• 제목/요약/키워드: L/C ratio

검색결과 2,345건 처리시간 0.032초

ROWECELL시험에 의한 해성점토의 압밀계수에 대한 연구 (Study on the Coefficient of Consolidation of Marine Clay by Rowecell Consolidation Test)

  • 김종국;차영일;김혁기;김영웅
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2003년도 봄 학술발표회 논문집
    • /
    • pp.725-732
    • /
    • 2003
  • It was achieved that Rowecell test for this undisturbed sample was picked by Block sampler($\phi$:250mm, L:500mm) and hydraulic piston sampler($\phi$:76mm, L:850mm) in the marine clay of YONGYUDO and YEONGJONGDO in this research. Ratio of coefficient of consolidation was analyzed through comparison with C$\_$h/ by CPTu and C$\_$v/ and C$\_$h/ by existent consolidation test. According to analysis, coefficient of consolidation of block sample is fairly greater than coefficient of consolidation of piston sample. And the bigger diameter of undisturbed sample, sample disturbance could know decreasing. Coefficient of consolidation by Rowecell test measured more greatly than coefficient of consolidation by existent consolidation test. Rowecell test could know decreasing consolidation rate because of smear effect by Mandrel injection. Also, C$\_$h/ by CPTu shows deviation by each analysis method, selection of suitable analysis method judged by important leading in the coefficient of consolidation.

  • PDF

향신재료를 이용한 Oleoresin제조에 관한 연구 3. 마늘 Oleoresin의 속성제조 (Studies on Oleoresin Product from Spices 3. Rapid Processing of Garlic Oleoresin)

  • 배태진;강훈이;김현주;최옥수;하봉석
    • 한국식품영양과학회지
    • /
    • 제22권1호
    • /
    • pp.73-77
    • /
    • 1993
  • This study was intended to investigate the effects of solvents, particle size of a sample, sample to solvent ratio, temperature and time on the extraction of garlic oleoresin. Among eleven solvents used for oleoresin extraction from garlic, the optimal solvent was methyl alcohol. The most appropriate particle size of garlic, extracting temperature and mixing ratio of garlic to methyl alcohol were 20mesh, $25^{\circ}C$ and 1 to 3(w/w), respectively. On the basis of yield in oleoresin extraction, optimum extracting time was about 4 hours. The yield of oleoresin under the above-mentioned conditions was 21.3%. "L" and "b" as color appearance were decreased, whereas "a"was increased slightly during 60 days storage at 5$^{\circ}C$, $25^{\circ}C$ and 4$0^{\circ}C$. Changes in the pyruvate content showed close relation to pH value. During storage pyruvate content of garlic oleoresin was decreased as increasing storage temperature.

  • PDF

Octapeptide (Alanine Angiotensin) 의 合成 (Synthesis of an Octapeptide (Alanine Angiotensin))

