• Economic and Environmental Geology
• /
• v.19 no.1
• /
• pp.25-33
• /
• 1986

The geology of the Jeju island is characterized by the occurrence of thick voluminous basaltic lava flows and minor trachytic lavas. The land form can be divided topographically into the lava plateau, the shield-shaped Halla volcanic edifice and the parasitic cones whose number is more than 360, which is closely related to the cyclic volcanism of the island. Especially, the trachytic lavas seem to be the latest differentiation products of the cyclic activities and largely classified into two groups (Backlokdam group and Sanbangsan group) on the basis of the occurrence and the petrography. The paleomagnetism and the radiometric age on the two groups of trachyte suggest a lower and an upper time limits of the volcanic stratigraphy of the island. An average age of the trachyte of the Sanbangsan group is $0.733{\pm}0.056m.y.$, and is correlated to a horizon a little lower than the boundary (0.69m.y.) between the Brunches normal epoch and Matuyama reversed epoch. An average age of $0.025{\pm}0.008m.y.$ determined from the Backlokdam trachyte may be corrected to anyone horizon of the Laschamp, or the Lake Biwa, or the Lake Mono excursion. The two groups of trachytes are distributed with the latitude difference of 9'($0.15^{\circ}$), and with age difference of about 0.71 m.y. Assuming that the two trachyte groups were erupted from the same stationary hot spot, the lithosphere comprising the Jeju island is considered to have moved southward with a rate of about 2.3 cm/year.

• Applied Biological Chemistry
• /
• v.18 no.2
• /
• pp.102-108
• /
• 1975

Acorn starch preparation and some of its characteric study were made. The results obtained were as follows. 1) Yearly production of acorn in Korea is amounted to be 1,200,000 l approximately. The content of its carbohydrate was found to be 72.8%, so that this would be considered as one of good resources of starch in our country. 2) The major moieties of tannin constituents of acorn were found to be the gallic acid, catechin and chlorogenic acid. 3) The type of acorn starch granules were short oval shaped having the diameters of that were in the range of $3.5{\sim}5.2{\mu}$ and $8.0{\sim}19.5{\mu}$, respectively. 4) Initial gelatinifalion teniperaiure of acorn starch was $62{\sim}64^{\circ}C$, similar to those of corn and wheat starch. 5) Alnylose content of acorn starch were 27.1%, which is lower than that of barley but higher than that of potato starch. 6) The raising power of the acorn starch was 12.4, which is higher than that of the potato starch but lower than those of common cereal starches. 7) The blue value of acorn starch was 0.43, similar to that of wheat starch and higher than those of wheat potato and rice starch but lower than that of barley starch. 8) The alkali number of the acorn starch was 11.03, similar to that of corn starch but higher than those of barley and rice starch.

• Korean Chemical Engineering Research
• /
• v.46 no.5
• /
• pp.880-885
• /
• 2008

Spray pyrolysis was applied to prepare spherical silica particles with mesopores of a regular structure. The physical properties such as surface area, pore size, pore structure, particle size, and morphology were studied by BET, SEM, SAXS, and DLS analysis. At a fixed gas flow rate, the BET surface area changed from 200 to $1,290m^2/g$ as changing the CTAB/TEOS molar ratio from 0.05 to 0.3. At a fixed CTAB/TEOS ratio, the surface area of silica particles was varied from 1,062 to $1,305m^2/g$ with changing the gas flow rate from 10 to 40 l/min. The average pore size measured by BJH desorption was about $21{\sim}23{\AA}$ and not significantly influenced by the CTAB/TEOS ratio and the gas flow rate. Finally, the highest surface area which was $1,305m^2/g$ were obtained when the CTAB/TEOS ratio and the gas flow rate were 0.2 and 20 l/min, respectively. According to SAXS analysis, the prepared silica particles showed a strong peak at $2{\theta}=2.6^{\circ}$ and two minor peaks around $2{\theta}=4.4^{\circ}$ and $5.1^{\circ}$, which are due to regular mesopores of hexagonal structure. The morphology of silica particles prepared were spherical shape and the average particle size was $1.0{\mu}m$.

