• 제목/요약/키워드: L-S theory

검색결과 408건 처리시간 0.024초

소설과 영화 『희망 L'Espoir』의 서사담론 (The Narrative Discourse of the Novel and the Film L'Espoir)

  • 오세정
    • 비교문화연구
    • /
    • 제48권
    • /
    • pp.289-323
    • /
    • 2017
  • 앙드레 말로의 소설 "희망 L'Espoir"은 스페인 내란전쟁에 직접 참전한 경험을 바탕으로 이 사건의 전말을 논픽션으로 제시하는 르포타주문학의 특성을 보유하며, 영화 "희망 L'Espoir"은 이 소설을 각색하여 르포타주문학에 상응하는 세미다큐멘터리로 제작된다. 세미다큐멘터리 영화는 사회적 현상이나 사건에 대한 리얼리티를 추구하는 영화장르이다. 이처럼 소설과 영화 "희망 L'Espoir"은 각각 서로 다른 장르임에도 불구하고 창작활동이 밀접한 관련성을 맺고 있으며 서사적 연계성도 상당하다. 그러므로 소설과 영화 "희망 L'Espoir"에 대하여 주네트의 서사이론에 의거한 서사담론의 숙고는 연구의 당위성을 보유한다. 모든 종류의 이야기는 서사물 속에서 스토리시간과 담화시간이 서로 다른 이중적 시간을 보유한다. 왜냐하면 서사물 속에서 하나의 사건은 다른 것들보다 먼저 제시되거나 나중에 나타낼 수도 있고, 사건을 길게 혹은 짧게 이야기 할 수 있으며, 사건을 한 번 또는 여러 번 되풀이해 환기시킬 수 있기 때문이다. 이처럼 사건이 발생하는 시간과 이 사건을 기록하는 시간이 서로 다른 두 개의 시간성을 분석한 것이 순서, 지속, 빈도이다. 이러한 순서, 지속, 빈도의 시간성은 이야기의 흐름을 조절하는 극적 템포를 의미하기 때문에 편집적인 개념으로써 소설과 영화 "희망 L'Espoir"에서 나타나고 있다. 그것은 이야기를 배열하고 요약하며, 삭제하는 시간의 대응으로 호기심과 충격을 야기하는 미학적 담론이다. 또한 화법과 서술태는 텍스트에서 화자 또는 서술자의 위치와 시점의 문제를 명확하게 구분하기 위해 주네트가 제기한 개념이다. '누가 이야기하느냐'와 '누가 보느냐'하는 문제를 구분하는 것은 텍스트의 서술자와 텍스트의 시점이 동일하지 않기 때문이다. '누가 이야기하느냐'의 문제는 누가 이야기의 서술을 담당하고 있는가를 말한다. 그러나 '누가 보느냐'하는 문제는 이야기에서 누구의 시각에 의해 서술되고 있는 것인가의 문제와 관련된다. 소설 "희망 L'Espoir"에서는 제로초점과 내적 초점화를 통한 시점의 변화가 등장하며, 이것은 영화 "희망 L'Espoir"에서 다중촬영이 연계되고 있다. 또한 이야기의 메타적 서술로서 이야기의 액자구조가 소설과 영화 "희망 L'Espoir"에서 모두 서술태의 형태로 동일하게 재현된다. 그러므로 소설과 영화 "희망 L'Espoir"에서 서사담론의 의미는 텍스트와 화자, 수용자 사이에 이야기를 소통하는 양상이다.