  • 박원길
    • 대한화학회지
    • /
    • 제5권1호
    • /
    • pp.33-37
    • /
    • 1961
  • We have shown that carboxy-peptidase destroys the biological activity of angiotensin octa-and deca-peptides. Since Proline occurs as the seventh amino acid from the amino end of the chain and since carboxypeptidase does not cleave proline from a peptid chain, it is evident that the heptapeptid H.asp-arg-val-tyr-ileu-his-pro.OH is formed by this hydrolysis. This peptide must then be biologically inactive. In order to determine whether the phenyl group of the C-terminal amino acid was the necessary requirement for biological activity of the octapeptide, $ala^8$ angiotensin octapeptide(amino acids of peptides numbered from amino end) was synthesized. For this synthesis the four dipeptides were prepared: carbobenzoxy-L-prolyl-L-alanine-P-nitrobenzyl-ester, m.p. $134-135^{\circ}C,$ carbobenzoxy-L-isoleucyl-imidazole benzyl-L-histidine methyl ester, m.p. $114-116^{\circ}C,$ carbobenzoxy-L-valyl-L-tyrosine hydrazide and carbobenzoxy B-benzyl-L-aspartyl-nitro-L-arginine. The first three dipeptides were obtained as crystalline compounds. Imidazole-benzyl-L-histidine was used in the hope that it would block the histidine imidazole against side reactions in steps subsequent to the formation of the C-terminal tetrapeptide. Also, it was through that the imidazole benzylated peptides would be easier to crystallize. This, however, was not the case. The tetrapeptide, carbobenzoxy-L-isoleucyl-L-im, benzyl-histidyl, L-prolyl-L-alanine-nitrobenzyl ester was not obtained in a crystalline form. Neither could the mono-or dihydrobromide of the tetrapeptide free base be induced to crystallize. Carbobenzoxy-L-valyl-L-tyrosine azide was condensed with the tetrapeptide free base to yield the protected hexapeptide; carbobenzoxy-L-valyl-L-tyrosyl-L-isoleucyl-L-im, benzyl, histidyl-L-Prolyl-L-alanine-nitrobenzyl ester. Upon removal of the carbobenzoxy group with hydrogen bromide in acetic acid an amorphous free base hexapeptide ester was obtained. This compound gave the correct C, H, N analysis and contained the six amino acids in the correct ratio. The octapeptide was obtained by condensing this hexapeptide with carbobenzoxy-B-benzyl-L-aspartyl-nitro, L-arginine using the mixed anhydride method of condensation. This amorphous product was proven to be homogenous by chromatography in two solvent systems and upon hydrolysis yielded the eight amino acids in correct ratio. The five protecting groups were removed from the octapeptide by hydrogenolysis over palladium black catalyst. Biological assay of the free peptide indicated that it possessed less than 0.1 per cent of both pressor and oxytocic activity of the phenylalanine8 angiotensin. This suggests that the phenyl group is a point of attachment between angiotensin and its biological receptor site.

  • PDF

반도체 웨이퍼 제조공정(製造工程) 중 발생혼합폐산(發生混合廢酸)으로부터 불산, 질산 및 초산의 각 산 회수(回收)에 관한 연구(硏究) (Study on Recovery of Separated Hydrofluoric Acid, Nitric Acid and Acetic Acid Respectively from Mixed Waste Acid Produced during Semiconductor Wafer Process)

  • 김주엽;김현상;배우근
    • 자원리싸이클링
    • /
    • 제18권4호
    • /
    • pp.62-69
    • /
    • 2009
  • 반도체 웨이퍼 제조 공정 중 발생하는 질산, 불산, 초산으로 구성된 혼합폐산을 재활용하기 위한 연구를 수행하였다. 초기에 $NaNO_3$와 Si powder를 사용하여 불산을 $Na_2SiF_6$로 침전시켜 불소화합물을 제조하였고, 이 때 혼산 중 불산의 농도는 초기 127g/L에서 0.5g/L로 낮아져 불산 회수율은 99.5%였다. $Na_2SiF_6$ 제조 후 남은 혼산의 질산과 초산의 농도는 각각 502g/L, 117g/L였고, 이 혼산에 NaOH를 투입하여 pH=4로 맞춘 후 -440 mmHg, $95^{\circ}C에서 증발농축을 하여 초산 분리 회수하였다. 회수된 초산의 농도는 약 15%였고, 회수율은 85.3% 이상이었다. 또한, 농축여액을 $20^{\circ}C$까지 냉각하여 $NaNO_3$ 결정을 석출시킴으로 질산나트륨을 제조하였고, 그 회수율은 약 93%이상이었다. 제조된 $Na_2SiF_6$$NaNO_3$$90^{\circ}C$에서 건조시킨 후, XRD 분석한 결과, 순수 $Na_2SiF_6$$NaNO_3$만 합성된 것을 확인하였고, 그 순도는 각각 약 97%, 98%로 시판용과 유사하였다.

Optimal conditions for biological hydrogen production from food waste

  • Wongthanate, Jaruwan;Chinnacotpong, Kittibodee
    • Environmental Engineering Research
    • /
    • 제20권2호
    • /
    • pp.121-125
    • /
    • 2015
  • Biohydrogen production from food waste via dark fermentation was conducted by using mixed culture under various environmental conditions (initial pH, initial F/M ratio, initial ferrous iron ($Fe^{2+}$), and temperature condition) in batch reactor. The results revealed that the maximum hydrogen yield of $46.19mL\;H_2/g\;COD_{add}$ was achieved at the optimal conditions (initial pH 8.0, initial F/M ratio 4.0, initial iron concentration 100 mg $FeSO_4/L$ and thermophilic condition ($55{\pm}1^{\circ}C$)). Furthermore, major volatile fatty acid (VFA) productions of butyrate (765.66 mg/L) and acetate (324.69 mg/L) were detected and COD removal efficiency was detected at 66.00%. Therefore, these optimal conditions could be recommended to operate a system.

