• Journal of Korean Society of Forest Science
• /
• v.81 no.3
• /
• pp.273-279
• /
• 1992

Protoplasts isolated from leaf mesophyll tissues of Populus koreana ${\times}$ P. nigra var. italica were fused with those of P. euramericana cv. Guardi. Well expended healthy leaves of 5 to 7 week-old-plantlet grown in vitro were used as source materials. Leaves from P. koreana ${\times}$ P. nigra var. italica and P. euramericana cv. Guardi were digested in enzyme solution I (2.0% Cellulase, 1.2% Hemicellulase, 0.4% Macrozyme, 2.0% Driselase, 0.05% Pectolyase ; w/v) and enzyme solution II (1.0% Cellulase, 1.2% Hemicellulase, 0.4% Macrozyme, 2.0% Driselase, 0.05% Pectolyase ; w/v), respectively, The highest frequency of fusion among the protoplasts originated from the two source materials was approximately 21% using 40% PEG or 15% dextran. In addition, fusion frequency was enhanced by incorporating 30mM of $Ca^{2+}$ in eluting solution at pH 10.5. Dividing cells and/or mint-calli were obtained by culturing the fusion products in a liquid 8p-KM medium supplemented with 0.6M sucrose, $0.45{\mu}M$ 2, 4-D, and $0.5{\mu}M$ BA. Shoots were regenerated from the fusion product-derived calli after culture on MS medium containing $5.0{\mu}M$ zeatin. To verify the putative hybrid or cybrid, SDS-PAGE was carried out. From the 24 regenerants, just two plants showed intermediate protein band patterns compared with those of the original source plants.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2000.04a
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

• Archives of design research
• /
• v.2 no.1
• /
• pp.43-62
• /
• 1989

The luxury is the expression of human being's ornament instinct. In this study, in order to grasp the moulding system of the Korean's personal ornaments, the process of luxury prohibition was reviewed to search for to which direction the ornaments developed in the frame of the prohibited style connected closely to the character of the personal ornaments. The proiod was fixed from the old society to the late Chosun dynasty era. The beginning of the luxury in Korea seems to be the start of the luxury burial at the time of funeral in the age of Koguryo., In the era of Koguryo, 10th year of King Dongmyung (B. C. 28), in the era of Baekje, 27th year of King Koi(260), the prohibition of dress regulation and the style of dress were conducted. The prohibition of personal ornaments in Silla was started from King Bup:Heung, and in the 9th year of King Heung-Duk, the prohibition was conducted in order to correct the luxury of the nobles and set up the social discipline. In the 11 th of King Il-Sung-Ni-Sa-Kum, the use of gold, silver and jade was prohibited in the civilian circles. The prohibition of Silla was succeeded to Koryo era, and in the 7th year of King Kwangjong(956), the system of Baekgwan Gongbok(uniform for government officials) was set up, and the system of Sasek Gongbok(four color official uniform) was set up in the 11 th year of the same King, and the prohibition of the personal ornaments such as crown and band is considred to have been conducted. The prohibition of gold and silver was conducted in the first year of King Sungjong(982), and in the 4th year of King Chungryul(l260), the order of wearing the dress and hat in accordance with the Yusan dynasty and the Mongolian customs were widely circulated in the royal court and vivilian circles. The strong influence of Mongolia made the taste of the traditional personal ornaments laste. The personal ornaments were used for the nobles until the age of the Unified Sillar but even the common people could use them in case they were rich, and such a circumstances made the use of foreign goods inflated. The prohibition of Koryo era was aimed at the prohibition of the foreign goods of luxury, and the classification of the social status.In the age of Chosun Dynasty, the production of gold and silver was feeble indeed but the oute reason of the prohibition was to eradicate the luxurious tendency, elevate the custom of eradicate the luxurious tendency, elevate the custom of thrift, and moreover, the gold, silver and jade were no the products of Korea and the prohibition was conducted but the true reason was afor the tribute tt China and the classification of status. The prohibition of Chosun dynasty was conducted first in the June of the 3rd year of King Taejo The major contents of prohibition was no use of gold, silver and jade, coral, agate, amber, etc. of th, wives of the Dang-Sang-Kwan (Court Nobleman) or their sons and daughters, and the same pheno menon was common even at the time of marriage. The people engaged in the secret trade there of wert beheaded. The personal ornaments in the prohibition were the pendent trinket, Binyo (crossbar) ceremonial ornamental hat, ring, earring, ornamental knife, hat string, hat ornament, belt, etc. Thl luxurious marriage expenses out of the luxury was severe, and lose of the marriageable age because 0 non-preparing the marriage goods was the national evil. The prohibition oC luxury was hard to bt kept to the nobles or rich people, the same as old days and present days. The prohibition of th{ luxury and personal ornaments of Korea had nothing to do with the commons, and it was limited tc the nobles and rich people. The prohibition was aimed to cultivating the custom of frugality by eradicating the luxurious atmosphere, but it was chiefly due to the tribute to the China and tht discrimination of the. status. We can say that the recent personal ornament was the flower of handi craft industry bloomed in the prohibition and regulation.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.4
• /
• pp.347-357
• /
• 2003