고문서 정리(整理)에 대한 기록학적 연구 - 새로운 고문서 정리 방법의 모색을 위하여 - (An Archival Study on the Arrangement and Description of Old Document(Diploma))

  • 조경구
    • 기록학연구
    • /
    • 제7호
    • /
    • pp.37-74
    • /
    • 2003
  • An Old document(Diploma) is a historical and unique record, so it must be collected, arranged, and preserved for research as soon as possible. Especially, for the effective use of the Old Document(Diploma), it is needed to arrange and describe the material systematically on the ground of modern archival theory. The Kyujanggak Archives in the Seoul National University has published 23 volumes of Old document(Diploma) material Old Document(Diploma). But they seem to cause the readers inconvenience, because the materials are classified and gathered only by genre, the titles or the orders of the materials are not standardized, and there is no description about the content of each Old document(Diploma). Jangseo-gak Library in The Academy of Korean Studies has also published the series of Old document(Diploma) material Old Document(Diploma) Collection. However the case is not different, since they are all mixed up with materials classified and gathered by genre, family, academy, or local school. And a great part of the materials have no titles and no description about the content of each Old document(Diploma), either. About the arrangement and description of the records, European and American archival science has established the theory of l)the principle of provenance, 2)the principle of original order, 3)levels of control, 4)collective description. These theories are valuable for the effective use of Old document(Diploma). On the viewpoint of the principle of provenance, Old document(Diploma) materials should not be classified by subject and genre, but by family and person. Then, the Old document(Diploma) materials, after collected by the unit of family or person on the viewpoint of the principle of provenance, should be arranged in their original order for more detailed arrangement and furthermore, for the work to find their relationship. This is so called the principle of original order. The hierarchical management of the Old document(Diploma) materials, for example, classifying by record group, sub-group, series, item and so on, is the concept of the levels of control, and comprehensive description of the each hierarchical structure is the concept of the collective description. Let's apply these archival theories to 34 pieces of the Chung, Man-Seok's material in the series of Old document(Diploma) material Old Document(Diploma). First, collect the Old document(Diploma) materials into Chung, Man-Seok's collection(the principle of provenance), which were scattered in the series classified by genre. Secondly, rearrange them chronologically(the principle of original order), and then we can find the comprehensive information about Chung, Man-Seok. For the hierarchical management of the Old document(Diploma) materials, we should establish a few concepts from the general, large group to specific, small item. The concepts can be organized as following; l)record group(Chung, Man-Seok record group) - 2)sub-group(personnel document, property document, family document, social activity document, political activity document, etc) - 3)series(gyoji-series, gyoseo-series, yuji-series etc. in the personnel document) - 4)folder(document with additions) - 5)item(one document). According to the the theory of the collective description, in the level of record group, there should be a collective description of Chung, Man-Seok's biography or a summary of record group. Similarly, there should be a collective description of a summary of sub-group in the level of sub-group and a summary of series in the level of series.

변두께를 갖는 두꺼운 환형판의 삼차원적 리츠방법에 의한 진동수와 모드형상 (Frequencies and Mode Shapes of Annular Plates tilth Variable Thickness by the Ritz Method in Three-Dimensional Analysis)

  • 양근혁;강재훈
    • 한국소음진동공학회논문집
    • /
    • 제11권5호
    • /
    • pp.89-100
    • /
    • 2001
  • The Ritz method Is applied In a three-dimensional (3-D) analysis to obtain accurate frequencies for thick. linearly tapered. annular plates. The method is formulated for annular plates haying any combination of free or fixed boundaries at both Inner and outer edges. Admissible functions for the three displacement components are chosen as trigonometric functions in the circumferential co-ordinate. and a1gebraic polynomials in the radial and thickness co-ordinates. Upper bound convergence of the non-dimensional frequencies to the exact values within at least four significant figures is demonstrated. Comparisons of results for annular plates with linearly varying thickness are made with ones obtained by others using 2-D classical thin place theory. Extensive and accurate ( four significant figures ) frequencies are presented 7or completely free. thick, linearly tapered annular plates haying ratios of average place thickness to difference between outer radius (a) and inner radius (b) radios (h$_{m}$/L) of 0.1 and 0.2 for b/L=0.2 and 0.5. All 3-D modes are included in the analyses : e.g., flexural, thickness-shear. In-plane stretching, and torsional. Because frequency data liven is exact 7o a\ulcorner least four digits. It is benchmark data against which the results from other methods (e.g.. 2-D 7hick plate theory, finite element methods. finite difference methods) and may be compared. Throughout this work, Poisson\`s ratio $\upsilon$ is fixed at 0.3 for numerical calculations.s.

