• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.6
• /
• pp.536-543
• /
• 2004

Slotless Permanent Magnet Brushless DC Motor(PM BLDC) with the characteristics of high speed and power density has been more widely used In Industrial and factory machine. Generally, PM BLDC meter is necessary that the three Hall-lCs evenly be distributed around the stator circumference in case of the 3 phase motor. The Hall-ICs are set up in PM BLDC Motor to detect the main flux from the rotor. therefore the output signal from Hall-ICs is used to drive a power transistor to control the stator winding current. However, instead of using three Hall-ICs, if it used only one Hall-IC, we can estimate information of the others phase in sequence through a rotor This paper identified the characteristics and performance by using one Hall-IC with the 3-phase, 2-pole, 6-slot PM BLDC motor.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.3B
• /
• pp.138-143
• /
• 2005

This paper aims to optimize an access probe algorithm for the CDMA 2000 system. The incremental value of PWR_STEP increases as NUM_STEP as 1dBm±0.2 for access probe of the area with good receiving sensitivity when the mobile station transmits via access channel and does not receive any ACK message. However, for the area with weak receiving sensitivity, according to the algorithm of open-loop power control, the transmitting power amplifier becomes saturated and PWR_STEP incremental value keeps performing access probe to 0dBm±0.2. Therefore interference and battery consumption increases according to the transmission of the mobile station. We have optimized the access probe algorithm according to the receiving sensitivity. We transmit the incremental value of access probe power, with delaying as much RT slot value as indicated by IS-95C standard in case of good receiving sensitivity and with delaying RT+l slot value in case of weak receiving sensitivity. Simulation results showed that the proposed algorithm contributes to decrease of the interference and battery consumption according to the transmitting power of the mobile station and improves the call duration.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.553-556
• /
• 2005

It is analyzed that WAP packet transmission time to improve performance of WAP using SAR algorithm in Bluetooth channel. The order for SAR algorithm to improve the transfer capability, it is fragmented in WTP total messages that are coming down from upper layer and then the packets are sent one at time in baseband. And it is studied that transmission time for WAP over bluetooth according to DM1, DM3 or DM5 packet type using SAR algorithm in Bluetooth piconet environment. This SAR algorithm decreases WAP packet transmission time of L2CAP baseband packets by sending packet which are spanning multiple slots.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.139-142
• /
• 2004

X-band Waveguide slot way antenna is developed for heliborne MTD radar applications. The antenna is composed of multi-layer waveguide structures. Each of them has it's own functions, such as, radiation, power/phase distribution, coupling, etc. Broad-wall offset slots are used for radiators, inclined slots on broad-wall for power distribution to radiating(branch) waveguide, some kind of coaxial probe structures for in-phase coupling and H-plane T-junction power dividers. Antenna is realized by precision machining and careful assembly. It is tested and measured by 3m${\times}$l.7m planar near-field probe, which is set-up in MTG. Far-field calculations have good agreement in tolerable bounds. Special but necessary process such as brazing, will increase the accuracy and performance. Results show promising possibilities of future applications for real systems.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.8 s.197
• /
• pp.89-96
• /
• 2007

In this paper, a new air bearing stage with magnetic preload and a linear motor has been developed for the small precision machine systems. The new air bearing stage is unique in the sense that permanent magnets attached bottom of the iron core of table are used not only for preloading air bearings in vertical direction but also for generating thrust force by current of the coil at base. The characteristics of air bearings using porous pads were analyzed with numerical method, and the magnetic circuit model was derived for linear motor for calculating required preload force and thrust force. A prototype of single axis miniature stage with size of $120(W){\times}120(L){\times}50(H)\;mm^3$ was designed and fabricated and examined its performances, vertical stiffness, load capacity, thrust force and positioning resolution.

