data link should be needed for fast and accurate situation awareness. Nowadays, Korean air force conducts military operations by using aircrafts equipped with Link-16. The Link-16 can conduct multiple mission at the same time because it supports multi-net capability. Due to lack of frequency resource, the way to share the frequency with other systems has been studied and using L band with radar is considered as one of the candidates bands. However, the data link can be affected by the interference from radars when it shares the L-band because the L-band in Korea is already assigned to long-range detection radars. In this paper, we evaluate operational possibilities of tactical data link in the L-band based on Link-16.

• Journal of Positioning, Navigation, and Timing
• /
• v.4 no.4
• /
• pp.151-160
• /
• 2015

GPS L2C signal is a recently added civil signal to L2 frequency and is constructed by time division multiplexing of civil moderate (L2-CM) and civil long (L2-CL) code signals. While the L2-CM code is 20 ms-periodic and modulates satellite navigation message, the L2-CL code is 1.5s-periodic with 767,250 chips long code sequence and carries no data. Therefore, the L2-CL code signal allows receivers to perform a very long coherent integration. However, due to the length of the L2-CL code, the acquisition of the L2-CL code signal may take too long or require too much hardware resources. In this paper, we propose a three-step ultra-fast L2-CL code acquisition (TSCLA) technique for dual band GPS receivers. In the proposed TSCLA technique, a dual band GPS receiver sequentially acquires the coarse/acquisition (C/A) code signal at L1 frequency, the L2-CM code signal, and the L2-CL code signal to minimize mean acquisition time (MAT). The theoretical performance analysis and numerous Monte Carlo simulations show the significant advantage of the proposed TSCLA technique over conventional techniques introduced in the literature.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2007.04a
• /
• pp.440-443
• /
• 2007

In this paper, microstrip antenna is designed for industrial-scientific-medical(ISM)band of S-Band. We proposed that radiation element of antenna, which is rectangle patch shape. The feeding structure used L-shaped structure. Center frequency and -l0dB bandwidth are investigated by change of length and width in patch plane. And maximum gain, front to back ratio and 3dB beam width is presented by simulation radiation pattern of antenna in frequency ISM Band. The center frequency is 2.45GHz, band width is $2.314{\sim}2.577GHz$ with 263MHz(11%). And the antenna maximum gain is 9.3dBi, 3dB beam width E-plane is $52.5^{\circ}$, H-plane is $64.7^{\circ}$.

• Information and Communications Magazine
• /
• v.12 no.6
• /
• pp.65-73
• /
• 1995

위성통신용 궤도와 주파수 자원은 매우 한정적이며 최근에 정지궤도 위성과 저궤도 위성을 이용한 다양하나 형태의 서비스에 대한 수요가 급증하고 있으므로 한정된 주파수 자원에 대한 효율적인 활용기술과 새로운 주파수자원 및 서비스 개발이 필요하다. 북미, 유럽, 일본은 1970년도 중반기부터 C-band를 이용하는 위성통신의 연구를 시작으로, 최근에는 L-band, Ku-band, Ka-band를 이용하는 위성통신에서 효율적으로 전력 및 주파수를 활용하는 방안에 대한 연구를 활발하게 진행하고 있다. 국내는 1980년도 하반기부터 Ku-band를 이용하는 위성통신에 대한 연구가 시작되었으나 아직도 장기적이고 구체적인 연구개발 계획이 미비한 상황이며 Ka-band 정지궤도와 L-band 저궤도 위성통신 기술의 연구개발은 아직 초보적인 단계이다. 따라서 본 논문에서는 위성통신용 주파수의 국제적인 이용현황과 추세를 분석하여 향후 국내에서 정지궤도 및 저궤도 위성의 궤도와 주파수 확보 및 활용에 참고가 되도록 한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.9
• /
• pp.900-907
• /
• 2013