This paper describes on the suppression of sea clutter on marine radar display using a cell-averaging CFAR(constant false alarm rate) technique, and on the analysis of radar echo signal data in relation to the estimation of ARPA functions and the detection of the shadow effect in clutter returns. The echo signal was measured using a X -band radar, that is located on the Pukyong National University, with a horizontal beamwidth of $$3.9^{\circ}$$, a vertical beamwidth of $20^{\circ}$, pulsewidth of $0.8 {\mu}s$ and a transmitted peak power of 4 ㎾ The suppression performance of sea clutter was investigated for the probability of false alarm between $l0-^0.25;and; 10^-1.0$. Also the performance of cell averaging CFAR was compared with that of ideal fixed threshold. The motion vectors and trajectory of ships was extracted and the shadow effect in clutter returns was analyzed. The results obtained are summarized as follows；1. The ARPA plotting results and motion vectors for acquired targets extracted by analyzing the echo signal data were displayed on the PC based radar system and the continuous trajectory of ships was tracked in real time. 2. To suppress the sea clutter under noisy environment, a cell averaging CFAR processor having total CFAR window of 47 samples(20+20 reference cells, 3+3 guard cells and the cell under test) was designed. On a particular data set acquired at Suyong Man, Busan, Korea, when the probability of false alarm applied to the designed cell averaging CFAR processor was 10$^{-0}$.75/ the suppression performance of radar clutter was significantly improved. The results obtained suggest that the designed cell averaging CFAR processor was very effective in uniform clutter environments. 3. It is concluded that the cell averaging CF AR may be able to give a considerable improvement in suppression performance of uniform sea clutter compared to the ideal fixed threshold. 4. The effective height of target, that was estimated by analyzing the shadow effect in clutter returns for a number of range bins behind the target as seen from the radar antenna, was approximately 1.2 m and the information for this height can be used to extract the shape parameter of tracked target..

• Food Science and Preservation
• /
• v.23 no.6
• /
• pp.811-818
• /
• 2016

The purpose of this study was to investigate changes in the amino acid content and physicochemical properties of Cheonggukjang prepared by using various soybean cultivars (Daewon, Deapung, Seadanbeak, and Taekwang) and a functional microorganism (Bacillus subtilis HJ18-9). These soybeans were conventional Cheonggukjang (control) and Cheonggukjang fermented with Bacillus subtilis HJ18-9 (treated). The moisture contents of steamed, control, and treated soybean were 62.45~67.12%, 63.28~67.14%, and 64.50~66.87%; amino-type nitrogen contents were 6.53~24.25 mg%, 27.63~122.09 mg%, and 37.29~133.48 mg%; and ammonia-type nitrogen contents were 26.92~47.95 mg%, 45.45~156.36 mg%, and 28.02~121.13 mg%, respectively. The umami taste associated with several amino acids (aspartic acid and glutamic acid) in Cheonggukjang was lower than that for steamed soybeans, while the bitter taste from amino acids (methionine, valine, isoleucine, leucine, and phenylalanine) was higher than that for steamed soybeans. The result of sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis showed that the molecular weight of steamed soybeans was less than 100 kDa, while control and treated groups showed low molecular weights below 34 kDa, confirming their protein hydrolysis to small molecular weight. These results are information for developing functional fermented soybean paste and diversification using soybean cultivars.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.28 no.5
• /
• pp.375-395
• /
• 2006

