• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.5
• /
• pp.279-286
• /
• 2021

In this study, we investigated the behavior characteristics of the L-type flange bolt connection, which is used to connect upper and lower flanges having L-type ring sections, by bolts. This connection is mainly used in domestic wind turbine structures, wherein it is a vital component as any imperfection could cause the collapse of the entire structural system. Therefore, understanding the behavior characteristics of the L-type flange bolt connection is imperative. In this study, the connection's response to external force was simulated using finite element (FE) analysis and the FE model was idealized to behave as a single L-type bolt flange. The variation in the bolt tension and the L-type flange stress were analyzed to understand the behavior characteristics of the connection. Moreover, the bolt-load function models proposed by Petersen, Schmidt/Neuper and VDI 2230, theoretically expressing a relation between bolt tension and external force, were compared to evaluate the suitability of the FE analysis and analyze the significant behavior characteristics of the connection. Furthermore, the changes in the bolt-load curve due to the variations in the partial dimensions of the L-type flange bolt connection were analyzed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.86-93
• /
• 2020

The demand for maintenance in Korea infrastructure facilities constructed since the 1970s has increased significantly compared to the demand for new construction. Moreover, after the Gyeongju and Pohang earthquakes, seismic performance evaluation, repair, and retrofitting projects have been carried out. Therefore, in this study, a specimen was designed following the L-type GFRP Plate Externally Bonded Retrofit method, one among other retrofit methods. The L-type GFRP Plate was bonded to the specimen by epoxy and a washered steel nail. A four-point bending test was performed to confirm the strengthening effect of the Externally Bonded Retrofit method using an L-type GFRP Plate. The strengthening effect of the L-type GFRP plate was proven experimentally, and the behavior of the beam designed following the L-type GFRP Plate Externally Bonded Retrofit method was evaluated according to Korea's "Design Manual & Specification for Strengthening of RC Structures by Advanced Composites System". Furthermore, the effectiveness of the bonding method, a combination of epoxy and washered steel nail, was also checked. The results showed that the design, according to the guidelines mentioned above, predicted the strength of the member well, but the failure mode did not satisfy the design assumption because of unexpected damage to the GFRP plate due to the fixing method, washered steel nail.

• Korean Journal of Materials Research
• /
• v.6 no.2
• /
• pp.235-241
• /
• 1996

등온자비 AuCu에 2.4, 4.3, 6.1at% Zn이 첨가된 합금의 시효경화거동과 상변태를 조사하였다. AuCu l형이 단독으로 존재하는 경우는 경도가 시효초기에 급격히 상승한 후 저하하였고, Zn 첨가량의 증가에 따라 규칙-불규칙 전이온도(Tc)가 약간 하강하였지만, AuCu l형+AuCu ll형의 공존영역의 온도는 훨씬 낮아졌다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.536-539
• /
• 2009

BIRDI(Bridge Inspection Robot Development Interface)에서 현재 개발된 첨단굴절로봇차는 비전 시스템과 로봇 플랫폼을 붐에 장착하여 교량 하부를 점검하는 점검용차량이다. 본 연구에서는 첨단굴절로봇차의 포스트 붐에 엑츄에이터를 장착하여 강풍 등으로 발생이 예상되는 유해 진동을 제어할 수 있는 시스템을 제안하였으며, 성능 평가를 위해 수치적 연구를 수행하였다. 제안된 제어시스템의 수치적 연구를 위해 현재 제작된 포스트 붐과 작업 붐의 제원을 이용하여 모델링 하였으며, 적절한 주파수 특성을 가진 하중을 가정하였으며, 최적 제어이론인 PD제어기법인 피드백 제어기법을 적용하여 수치해석을 수행 하였다. 수치해석 결과, 제안된 제어시스템은 L형 붐에 발생되는 유해 진동을 저감시킴을 확인하였다. 본 연구를 통해 제안된 시스템의 진동제어 성능을 입증하였으며, 실제 첨단굴절로봇차에 적용될 경우 점검 시스템의 성능을 향상시킬 수 있을 것으로 사료된다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.14 no.2
• /
• pp.97-106
• /
• 2001

