• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.59-60
• /
• 2009

대다수의 유량계는 특성상 공통구나 맨홀 등 일반적으로 사람의 눈에 잘 보이지 않는 곳에서 동작하는 경우가 많다. 따라서 아날로그 유량계의 경우 상태를 점검하기 위해 많은 불편함을 감수해야 하지만, 디지털 유량계를 도입하면 그러한 불편함을 줄일 수 있다. 디지털 유량계의 도입은 무선 기술을 결합할시 관리를 손쉽게 하는 등 유지보수성을 높일 수 있는데 그 역시 전력을 공급하는데 있어 배선관리 등의 문제점이 다시 발생하게 된다. 본 논문에서는 무선 센서네트워크(이하 USN) 기술을 융합하여 원하는 정보를 손쉽게 얻고 유지보수 비용을 낮추며 향후 다양한 활용을 가능케 하는 배터리 기반의 유량계 관리 시스템과 그 활용 방안을 제시한다.

• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.263-266
• /
• 2002

The KSR-III developed by KARI is the first rocket vehicle which is adopting the liquid propellant rocket engine system in Korea. Not only the engine itself, but also the propellant feeding system is one of the most important component in liquid rocket vehicle. In this paper, the authors are intended to introduce the multi-purpose test facility(PTA-II Test Facility) which is constructed for the variety of tests on KSR-III feeding system(single component tests, verification tests, cold flow tests and combustion tests). With the results of these tests, we can identify the characteristics of rocket feeding system and decide the optimum setting values of feeding system for the successful flight.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2007.04a
• /
• pp.78.2-78.2
• /
• 2007

• 한국초전도학회:학술대회논문집
• /
• v.10
• /
• pp.280-284
• /
• 2000

The prototype high-T$_c$ superconducting (HTS) power transmission cables have been designed and fabricated multi layers of spirally wound HTS tapes. The cables were made Bi-2223 based Ag-sheathed HTS tapes, and tested in LN$_2$. Critical currents of 700A dc and better were achieved. The magnetic flux density and field direction were analyzed in the cable configuration. In this paper the results of analysis and tests of HTS power transmission cables were described.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.233-236
• /
• 2006

A dilatometer was used to investigate the effect of cure conditions and the presence of filler in an epoxy system. These studies showed shrinkage in the cured epoxy when heating it through the glass transition temperature region. The magnitude of the shrinkage, related to stress build up in the epoxy during curing, was influenced by the processing conditions, filler presence and the nature of the mold used to contain the resin. Cure and cyclic cure at a lower temperature, prior to a post cure, decreased the magnitude of observed shrinkage. Cure shrinkage decreased with number of cyclic cure. Post cured samples outside the mold led to less shrinkage compared with sample in the mold. And sample containing kaolin filler showed less shrinkage than unfilled sample.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.03a
• /
• pp.605-610
• /
• 2001

There has been a steady increase in geoenvironmental engineering projects where geotechnical engineering has been combined with environmental concerns. Many of these projects involve some investigation on geoenvironmental characteristics related to waste landfill and waste soil. This study was carried out to evaluate the geoenvironmental properties of sorted soil from unregulated landfill wastes. The physical, mechanical, and environmental Properties of sorted soil were investigated for utilization in civil works.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.697-698
• /
• 2008

This paper deals with finite element characteristic analysis of brushless DC motor according to magnetic property measurement methods. Magnetic property data for non-oriented (NO) electrical steel for electric motors are measured by the Epstein test which is considered as the international standards. Data from Epstein test may result in discrepancy from motor characteristic tests due to innate anisotropic property of NO electrical steel. Finite element analysis were performed for a BLDC motor by various measurement methods such as Epstein test, Ring test and single sheet test (SST), and calculated results were compared with considering anisotropic property conditions.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.8 s.227
• /
• pp.1140-1151
• /
• 2004

This paper reports on the finite elements analysis for die compaction process of cemented carbide tool parts. Experimental data were obtained under die compaction and triaxial compression with various loading conditions. The elastoplastic constitutive equations based on the yield function of Shima and Oyane were implemented into an explicit finite element program (ABAQUS/Explicit) and implicit finite element program (PMsolver/Compaction-3D) to simulate compaction response of cemented carbide powder during die compaction. For simulation of die compaction, the material parameters for Shima and Oyane model were obtained by uniaxial die compaction test. Explicit finite element results were compared with implicit results for cemented carbide powder.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.11a
• /
• pp.1371-1374
• /
• 2005

지금까지 IEEE 802.11 WLAN 에서 많이 연구되어진 주제는 노드들 간의 공평성(fairness)과 처리량(throughput)을 높이는데 중점이 맞추어진 것들이 대부분이었다. 성능을 높이기 위한 AP의 CW값에 관한 연구는 노드들 간에 관한 연구에 비하여 비교적 적은 편이다. 지금은 노드들과 AP가 충돌하게 되면 BEB(Binary Exponential backoff)방식으로 셋팅되어 사용하게 있기 때문에 1:N의 불공평한(unfairness) 상황이 발생한다. AP에서 노드들로 가는 하향링크(downlink) 전송이 많은 상황에서 AP가 다른 노드들과 똑같은 채널 접근확률을 가지는 것은 바람직하지 않기 때문에 AP에게 우선권(priority)을 주어 전체 성능을 높이는 것이 필요하다. 따라서 본 논문에서는 AP의 CW(Contention Window)값이 변화함에 따라 전체 성능에 끼치는 영향과 노드 수의 변화에 따른 AP의 적절한 백오프 CW값을 분석해 보고자 한다.

• 대한예방의학회:학술대회논문집
• /
• 1996.10a
• /
• pp.203-204
• /
• 1996