• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1518-1520
• /
• 2002

Purpose of this research compares best transfer speed about applied frequency and voltage using characteristic of $L_1-B_4$ mode and $L_1-B_8$ mode linear ultrasonic motor that use piezoelectric effect. By method of study, analyzed best transfer speed measuring and comparison load status that use actuality telephone card in $L_1-B_4$ mode linear ultrasonic motor and no-load status of $L_1-B_8$ mode linear ultrasonic motor. Experiment result is applied frequency(58.4Hz) in $L_1-B_4$ mode linear ultrasonic motor (load state) and the best transfer speed by 19.8[cm/s] at applied voltage(56V) point. Also, $L_1-B_8$ mode linear ultrasonic motor (no-load state) is best transfer speed by applied frequency(27.9kHz) and 32.96[cm/s] at applied voltage (50V) point.

• 비파괴검사학회지
• /
• 제30권6호
• /
• pp.539-547
• /
• 2010

In this study, characteristics of the fundamental longitudinal guided wave mode, L(0,1), which is a usual mode employed in the inspection of the above-ground pipe, of the buried pipe were numerically investigated considering property changes in the surrounding soil. Results showed that soil conditions are significantly affecting the attenuation of L(0,1) mode in the pipe embedded in soil. Especially, if the soil is partially saturated, the attenuation of L(0,1) mode is larger and is very similar regardless of the degree of water saturation in the surrounding soil. However, when the soil is fully saturated, the attenuation of L(0,1) mode is less and show different trend with its partially saturated counterparts.

• 문화기술의 융합
• /
• 제8권5호
• /
• pp.483-488
• /
• 2022

본 연구에서는 1.55um의 파장을 갖는 DFB 레이저 다이오드에서 이득 격자와 굴절률 격자가 동시에 존재할 때, 오른쪽 거울면에 무반사 코팅을 하여 ρ_r=0 이 되도록 하였다. δL<0인 경우일 때, 발진 모드에 대하여, 발진 주파수와 발진 이득의 특성을 해석했다. 좌측 거울면 상에서 격자의 위상이 π에서부터 π/2씩 연속적으로 감소할 때마다, 각 발진 모드의 (αL, δL) 그래프 선들이 좌측으로 δL 값이 약 0.6 정도씩 낮아지고 있음을 볼 수 있다. 문턱이득이 가장 낮은 발진 모드의 경우는 κL=10인 경우이고, 이때 모드 선별성은 다른 κL 값의 경우와 비교할 때 상대적으로 낮다. 모드 선별성이 우수한 경우는 κL=0.1 에서부터 κL=6 정도까지이고, 모드 선별성이 우수할수록 주파수 안정성이 우수하다. 두 개의 벽개면을 갖는 경우와 비교하면, 무반사 코팅을 한 DFB 레이저 다이오드는, 발진 모드의 문턱 이득은 약 2배 정도로 높아지지만 모드 선별성 측면은 2배 정도 더 우수해 진다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.205-206
• /
• 2008

• 말소리와 음성과학
• /
• 제7권3호
• /
• pp.99-105
• /
• 2015

The current study investigates whether Korean-speaking adults show differential sensitivities to the sources of auditory stimuli (L1 Korean and L2 English) in utilizing VOT and f0 in the perceptual mode of L2 stops, and how the L2 proficiency interacts with the learners' low-level phonetic sensitivities in L2 perceptual mode. 48 Korean learners of English participated in the perception experiments where they rated the goodness of English /t/ and /d/ using an analogue scale. Two sets of stimuli (English and Korean sources) were prepared by manipulating VOT (6-steps) and f0 (5-steps) values of productions by an English male (L2 source condition) and a Korean male (L1 source condition). Findings showed that, in judging /t/-likeness, the listeners responded differently to the two auditory stimulus conditions by relying on VOT significantly more in English source condition than in Korean source condition. The listeners' English proficiency did not interact with these differential sensitivities to the auditory stimulus source either along the VOT dimension or the f0 dimension. The results of the current study suggest that low-level contextual information of the auditory source can affect the learners in faithfully being in the L2 perceptual mode.