본 연구에서는 트러스 구조물의 이산최적설계를 위해 유전알고리즘(GA)을 적용하였다. 확률론적인 절차를 통해 설계에 필요한 초기 집단을 생성시킨 후, 설계를 개선시키기 위해서 자연선택 및 적자생존의 원리를 적용하였다. 다하중조건 하에서 트러스 구조물의 중량 최소화를 위해 응력 및 변위 제약을 고려하였다. 먼저, 이미 잘 알려진 트러스 구조물에 대해서 GA를 이용하여 얻은 최적해와 기존 문헌들에서 제시하고 있는 값들을 비교함으로써 GA의 신뢰성 및 적용성을 검증하였고, 이러한 신뢰성 검증을 바탕으로 사용성 있는 트러스 구조물의 이산최적설계를 위해 현재 생산중인 강재제원표로부터 부재가 선택되도록 하였다. 강재의 단면으로는 L형강을 사용하였으며, L형강의 강종은 9개의 강종들 (SS 400, SWS 400, SMA 41, SWS 490Y, SWS 520, SMA 50, SWS 570, SMA 58) 중에서 설계자에 의해 자유롭게 선택되도록 하였다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.4
• /
• pp.8-15
• /
• 2011

In this paper, the influence of a crack on the natural frequency of cracked cantilever L-shaped beam with coupled bending and torsional vibrations by analytically and experimentally is analyzed. The L-shaped beam with a crack is modeled by Hamilton's principle with consideration of bending and torsional energy. The two coupled governing differential equations are reduced to one sixth-order ordinary differential equation in terms of the flexural displacement. The crack is assumed to be in the first, second and third mode of fracture and to be always opened during the vibrations. The theoretical results are validated by a comparison with experimental measurements. The maximal difference between the theoretical results and experimental measurements of the natural frequency is less than 7.5% in the second vibration mode.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.6
• /
• pp.78-86
• /
• 2010

This paper aims to investigate the natural frequency of a cracked cantilever L-beams with a coupled bending and torsional vibrations. In addition, a theoretical method for detection of the crack position and size in a cantilever L-beams is presented based on natural frequencies. Based on the Euler-Bernoulli beam theory, the equation of motion is derived by using extended Hamilton's Principle. The dynamic transfer matrix method is used for calculation of a exact natural frequencies of L-beams. In order to detect the crack of L-beams, the effect of spring coefficients for bending moment and torsional force is included. In this study, the differences between the actual data and predicted positions and sizes of crack are less than 0.5% and 6.7% respectively.

• Journal of Korea Foundry Society
• /
• v.4 no.1
• /
• pp.21-31
• /
• 1984

IAD( Implicit Alternative Direction ) FDM을 사용하여 금형에서의 L형 순수알미늄 주물에 대하여 그 응고상황의 수치적 해석을 2차원적으로 시도하였다. 계산은 주형비 ( 주형의 부피/주물의 부피 )에 따라 금형 표면에서의 대류현상과 금형/주물계면에서의 Air-gap형성 현상을 고려에 넣은 경우와 그렇지 않은 경우로 나누어 각각 콤퓨터에 의해 계산하여 그 결과를 비교하였다. 또한 금형/주물 계면주위의 온도구배를 구함으로써 Air-gap이 열전달에 미치는 영향을 검토하였다. 이와같은 시도에 의하여 주물의 응고시간, 응고방향 Hot spot의 위치 등 주조에 있어서 매우 중요한 사항들을 알아내는데 Numerical Analysis 이 매우 유용한 방법임을, 특히 금형표면에서의 대류현상과 금형/주물 계면에서의 Air-gap형성현상을 고려에 넣은 경우에 더욱 정확한 결과를 기대할 수 있다는 것이 확인되었다.

• Transactions of Materials Processing
• /
• v.5 no.4
• /
• pp.281-287
• /
• 1996

Two kinds of blank shapes optimum and square are adopted to investigate formability. Optimum blank shape is determined to construct an L-shape cup with uniform height and without flange part. For this purpose rigid-plastic FEM analysis is applied with backward tracing technique. Maximum cup depth and strain distribution are measured experimentally for the products of the two kinds of blank shapes which are optimum and square. it is confirmed that deeper cup without severe thickness reduction can be obtained from the optimum shape.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.512-513
• /
• 2018

Trap-assisted-tunneling (TAT) degrades subthreshold slope of real-world tunneling field-effect-transistors (TFET) and it should be considered in the simulation. However, its mechanism is not very well understood in line tunneling type L-shaped TFET (LTFET). This study investigates TAT mechanism in LTFETs using dynamic nonlcoal Schenk model. Both phonon assisted and direct band to trap tunneling events are considered in this study.