  • PDF

수평축 조류발전용 로터 블레이드 형상설계 및 CFD에 의한 출력성능해석 (Rotor-Blade Shape Design and Power-Performance Analysis for Horizontal-Axis Tidal Turbine Using CFD)

  • 정지현;김범석
    • 대한기계학회논문집B
    • /
    • 제39권8호
    • /
    • pp.661-668
    • /
    • 2015
  • 본 연구에서는 풍력발전분야의 블레이드 공력설계 및 성능해석에 적용되고 있는 날개요소운동량이론을 이용한 조류터빈 블레이드 형상설계 방법론을 제시하였으며, S814 단일 에어포일로 구성된 2 블레이드 형식의 1MW급 수평축 블레이드 형상설계 결과를 제시하였다. 조류터빈 블레이드는 해양환경에서 운전되는 특성 상 블레이드 팁 근방에서 캐비테이션 발생으로 인한 문제가 상존하므로, 설계초기단계에서 신중히 고려되어야 한다. 본 연구를 통해 설계된 1MW 조류터빈 블레이드의 유동특성분석 및 출력성능해석을 위해 캐비테이션 모델이 고려된 CFD 해석을 수행하였으며, 블레이드 팁 근방 흡입 면 및 압력 면에서 캐비테이션이 발생하고 있음을 확인하였다. 최대 출력계수는 설계 주속비 7의 조건에서 47%로 나타났다.

주어-조동사 도치에 관한 소고 (On Subject auxiliary inversion in English)

  • 서진희
    • 영어어문교육
    • /
    • 제6호
    • /
    • pp.143-157
    • /
    • 2000
  • It has been one of the puzzles in the English syntax that so called the rule of subject-auxiliary inversion (SAI) is not allowed in subject wh-movement while it is not obligatory in non-subject wh-movement in a root sentence. This asymmetry has been a puzzle since SAI itself was thought to be a part of question construction as we can observe from yes/no questions. The asymmetry gets more complicated in terms of sentence embedding, i.e no SAI is permitted in the embedded context in question. The goal of this paper is to suggest an unified analysis for this unsolved grammatical phenomena on the basis of Rizzi (1997)'s recent work. The main idea is that SAI is not a I-to-C movement but one of I-to-Focus where Focus is a functional category and its phrase is located between CP and IP. The other proposal is that Wh-movement is no more homogeneous in terms of landing site between a root and an embedded sentence: the target for a wh-phrase in the former is the Spec of FocP (Focus Phrase) but the one in the latter is the Spec of CP as the standard theory assumes. Pesetsky (l999)'s analysis is discussed and its theoretical and empirical shortages are pointed out. Its rather radical proposals such as the one that the nominative case is just an uninterpretable tense feature of DP and the other that 'that' is no longer a complementizer but an element of I(nflection) make it less acceptable in spite of the possibility that it can get rid of Case theory entirely, which would be ideal in the spirit of minimalism.

  • PDF

익스플리시트 유한요소법을 이용한 텅스텐합금의 동적특성에 관한 연구 (A Study on the Dynamic Characteristics of Tungsten Alloy using Explicit FEM)

  • 황두순;노병래;홍대훈;홍성인
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2000년도 추계학술대회 논문집
    • /
    • pp.55-61
    • /
    • 2000
  • Tungsten heavy metal is characterized bi a high density and novel combination of strength and ductility. Among them, 90W-7Ni-3Fe is used for applications, where the high specific weight of the material plays an important role. They are used as counterweights, rotating inertia members, as well as for defense purposes(kinetic energy penetrators, etc.). Because of these applications, it is essential to detemine the dynamic characteristics of tungsten alloy. In this paper, Explicit FEM(finite element method) is employed to investigate the dynamic characteristics of tungsten heavy metal under base of stress wave propagation theory for SHPB, and the model of specimen is divided into two parts to understand the phenomenon that stress wave penetrates through each tungsten base and matrix. This simulation results were compared to experimental one and through this program the dynamic stress-strain curve of tungsten heavy metal can be obtained using quasi static stress-strain curve of pure tungsten and matrix.