Purpose: Lingual nerve (LN) damage may be caused by either tumor resection or injury such as wisdom tooth extraction, Although autologous nerve graft is sometimes used to repair the damaged nerve, it has the disadvantage of necessity of another operation for nerve harvesting. Moreover, the results of nerve grafting is not satisfactory. The nerve growth factor (NGF) is well-known to play a critical role in peripheral nerve regeneration and its local delivery to the injured nerve has been continuously tried to enhance nerve regeneration. However, its application has limitations like repeated administration due to short half life of 30 minutes and an in vivo delivery model must allow for direct and local delivery. The aim of this study was to construct a well-functioning $rhNGF-{\beta}$ adenovirus for the ultimate development of improved method to promote peripheral nerve regeneration with enhanced and extended secretion of hNGF from the injured nerve by injecting $rhNGF-{\beta}$ gene directly into crush-injured LN in rat model. Materials and Methods: $hNGF-{\beta}$ gene was prepared from fetal brain cDNA library and cloned into E1/E3 deleted adenoviral vector which contains green fluorescence protein (GFP) gene as a reporter. After large scale production and purification of $rhNGF-{\beta}$ adenovirus, transfection efficiency and its expression at various cells (primary cultured Schwann cells, HEK293 cells, Schwann cell lines, NIH3T3 and CRH cells) were evaluated by fluorescent microscopy, RT-PCR, ELISA, immunocytochemistry. Furthermore, the function of rhNGF-beta, which was secreted from various cells infected with $rhNGF-{\beta}$ adenovirus, was evaluated using neuritogenesis of PC-12 cells. For in vivo evaluation of efficacy of $rhNGF-{\beta}$ adenovirus, the LNs of 8-week old rats were exposed and crush-injured with a small hemostat for 10 seconds. After the injury, $rhNGF-{\beta}$ adenovirus($2{\mu}l,\;1.5{\times}10^{11}pfu$) or saline was administered into the crushed site in the experimental (n=24) and the control group (n=24), respectively. Sham operation of another group of rats (n=9) was performed without administration of either saline or adenovirus. The taste recovery and the change of fungiform papilla were studied at 1, 2, 3 and 4 weeks. Each of the 6 animals was tested with different solutions (0.1M NaCl, 0.1M sucrose, 0.01M QHCl, or 0.01M HCl) by two-bottle test paradigm and the number of papilla was counted using SEM picture of tongue dorsum. LN was explored at the same interval as taste study and evaluated electro-physiologically (peak voltage and nerve conduction velocity) and histomorphometrically (axon count, myelin thickness). Results: The recombinant adenovirus vector carrying $rhNGF-{\beta}$ was constructed and confirmed by restriction endonuclease analysis and DNA sequence analysis. GFP expression was observed in 90% of $rhNGF-{\beta}$ adenovirus infected cells compared with uninfected cells. Total mRNA isolated from $rhNGF-{\beta}$ adenovirus infected cells showed strong RT-PCR band, however uninfected or LacZ recombinant adenovirus infected cells did not. NGF quantification by ELISA showed a maximal release of $18865.4{\pm}310.9pg/ml$ NGF at the 4th day and stably continued till 14 days by $rhNGF-{\beta}$ adenovirus infected Schwann cells. PC-12 cells exposed to media with $rhNGF-{\beta}$ adenovirus infected Schwann cell revealed at the same level of neurite-extension as the commercial NGF did. $rhNGF-{\beta}$ adenovirus injected experimental groups in comparison to the control group exhibited different taste preference ratio. Salty, sweet and sour taste preference ratio were significantly different after 2 weeks from the beginning of the experiment, which were similar to the sham group, but not to the control group.

• Journal of Bio-Environment Control
• /
• v.27 no.4
• /
• pp.400-406
• /
• 2018

In this experiment the effect of supplemental lighting on the growth and yield of cucumber (Cucumis sativus L. 'Fresh') plants during low radiation period of winter season were investigated in glasshouses using common high-pressure sodium (HPS) lamps and newly developed plasma lighting system (PLS) lamps. Plants grown without supplemental lighting were considered as a control. Supplemental lighting was provided from November 20th, 2015 to March 15th, 2016 to ensure 14-hour photoperiod (natural+supplemental light), also lamps were operated automatically when the outside sun radiation levels were less than $100W{\cdot}m^{-2}$. Spectral analysis showed that HPS lamp had a discrete spectrum, lacked of the radiation in the 400-550 nm wave band (blue-green light), but had a high output in the orange-red region (550-650 nm). A higher red light output resulted in an increased red to far-red (R/FR) ratio in HPS lamp. PLS had a continuous spectrum and had a peak radiation in green region (490-550 nm). HPS has 12.6% lower output in photosynthetically active radiation (PAR) but 12.6% higher output in near infra-red (NIR) spectral regions compared to PLS. Both HPS and PLS lamps emitted very low levels of ultra-violet radiation (300-400 nm). Supplemental lighting both from HPS and PLS lamps increased plant height, leaf number, internode number and dry weight of cucumber plants compared to control. Photosynthetic activity of cucumber plants grown under two supplemental lighting systems was comparable. Number of fruits per cucumber plant (fruit weight per plant) in control, PLS, and HPS plots were 21.2 (2.9 kg), 38.7 (5.5 kg), and 40.4 (5.6 kg), respectively, thereby increasing yield by 1.8-1.9 times in comparison with control. An analysis of the economic feasibility of supplemental lighting in cucumber cultivation showed that considering lamp installation and electricity costs the income from supplemental lighting increased by 37% and 62% for PLS and HPS lamps, respectively.