하계 강우기 전.후 신구저수지 내 입자성유기물의 수직분포 및 기원 연구 - 탄소 및 질소 안정동위원소비의 활용 - (A Study on Vertical Distribution and Origin of Particulate Organic Matter in Shingu Reservoir in Pre-monsoon and Post-monsoon Period - Application of Carbon and Nitrogen Stable Isotope Ratio -)

  • 김민섭;이연정;신경훈;황순진
    • 생태와환경
    • /
    • 제41권spc호
    • /
    • pp.27-34
    • /
    • 2008
  • 본 연구는 부영양상태의 신구저수지에서 강우기 전 후의 수질 변화와 강우기 유입수의 영향을 평가하기 위해 이루어졌다. 강우기 전에는 수심에 따른 수온차가 $1^{\circ}C$이하였지만 강우기 후에는 $4^{\circ}C$차 이상까지 벌어져 수온 약층이 뚜렷하게 형성되었다. 탁도는 강우기 전보다 강우기 후에 표층에서 12NTU, 저층 120NTU로 크게 증가하였다. POC의 농도는 강우기 전의 조사에서 수심에 따라서 $4.96{\sim}6.68mg\;L^{-1}$의 범위를 나타내고 강우기 후의 조사에서는 $1.73{\sim}5.32mg\;L^{-1}$의 범위를 나타내고 있어 전체적으로 강우기 전보다 강우기 후의 POC의 농도가 낮았으나 수심에 따라서 크게 증가하는 경향을 보이고 있다. 또한, DOC의 농도는 강우기 전의 조사에서 $3.82{\sim}3.96mg\;L^{-1}$의 범위를 나타내고 있고, 강우기 후의 조사에서 $2.18{\sim}2.57mg\;L^{-1}$의 범위를 나타내고 있어 전체적으로 강우기 전보다 강우기 후의 DOC농도는 감소하고 있다. 또한 강우기 후 저층의 높은 탁도층에서 강우기 전보다 입자성유기물의 C/N비가 크게 증가하였고 입자성 유기물의 ${\delta}^{13}C$${\delta}^{15}C$값이 뚜렷하게 가벼운 값을 보이는 것으로 볼 때 저수지 주변 유역에서 유입된 유기물의 영향을 크게 받았다는 것을 알 수 있다. 본 연구 결과로 볼 때 농업용 저수지인 신구저수지는 하계 강우기시 유입하천을 통해 외부로부터 유입된 육상식물 유기물이 저층에 부유된 상태로 존재하며 이는 저수지 내 저층 수생태계의 에너지 흐름에 영향을 줄 수 있는 것으로 사료된다.

공단 폐수 슬러지의 퇴비화 최적조건 (Study on Optimum Conditions for the Composting of Industrial Wastewater Sludge)

  • 이홍재;조주식;허종수
    • 한국환경과학회지
    • /
    • 제7권1호
    • /
    • pp.96-103
    • /
    • 1998
  • To study the optimum conditions of composting with industrial wastewater sludge, the variations of temperature and $CO_2$ generation amount during the composting periods were investigated. The conditions were that industrial wastewater added to bulking agents such as sawdust and rice hull was used, and differently treated with microorganism seeding or not, initial C/N ratios, air flow rate and initial moisture contents, respectively. The results were summarized as follows : Seeding 5% of microorganism was higher the temperature than not seeding. And using sawdust as bulking agents, and adjusting 30~40 of Initial C/N ratio, 200ml/l.min. of k flow rate and 67~68% moisture contents were higher the temperature than any other conditions. Seeding 5% of microorganisms was higher $CO_2$ generation amount than not seeding. And that was much in the order of 7~40, 30~34 and 22~23 of initial C/N ratio. Judging from the results, it should be considered that the optimum conditions in the composting of industrial wastewater sludge were seeding of 5% microorganisms, and adjusting 30~34 of Initial C/N ratio, 200ml/l min. of air flow rate and 67~68% of Intitial moisture contents. The contents of inorganic matters and C/N ratio during the composting periods at optimum condition were a little Increased. and heavy metals contents after composting were lower than standard for fortllizer.