  • PDF

보와 판이론에 의한 보형상 복합재의 충격 거동에 관한 연구 (A Study on the Impact Behavior of the Beam-Like Laminated Composite by the Beam and Plate Theories)

  • 김문생;안국찬;김규남
    • 대한기계학회논문집
    • /
    • 제13권4호
    • /
    • pp.643-652
    • /
    • 1989
  • 본 연구에서는 저자들에 의해 개발된 보와 판의 동적 유한 요소법으로 보형상을 지닌 적층 복합재의 형상비(길이/폭)와 적층 형태의 변화에 따른 충격 해석시 어느 이론의 결과가 더욱 적합한지에 대한 타당성 여부를 검토하고자 한다.

Exact third-order static and free vibration analyses of functionally graded porous curved beam

  • Beg, Mirza S.;Khalid, Hasan M.;Yasin, Mohd Y.;Hadji, L.
    • Steel and Composite Structures
    • /
    • 제39권1호
    • /
    • pp.1-20
    • /
    • 2021
  • An exact solution based on refined third-order theory (TOT) has been presented for functionally graded porous curved beams having deep curvature. The displacement field of the refined TOT is derived by imposing the shear free conditions at the outer and inner surfaces of curved beams. The properties of the two phase composite are tailored according the power law rule and the effective properties are computed using Mori-Tanaka homogenization scheme. The equations of motion as well as consistent boundary conditions are derived using the Hamilton's principle. The curved beam stiffness coefficients (A, B, D) are obtained numerically using six-point Gauss integration scheme without compromising the accuracy due to deepness (1 + z/R) terms. The porosity has been modeled assuming symmetric (even) as well as asymmetric (uneven) distributions across the cross section of curved beam. The programming has been performed in MATLAB and is validated with the results available in the literature as well as 2D finite element model developed in ABAQUS. The effect of inclusion of 1 + z/R terms is studied for deflection, stresses and natural frequencies for FG curved beams of different radii of curvature. Results presented in this work will be useful for comparison of future studies.

횡방향 하중을 받는 CFRF 적층복합재의 내부손상에 관한 연구 (A Study on the Damage of CFRP Laminated Composites Under Out-of-Plane Load)

  • 김문생;박승범;오득창
    • 한국정밀공학회지
    • /
    • 제12권11호
    • /
    • pp.98-109
    • /
    • 1995
  • An investigation was performed to study the inner damage of laminated composite plates subjected to out-of-plane load. During the investigation, inpact velocity and equivalent static load relationship was derived. Reddy's higher-order shear deformation theory(HSDT) and Hashin's failure criteria were used to determine inner stresses and damaged area. And impact testing was carried out on laminated composite plates by air gun type impact testing machine. The CFRP specimens were composed of [ .+-. 45 .deg. ]$_{4}$and [ .+-. 45 .deg. /0 .deg. /90 .deg. ]$_{2}$ stacking sequences with 0.75$^{t}$ * 26$^{w}$ * 100$^{l}$ (mm) dimension. After impact testing. As a result, a relationship holds between damaged area and impact energy, and a matrix cracking was caused by the interlaminar shear stress in the middle ply and was caused by the inplane transverse stress in the bottom ply.

  • PDF

Travel-Time 모델을 이용(利用)한 최적(最適) 서어비스 수준(水準) 결정(決定)에 관한 연구(硏究) (A Study on the Determination of the Optimal Service Level by the Travel-Time Models)

  • 박병기;정종식
    • 품질경영학회지
    • /
    • 제17권2호
    • /
    • pp.142-148
    • /
    • 1989
  • In order to determine the level of service which minimizes the total of expected cost of service and the expected cost of waiting for that service, the important considerations are to evaluate the distance traveled to and from a service facility (D) and the expected number of mechanics in queueing system (L). The travel-time models are very useful when the servers must travel to the customer from the service facility. Thus, in this paper we studied on the determination of the optimal service level by the travel-time models. In order to decide the optimal service level, (D) has been introduced as a uniform distribution and (L) has been introduced as M/M/S model of queueing theory.

  • PDF