• 한국광학회지
• /
• 제14권3호
• /
• pp.298-305
• /
• 2003

Index-coupled(IC) DFB 레이저에서 여러 가지 kL과 양 단면 반사율 조합에 대하여 문턱 전류 이상에서 주입 전류에 따른 단일 모드 수율을 구하였고 그 결과를 문턱 전류에서 f number에 따른 단일 모드 수율과의 관련성에 대하여 검토하였다. 그결과 문턱 전류 이상에서 단일 모드 수율과 문턱 전류에서 f number에 따른 단일 모드 수율과의 관련성이 매우 적음을 알수 있었다. 문턱 전류 이상에서 kL이 0.8과 1.25인 경우가 kL이 2와 3인 경우에 비하여 SHB 현상이 작아 단일 모드 수율이 큼을 알 수 있었다 또한 양 단면 반사율 조합이 AR-HR과 AR-CL에 대하여 AR 단면의 반사율이 단일 모드 수율에 미치는 영향에 대하여 살펴보았다. 양 단면 반사율 조합이 AR-HR인 경우 AR단면의 반사율이 작을수록 단일 모드 수율은 크게 나타났다. 반면에 AR-CL의 경우 최대의 단일 모드 수율을 나타내는 최적의 AR단면의 반사율이 존재하였다. 본 논문에서 수행한 IC DFB 레이저의 단일 모드 수율 계산에서는 kL이 0.8이고 양 단면 반사율 조합이 AR(1%)-HR인 경우가 문턱전류 이상에서 단일 모드 수율이 가장 컸다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권7호
• /
• pp.292-297
• /
• 2002

In this paper, a flat-type $L_{-}$-$B_{8}$ mode Ultrasonic Motor[USM] having the size of 80 x 20 x ${1.5}mm^3$($l{\times}\omega{\times}t$) was designed and fabricated to examine the characteristics of an ultrasonic vibration. We used ANSYS simulation program based on FEM to get the optimum design of this USM. As results of experiment, the fastest speed of revolution(v), the maximum torque(T) and the efficiency(n) were 37.5cm/s, 5.0 mN.m and 1.17% when 27.9KHz, 150N, 50V were applied respectively. And this flat-type $L_{-}$-$B_{8}$ mode USM could be controlled the speed of rotor revolution by applied voltage, frequency and pre-load of rotor as well as showed the characteristics of typical drooping torque-speed, large torque and high speed. So, we think that this flat-type $L_{-}$-$B_{8}$ mode USM has characteristics of enough torque and velocity to be usable for applications in forwarding device of an electric card or a paper, etc.

• Smart Structures and Systems
• /
• 제32권4호
• /
• pp.253-266
• /
• 2023

The time-reversal method is employed to improve the ability of pipeline defect detection, and a new approach of identifying the pipeline defect depth is proposed in this research. When the L(0,2) mode ultrasonic guided wave excited through a lead zirconate titinate (PZT) transduce array propagates along the pipeline with a defect, it will interact with the defect and be partially converted to flexural F(n, m) modes and longitudinal L(0,1) mode. Using a receiving PZT array attached axisymmetrically around the pipeline, the L(0,2) reflection signal as well as the mode conversion signals at the defect are obtained. An appropriate rectangle window is used to intercept the L(0,2) reflection signal and the mode conversion signals from the obtained direct detection signals. The intercepted signals are time reversed and re-excited in the pipeline again, result in the guided wave energy focusing on the pipeline defect, the L(0,2) reflection and the L(0,1) mode conversion signals being enhanced to a higher level, especially for the small defect in the early crack stage. Besides the L(0,2) reflection signal, the L(0,1) mode conversion signal also contains useful pipeline defect information. It is possible to identify the pipeline defect depth by monitoring the variation trend of L(0,2) and L(0,1) reflection coefficients. The finite element method (FEM) simulation and experiment results are given in the paper, the enhancement of pipeline defect reflection signals by time-reversal method is obvious, and the way to identify pipeline defect depth is demonstrated to be effective.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.356-359
• /
• 2003

This paper deals with a flat type ultrasonic motor, which uses a longitudinal-bending multi mode vibrator of rectangular form. This ultrasonic motor was designed by combination of the first longitudinal and eighth bending mode, and the motor consisted of a straight aluminum alloy bar bonded with piezoelectric ceramic elements as a driving element. The geometrical dimensions of the rectangular aluminum vibrator were determined by Euler-Bernoulli theory In the experimental device, piezoelectric ceramics ( a piece of ceramic for the L-mode, $24\;{\times}\;8\;{\times}\;1[mm]$, and four pieces for the B-mode, $12.5\;{\times}\;8\;{\times}\;1[mm]$) were attached to one side of a aluminum plate($100\;{\times}\;8\;{\times}\;1[mm]$), and the stator was supported with a plastic case. As results, no-load rpm was 50[rev./m] when applied voltage was 150[Vrms] at the resonance frequency, and as the voltage was increased, the rpm was increased.

• 전력전자학회논문지
• /
• 제24권2호
• /
• pp.134-137
• /
• 2019

A wide-bandwidth current controller is required for fast charging/discharging of super capacitor applications. Peak current mode is generally used to accomplish fast charging/discharging because this mode has fast response characteristics. However, the peak current mode control must have a slope compensation function to restrain sub-harmonics oscillation. The slope must be changed accordingly if the controlled output voltage is varied. However, changing the slope for every changed output voltage is not easy. The other solution, selecting the slope as the maximum value, causes a slow response problem to occur. Therefore, we propose a hybrid mode controller that uses a peak current and a newly specified valley current. Through the proposed hybrid mode control, the sub-harmonic oscillation does not occur when the duty is larger than 0.5 because of the fast response.