• Parasites, Hosts and Diseases
• /
• v.54 no.5
• /
• pp.667-671
• /
• 2016

Myiasis is a relatively common infection of animals kept as pets, although only 1 case of canine myiasis has been described so far in the Republic of Korea. In the present study, we report an additional case of canine wound myiasis with identification of its causative agent, Lucilia sericata. An 8-year-old male Siberian husky dog was referred with anorexia, vomiting, and diarrhea to the Chungbuk National University Veterinary Medical Center, Cheongju-si (city), Chungcheongbuk-do (province), Korea in July 2013. Physical examination indicated the patient had a deep wound filled with a maggot swarm as a left gluteal lesion. A total of 216 maggots were removed by forceps, and the wounded area was sponged with gauzes and disinfected with 70% alcohol and a povidone-iodine solution. After daily care and suturing the wound, the patient was discharged at day 19 after admission. Recovered worms possessed morphological characteristics similar to those of L. sericata, namely, a sub-cylindrical body with 6-8 lobed anterior spiracles, round shaped with a button surrounded by a peritremal ring with no gaps, and similar distances between dorsal, median, and outer papillae of the 12th segment. Additionally, cox1 partial sequences (528 bp) obtained in the present study showed 100% identity with those of L. sericata (GenBank no. KT272854.1). L. sericata is indicated as a pathogen of myiasis infection not only in humans, but also in animals kept as pets in Korea.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.1
• /
• pp.168-174
• /
• 2022

In a wave power generation system, the overtopping system is known as an overtopping wave energy converter (OWEC). The performance of an OWEC is affected by wave characteristics such as height and period because its power generation system is sensitive to those characteristics; these, as well as wave direction, depend on the sea. As these characteristics vary, it is hard for the OWEC to produce power in a stable manner. Therefore, it is necessary to find an appropriate shape for an OWEC, according to the characteristics of the sea it is in. This research verified the effect of the design of the OWEC ramp on the hydraulic efficiency using the smoothed particle hydrodynamics (SPH) particle method. A total of 10 models were designed and used in simulations performed by selecting the design parameters of the ramp and changing the attack angle based on those parameters. The hydraulic efficiency was calculated based on the rate of discharged water obtained from the analysis result. The effect of each variable on the overtopping performance according to the shape of the ramp was then confirmed. In this study, we present suggestions for determining the direction for an appropriately shaped OWEC ramp, based on a specific sea area.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.6A
• /
• pp.625-639
• /
• 2009

Experimental and analytical studies are performed on the mechanical behavior of concrete-filled tubular(CFT) truss girders for different f/L ratios. Bending tests are conducted on two CFT truss girder specimens to determine fundamental structural characteristics such as the strength and deformation properties. Nonlinear material models for CFT members subjected to an axial compressive force are compared in this paper by using the nonlinear finite element program, ABAQUS. Previous researchers have proposed several nonlinear stress-strain models of confined concrete. In this study, the nonlinear analyses are performed applying several stress-strain models for confined concrete proposed by Mander, Sakino, Han, Susantha and Ellobody, and the results are compared with the experimental results in terms of load-deflection and load-strain relationships. Based on the comparisons of the load-deflection relationships, the models proposed by Mander and Susantha provide a maximum load about 12.0~13.8% higher and that by Sakino gives a maximum load about 7.6% higher than the experimental results. The models proposed by Han and Ellobody give a maximum load only about 0.2~1.2% higher than the test results, showing the best agreement among the proposed stress-strain models. However, the load-strain relations predicted by the existing models generally provide conservative results exhibiting larger strains than the experimental data.