  • PDF

다성분 복소트레이스 분석법에 기초한 선형 및 타원형 입자운동 분리 (Separation of Linear and Elliptic Particle Motions Using Multi-Component Complex Trace Analysis)

  • 김기영;이소영
    • 지구물리와물리탐사
    • /
    • 제12권3호
    • /
    • pp.246-254
    • /
    • 2009
  • 균질매질과 자유면 경계에서 선형입자운동을 하는 파를 타원형 입자운동을 하는 파로부터 분리하기 위한 새로운 분극필터를 다성분 복소트레이스 분석법에 근거하여 개발하였다. 균질매질에서의 입자운동을 모사한 합성파를 통해 이 필터의 성능을 검증한 결과, P파와 레일리파의 수평성분/수직성분 진폭비 $C_L$$C_R$를 알고 있을 경우, 이 분극필터는 레일리파 성분을 완벽하게 제거하여 이상적인 결과를 보인다. 이 분극필터 결과의 수직성분 오차는 $C_R$/$C_L$에 따라 증가하고, 수평성분 오차는 $C_R$ $C_L$에 따라 증가한다. 특히 수직성분 오차는 $C_L$$C_R$의 적용값/모델값 비율($C_L'$/$C_L$$C_R'$/$C_R$)이 작을 때 급격히 증가하며, 입사각이 작을 때는 $C_R'$/$C_R$에, 클 때는 $C_L'$/$C_L$에 각각 민감하다. S파와 레일리파가 중첩되어 있는 경우는, 입사각이 P파 입사각의 보각인 경우와 동일하다.

Couette-Poiseuille flow based non-linear flow over a square cylinder near plane wall

  • Bhatt, Rajesh;Maiti, Dilip K.;Alam, Md. Mahbub;Rehman, S.
    • Wind and Structures
    • /
    • 제26권5호
    • /
    • pp.331-341
    • /
    • 2018
  • A numerical study on the flow over a square cylinder in the vicinity of a wall is conducted for different Couette-Poiseuille-based non-uniform flow with the non-dimensional pressure gradient P varying from 0 to 5. The non-dimensional gap ratio L (=$H^{\ast}/a^{\ast}$) is changed from 0.1 to 2, where $H^{\ast}$ is gap height between the cylinder and wall, and $a^{\ast}$ is the cylinder width. The governing equations are solved numerically through finite volume method based on SIMPLE algorithm on a staggered grid system. Both P and L have a substantial influence on the flow structure, time-mean drag coefficient ${\bar{C}}_D$, fluctuating (rms) lift coefficient ($C_L{^{\prime}}$), and Strouhal number St. The changes in P and L leads to four distinct flow regimes (I, II, III and IV). Following the flow structure change, the ${\bar{C}}_D$, $C_L{^{\prime}}$, and St all vary greatly with the change in L and/or P. The ${\bar{C}}_D$ and $C_L{^{\prime}}$ both grow with increasing P and/or L. The St increases with P for a given L, being less sensitive to L for a smaller P (< 2) and more sensitive to L for a larger P (> 2). A strong relationship is observed between the flow regimes and the values of ${\bar{C}}_D$, $C_L{^{\prime}}$ and St. An increase in P affects the pressure distribution more on the top surface than on bottom surface while an increase in L does the opposite.

SOFC 스택 적용 마이크로웨이브-매트릭스 개질기 개발 (Development of Microwave-Matrix Reformer for Applying SOFC Stack)

  • 안준;전영남
    • 한국수소및신에너지학회논문집
    • /
    • 제32권6호
    • /
    • pp.534-541
    • /
    • 2021
  • In this study, a novel microwave-matrix reformer was proposed to convert CH4, which is a major component, to a high quality hydrogen energy. And to identify this performance, it was investigated for O2/C ratio, steam feed amount and reformed gas recirculation which are affected for methane conversion and product gas yield. Through the parametric screening studies, optimal operating conditions were that O2/C ratio, steam feed amount and recirculation rate were 1.1, 10 mL/min and 30 L/min. In this conditions, CH4 conversion was 68.1%, H2 selectivity 77.2 and H2/CO ratio 2.62 which are possible applying SOFC stack for RPG (residential power generator).