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.9-12
• /
• 2005

단상 AC 콘덴서 유도전동기(분포권 방식 적용)는 소형 가전제품의 송풍용 모터로 활용되고 있는데, 이 전동기의 가장 큰 장점은 가격이 저렴하다는 것이다. 현재는 제조 원가가 싼 동남아시아에서 공급하고 있는 형편이다. 이로 인해 종래 모터와 비교해서 동일 특성을 가지고 원가 절감을 할 수 있는 집중권 방식의 AC 콘덴서 유도 전동기의 개발이 필요하다. 집중권 방식은 기존 분포권 방식에 비해 제조 공정이 간단하고Coil-Ending 길이가 짧아 재료비의 저감을 가져올 수 있다. 집중권 방식의 문제인 고조파 문제 해결을 위해 Skew의 도입을 검토하고 슬롯 형상 등을 고려하여 설계한 후 유한요소기법을 이용한 시변 자장 해석 기법을 이용하여 해석해 보았다.

• Journal of the Korean Chemical Society
• /
• v.45 no.5
• /
• pp.422-428
• /
• 2001

Retention relative times(RRTs) of PAH molecules and their derivatives in gas chromatography are trained and predicted in testing sets using a multiple linear regression(MLR) and an artificial neural network(ANN). The main descriptors of PAHs and their derivatives in QSRR are the square root of molecular weight(sqmw), molecular connectivity($^1{\chi}_v$), molecular dipole moment(D) and length-to-breadth ratios(L/B). The results of MLR shows that a heavy molecule has a propensity for long retention time. L/B closely related with slot model is a good descriptor in MLR. On the other hand, ANN which is not effected by the linear dependencies among the descriptors were exclusively based on molecular weight and molecular dipole moment. The variances which shows the accuracy of prediction for retention times in testing sets are 1.860, 0.206 for MLR and ANN, respectively. It was shown that ANN can exceed the MLR in prediction accuracy.

• Journal of Advanced Navigation Technology
• /
• v.20 no.5
• /
• pp.490-495
• /
• 2016

In the present study, a microstrip-fed monopole antenna is proposed for wireless local area network (WLAN) operations which cover dual band of 2.4 GHz (2.4 ~ 2.484 GHz) and 5 GHz (5.15 ~ 5.825 GHz). In order to obtain its compact structure and good omnidirectional radiation patterns, a modified inverted L-shaped slot separated from ground for impedance matching in 5 GHz band is etched on 2.4 GHz printed monopole antenna. The proposed antenna is designed and fabricated on a FR4 substrate with dielectric constant 4.3, thickness of 1.6 mm, and size of $30{\times}45mm^2$. The measured impedance bandwidths (${\mid}S_{11}{\mid}{\leq}-10dB$) of fabricated antenna are 270 MHz (2.22 ~ 2.48 GHz) in 2.4 GHz band and 890 MHz (5.08 ~ 5.97 GHz) in 5 GHz band respectively. In particular, high gain of more than about 4 dBi and good omnidirectional radiation patterns have been observed over the entire frequency band of interest.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.9
• /
• pp.912-918
• /
• 2003

In this paper, we designed and implemented the dual band monopole antenna for cellular CDMA(Code Division Multiple Access) and IMT-2000(International Mobile Telecommunication 2000) repeater. The antenna was designed by using 3D simulations program, HFSS(High Frequency Structure Simulator). Electrical characteristics were measured by using HP 8720C network analyzer and measured maximum S$\_$11/ was -10.9 dB for all frequency bands of interests in Cellular CDMA and IMT-2000. Simulation results for antenna gain at 859 MHz and 2027.5 MHz were 2.38 dBi and 4.02 dBi respectively with omni directional radiation pattern. The size of implemented antenna is compact and the antenna can be produced in low cost enough for commercialization.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.303-307
• /
• 2008

In this paper, a new co-planar waveguide ultra-wideband aperture is designed. The designed antenna consists of a rectangular aperture on a determined ground plane and a mushroom shaped stub. The mushroom-shaped stub, which is simple, convenient to analyze and optimise, has less parameter. This antenna has compact aperture size $21.1{\times}8.1mm^2$, designed on FR-4 substrate with dielectric constant of 4.3, thickness of l.5mm. CPW fed planar antenna has the advantages of wide-bandwidth, low-cost and easy interaction with the radio frequency front end circuitry.