• Journal of Aquaculture
• /
• v.15 no.2
• /
• pp.95-101
• /
• 2002

During the periods from lily to October, 2000 in Hongseong and lucy to October, 2001 in Taean in the west coast of Korea, the following environmental conditions prevailed : water temperature : 22.0~26.817, salinity 27.23 ~30.80%, dissolved oxygen 4.12 ~6.26 ml/l, pH 7.89 ~8.09, phosphate 0.39 ~0.65 $\mu m$ , inorganic nitrogen 5.05~9.26 $\mu m$, suspended solid 5.4~20.8 mg/l and chemical oxygen demand 1.12~1.87 mg/l. The B-shaped veliger larvae of the Ark shell occurred in maximum number at $25^{\circ}C$ prevailing from mid-August at Hongseong and Taean. Full grown larvae reached maximum abundance from late August. To identify the effectiveness of the substratum for spat collection, raschel net were tested to Larval settlement. The most effective depth to collect the larvae in natural environment was the collectors suspended at 7~8 m depth. At these depths, about 49 to 94 spats were found on the collector (40$\times$50 cm), The growth of shell height (Y) to shell length (X), and total weight (W) to shell length (L) could be formulated as follows respectively: Hongseong: SH = 0.7168 SL -0.6466 ( $r^2$ = 0.9839), TW = $0.0001SL^{3.1705}$ ($r^2$ = 0.9882) Taean: SH = 0.736 SL -0.8824 ($r^2$ : 0.9899), TW : 0.00005 $SL^{3.3731}$ ($r^2$ : 0.9899)

• The Korean Journal of Mycology
• /
• v.32 no.2
• /
• pp.79-88
• /
• 2004

Cordyceps pruinosa grows upon dead pupae of Lepidoptera and produces one or $3{\sim}4$ club-shaped stromata per host. The stromata have distinct club-shaped head and long stalk. The length of stromata varies from $1{\sim}3\;cm$. Apical head consists of densely crowded semi-immersed perithecia, which are $360{\sim}400\;{\times}\;180{\sim}200\;{\mu}m$ in size. Asci are $150\;{\mu}m$ in length and $2.8{\sim}3\;{\mu}m$ in diameter. Ascospores, which are $124{\sim}141\;{\mu}m$ in length, have thin thread-like structures in the middle with part-spores attached on both sides. Each ascospore does not separate into part-spores after dispersal, but each part-spore germinates and together develops a colony. The imperfect form produces phialides of $15{\sim}24\;{\times}\;2{\sim}3\;{\mu}m$ size, with spherical or spindle shaped conidia of $4{\sim}6\;{\times}\;1.8{\sim}2.4\;{\mu}m$ size, The anamorph was identified as Mariannaea elegans Samson. YMA and SDAY agar media with pH 7 was produced abundant mycelial growth with high density. Best mycelial growth was observed when dextrin was used as a carbon source. Lactose, saccharose and sucrose also produced high mycelial growth. Peptone, yeast extract and tryptone produced abundant mycelial growth, when used as nitrogen sources. Highest mycelial growth and density was observed when C/N ratio was 1 : 1 at the concentration of 12.5 g/l each. $KH_2PO_4$ was the best mineral source for mycelial growth. Highest mycelial dry wt. was produced in YM and SDAY broths. Optimum inoculum for 100 ml of liquid broth was 6 mycelial discs. Similarly, optimum liquid culture period was 7 days.