• Tuberculosis and Respiratory Diseases
• /
• v.45 no.2
• /
• pp.369-379
• /
• 1998

Background: Platelet-activating factor(PAF) might play an important role in the development of acute respiratory distress syndrome. Since PAF induced lung injury is similar to changes of acute respiratory distress gyndrome, and abnormalities in surfactant function have been described in acute respiratory distress syndrome, the authors investigated the effects of PAF on the regulation of surfactant protein A, B and C mRNA accumulation Method: The effects of PAF on gene expression of surfactant protein A, B and C in 24 hours after intratracheal injection of PAF in rats. Surfactant protein A, B and C mRNAs were measured by filter hybridization. Results: The accumulation of SP-A mRNA in PAF treated group was significantly decreased by 37.1 % and 41.6%, respectively compared to the control group and the group treated with Lyso-PAF(p<0.025, p<0.01). The accumulation of SP-B mRNA in PAF treated group was decreased by 18.7% and 32.2 %, respectively compared to the control group and the group treated with Lyso-PAF but statistically not significant. The accumulation of SP-C mRNA in PAF treated group was significantly decreased by 30.7% and 38.5%, respectively compared to the control group and the group treated with Lyso-PAF(p<0.l, p<0.01). Conclusion: These findings represent a marked inhibitory effects of platelet-activating factor on surfactant proteins expression in vivo. This supports, in turn, 'platelet-activating factor might be related to pathogenesis of acute respiratory distress syndrome.

• Journal of Plant Biotechnology
• /
• v.41 no.1
• /
• pp.56-63
• /
• 2014

Using commercial radish varieties for processing, about 30% of radish was discarded due to the root shape and low purity. To raise the processing ability, we tried to develop a new variety producing H-shaped root. As another characteristic required in variety for processing is high purity, we tried to raise purity using simple sequence repeats (SSR) markers for testing seed purity in every segregating generation. To develop Male-sterile (MS) seeding parent, we crossed commercial variety of 'Gwan dong spring' and 'Gyeo ryong spring'. One elite inbred was selected as recurrent parent for the MS plant. The major horticultural traits of selected inbred line were disease resistance, late bolting, heat resistance and bright green root top color. To develop pollen parent, we crossed commercial variety of 'Tae sang king' and 'Seoul spring'. We used individual selection method to develop H-shaped hard root and disease resistant inbred. In each segregating generation, we selected one plant based on phenotype and the uniformity of selected plant was tested by SSR markers using self-pollinated seeds. In the first segregating generation, 64.6% of sib plants shared the same band in PCR amplification using ACMP-490 primer and 66.7% using cnu-316 primer. The uniformity of segregating generations using ACMP-490 and cnu-316 raised in second generation to 68.8%, 70.8%, respectively; in third generation to 93.8%, 100%; in fourth generation to 93.8%, 100%; in fifth generation to 95.8%, 100%; in sixth generation to 100%, 100%. A novel cross was made using selected MS parent and pollen parent. When we checker the horticultural traits using autumn cultivation, the novel cross variety produced H-shaped root comparing other commercial varieties and produced highly uniform radish. Thus we registered this novel cross variety as 'YR ORE' at 2013 (Registration No. 4550).

• Korean Journal of Remote Sensing
• /
• v.34 no.6_4
• /
• pp.1479-1488
• /
• 2018

On September 3rd 2017, strong artificial seismic signals from North Korea were detected in KMA (Korea Meteorological Administration) seismic network. The location of the epicenter was estimated to be Punggye-ri nuclear test site and it was the most powerful to date. The event was not studied well due to accessibility and geodetic measurements. Therefore, we used remote sensing data to analyze surface changes around Mt. Mantap area. First of all, we tried to detect surface deformation using InSAR method with Advanced Land Observation Satellite-2 (ALOS-2). Even though ALOS-2 data used L-band long wavelength, it was not working well for this particular case because of decorrelation on interferogram. The main reason would be large deformation near the Mt. Mantap area. To overcome this limitation of decorrelation, we applied offset tracking method to measure deformation. However, this method is affected by window kernel size. So we applied various window sizes from 32 to 224 in 16 steps. We could retrieve 2D surface deformation of about 3 m in maximum in the west side of Mt. Mantap. Second, we used Pleiadas-A/B high resolution satellite optical images which were acquired before and after the 6th nuclear test. We detected widespread surface damage around the top of Mt. Mantap such as landslide and suspected collapse area. This phenomenon may be caused by a very strong underground nuclear explosion test. High-resolution satellite images could be used to analyze non-accessible area.