The development processes of a L-band microwave radiometer for remote sensing of water surface salinity are described in this paper. Achieving the development aim of the measurement accuracy within 2 psu for water surface salinity of 0~40 psu, the requirements and specifications of the microwave radiometer and its receiver are drawn. The receiver with high gain, high sensitivity is designed and implemented to satisfy these requirements and specifications. The receiver has the bandwidth of 45 MHz, the system gain of 47 dB and the sensitivity of 0.41 K at 1,390 MHz. The effectiveness of the developed L-band microwave radiometer for remote sensing of water surface salinity is demonstrated experimentally. The results show the microwave radiometer can detect water surface salinity for 10~28 psu within the accuracy of 1.4 psu.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.6
• /
• pp.740-747
• /
• 2019

In this paper, an antenna applicable to WLAN and WiMAX frequency bands is designed, fabricated, and measured. The proposed antenna is designed to have two branch strip line in the patch plane and a rectangular slit in the ground plane based on microstrip feeding for triple band characteristics and added a vertical strip in the ground plane to enhance impedance bandwidth characteristics. The proposed antenna is designed on a substrate with a relative permittivity of 4.4, a thickness of 1.0 mm, and has a size of $18.0mm(W1){\times}37.3mm$ (L4+L5+L7). From the fabricated and measured results, impedance bandwidths of 480 MHz (2.32 to 2.80 GHz) for 2.4/2.5 GHz band, 810 MHz (3.22 to 4.03 GHz) for 3.5 GHz band, and 1,820 MHz (5.05 to 6.87 GHz) for 5.0 GHz band were obtained based on the impedance bandwidth. Measured 3D pattern and gains are displayed.

• Journal of Photoscience
• /
• v.11 no.3
• /
• pp.107-113
• /
• 2004

Synthesis, absorption and fluorescence properties of 3-methyl indole (1), N-(benzenesulfonyl)-3-(3-oxo-but-1-enyl)-indole (2) and 1H-3-(3-oxo-but-1-enyl)-indole (3) are described. Extended conjugation at C-3 of indole as in 3 causes moderate resolution of $^1L_a$ and $^1L_b$ bands. However, 2 having an electron-withdrawing group at indolic nitrogen shows only the $^1L_a$ band. While the $^1L_b$ band largely remains solvent polarity independent, the $^1L_a$ band undergoes moderate red shift in polar solvents. The fluorescence in 2 and 3 originates from the $L_b$ transition. Additionally, interaction of 2 and 3 with BSA indicates that these compounds bind to the hydrophobic site of BSA with the formation of a highly fluorescent BSA-probe complex.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.5
• /
• pp.1071-1077
• /
• 2010

The six-port phase correlator using lumped elements was designed and fabricated in this paper, also the receiving performance of L-band direct conversion receiver using lumped six-port phase correlator element was analyzed. The proposed L-band lumped six-port phase correlator element was composed of a resistive power divider and the twist-wire coaxial cables. The proposed lumped six-port structure provides the small-sized configuration and wide-band characteristics. The performance of the L-band lumped direct conversion receiver structure was measured under the conditions of 1.69 GHz frequency for LO-CW signal and RF-QPSK signal, which are input signals for the lumped six-port phase correlator element. The direct conversion receiving structure using the proposed lumped six-port phase correlator element can recovered the good digital I/Q signal.

• Korean Journal of Remote Sensing
• /
• v.34 no.2_1
• /
• pp.283-293
• /
• 2018

We applied PSInSAR to two SAR satellite (ALOS-1 and COSMO-SkyMed) images and analyzed the difference in displacement observation performance according to sensor characteristics. The building layer was extracted from the digital topographic map, and the PS extracted from the SAR image was classified into two groups(building structure and ground surface) for density analysis. The density of PS extracted from the research area was $0.023point/m^2$ for ALOS-1 PALSAR and $0.1point/m^2$ for COSMO-SkyMed, more than 4 times PS was extracted compared to ALOS-1. In addition, not only the PS density in the building, but also the density in the ground were greatly increased. The average displacement velocity of ALOS-1 PALSAR is within ${\pm}1cm/yr$, while for COSMO-SkyMed it is within ${\pm}0.3cm/yr$. Although it is difficult to make quantitative comparisons because it does not use the data for the same period, it can be said that the accuracy of X-band SAR system is very high compared to the L-band. In consideration of PS observation density and observation accuracy of displacement, X-band SAR data is very effective in research where it is important to acquire useful signals from the ground surface, such as ground subsidence and sinkhole.