• Journal of Plant Biotechnology
• /
• v.41 no.1
• /
• pp.56-63
• /
• 2014

Using commercial radish varieties for processing, about 30% of radish was discarded due to the root shape and low purity. To raise the processing ability, we tried to develop a new variety producing H-shaped root. As another characteristic required in variety for processing is high purity, we tried to raise purity using simple sequence repeats (SSR) markers for testing seed purity in every segregating generation. To develop Male-sterile (MS) seeding parent, we crossed commercial variety of 'Gwan dong spring' and 'Gyeo ryong spring'. One elite inbred was selected as recurrent parent for the MS plant. The major horticultural traits of selected inbred line were disease resistance, late bolting, heat resistance and bright green root top color. To develop pollen parent, we crossed commercial variety of 'Tae sang king' and 'Seoul spring'. We used individual selection method to develop H-shaped hard root and disease resistant inbred. In each segregating generation, we selected one plant based on phenotype and the uniformity of selected plant was tested by SSR markers using self-pollinated seeds. In the first segregating generation, 64.6% of sib plants shared the same band in PCR amplification using ACMP-490 primer and 66.7% using cnu-316 primer. The uniformity of segregating generations using ACMP-490 and cnu-316 raised in second generation to 68.8%, 70.8%, respectively; in third generation to 93.8%, 100%; in fourth generation to 93.8%, 100%; in fifth generation to 95.8%, 100%; in sixth generation to 100%, 100%. A novel cross was made using selected MS parent and pollen parent. When we checker the horticultural traits using autumn cultivation, the novel cross variety produced H-shaped root comparing other commercial varieties and produced highly uniform radish. Thus we registered this novel cross variety as 'YR ORE' at 2013 (Registration No. 4550).

• Journal of Korean Neurosurgical Society
• /
• v.29 no.10
• /
• pp.1309-1315
• /
• 2000

Objectives : We performed an in vivo experiment to investigate the effect of $^{166}Holmium$ and $^{166}Holmium$-chitosan complex($^{166}Ho$-CHICO) on the normal brain of rats and to determine the sublethal dose of $^{166}Ho$-CHICO. Materials and Methods : $^{166}Ho$ is a beta and gamma ray emitter. $^{166}Ho$-CHICO is a novel radio-pharmaceutical complex with chitosan to facilitate the transport of $^{166}Ho$ obtained from Korea Atomic Energy Research Center(Taejon, Korea). It is in acidic form and becomes gel state at alkaline pH. One hundred and seventy consecutive rats were divided into four groups : $^{166}Ho$ treated(n＝50), $^{166}Ho$-CHICO treated(n＝57), saline treated(n＝5) and chitosan treated(n＝5) groups. $^{166}Ho$ and $^{166}Ho$-CHICO were injected into the rat brain stereotactically with various doses of 0.1mCi/$20{\mu}l$, 0.2mCi/$20{\mu}l$, 0.3mCi/$20{\mu}l$, and 0.4mCi/$20{\mu}l$ using an automated microinjector. Nuclear imaging, histopathological and hematological studies were performed in 10 rats in each group at 1 day, 3days, 7 days, 1 month and 3 months after the injections. Results : An infiltration of inflammatory cells and necrotic changes were noted in $^{166}Ho$ treated group at 1 week after the injection. A wedge-shaped tissue defect due to necrosis, lined with infiltrated glial cells in $^{166}Ho$ treated group and a cystic defect lined with reactive astroglial cells in $^{166}Holmium$-CHICO treated group at 3 months after the injection were observed. $^{166}Ho$ alone without chitosan leaked out and caused necrotic lesion on the cerebral surface but $^{166}Holmium$-CHICO treated group did not show this feature. As the dose of $^{166}Ho$ increased, the mortality rates were also increased. The mortality rate of the $^{166}Holmium$-CHICO group was higher than the $^{166}Ho$ treated group at a dose of 0.4mCi/$20{\mu}l$/300g. There was no detectable radioactivity due to the leakage or extravasation from the injected site of the brain on the scintigraphy performed at 1 hour, 24 hours and 48 hours after the injection. There was also no detectable activity of $^{166}Holmium$-CHICO in other organs including spleen, liver and kidney. Conclusions : $^{166}Ho$-CHICO did not leak out to the critical cortical surface of the brain from the injection site and induced radiation changes of the parenchyma around the injection site without cortical damage. The sublethal dose of $^{166}Ho$-CHICO for the normal brain in rats was determined to be 0.2mCi/$20{\mu}l$/300g.