• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.3
• /
• pp.248-255
• /
• 2009

After several damages by PWSCC were found in the world, USNRC and PNNL(Pacific Northwest National Laboratory) started the research on PWSCC under the project name of PINC. The aim of the project was 1) to fabricate representative NDE mock-ups with flaws to simulate PWSCCs, 2) to identify and quantitatively assess NDE methods for accurately detecting, sizing and characterizing PWSCCs, 3) to document the range of locations and morphologies of PWSCCs and 4) to incorporate results with other results of ongoing PWSCC research programs, as appropriate. Korea nuclear industries have also been participating in the project. Thermally and mechanically cracked-four mockups were prepared and phased array and manual ultrasonic testing(UT) techniques were applied. The results and lessons learned from the preliminary RRT are summarized as follows: 1) Korea RRT teams performed the RRT successfully. 2) Crack detection probability of the participating organizations was an average 87%, 80% and 80% respectively. 3) RMS error of the crack sizing showed comparatively good results. 4) The lessons learned may be helpful to perform the PINC RRT and PSI /ISI in Korea in the future.

• Korean Journal of Food Science and Technology
• /
• v.17 no.3
• /
• pp.175-179
• /
• 1985

The alkali refined rice bran oil (ARBO) and the esterified rice bran oil (ERBO) with glycerol were analyzed for their physicochemical charateristics and the compositions. Specific gravity, refractive index and yellowness of ERBO was higher than ARBO but smoking point was 60-$80^{\circ}C$ higher than ERBO. The free fatty acid content was 0.05% a ARBO and 0.88-1.36% ERBO. The wax was not detected in ARBO but the soft and hard waxes were detected in ERBO. The lipids were composed of 98-99% neutral lipid, 0.2-0.5% glycolipid and 0.1-0.5% of phospholipid in all samples. The triglyceride content of neutral lipid was 96.3% ARBO and 93.0-94.1% ERBO, and its monoglyceride content was 0.11% ARBO and 0.39-0.69% ERBO. The major fatty acid composition of samples were 41-42% oleic, 36-40% linoleic and 17-18% of palmitic acid.

• Korean Journal of Food Science and Technology
• /
• v.19 no.2
• /
• pp.176-180
• /
• 1987

The sorption characteristics of dried garlic flakes stored at various relative humidity and storage temperature were studied. At low relative humidity below RH 51%, the sorption equilibrium was easily attained, whereas at higher relative humidity above RH 67%, the flakes were browned by higher equilibrium moisture content. The flakes were browned at relative humidity above 67% at $20^{\circ}C$ and $35^{\circ}C$, above 84% at $5^{\circ}C$, respectively. The moisture contents of monolayer value for the flakes were ranging from 5.80% to 6.20% (DB) with varying temperatures. And the necessity of moisture-proof packaging material suggested for the long term storage of the flakes because the lower moisture content and storage temperature, the higher driving force of wetting. Regression equation for browning rate prediction with relative humidity and storage temperature of the flakes was determined.

• Polymer(Korea)
• /
• v.25 no.4
• /
• pp.568-574
• /
• 2001

PEO-like solid polymer electrolytes based on bisphenol A ethoxylate acrylate were synthesized and their electrochemical properties and mechanical stability were studied. Low molecular weight poly(ethylene glycol) dimethyl ether (PEGDMe) was added to increase the conductivity of the electrolyte. The maximum conductivity of the resulting polymer electrolyte was found to be 1.0 ${\times}$ 10$^{-3}$ S/cm [Bisphenol A ethoxylate diacrylate ([EO]/[phenol]= 15), PEGDMe250 80 wt%, LiCF$_3SO_3$] at 30$^{\circ}$C. Tensile strength of the free standing polymer electrolyte films was measured to be in the range of 0.4 ~ 5 MPa and these polymer electrolyte films did not show a crack even in 90$^{\circ}$ and 180$^{\circ}$ bending against ${\phi}$=3 mm bar. These electrolytes showed oxidation stability up to 4.5 V vs. lithium reference electrode.

• Korean Journal of Food Science and Technology
• /
• v.29 no.4
• /
• pp.680-686
• /
• 1997

Ultrafiltration and reverse osmosis were applied to produce soy-oligosaccharides from yeast fermented bean cooking water (BCW). The recovered total sugar by the ultrafiltration of bean cooking water on a cutoff molecular weight membrane of 20,000 and 5,000 was over 80%. The protein was removed up to 38% from the non-fermented BCW, 31% by S. cerevisiae KCTC 7039 and 21% by H. anomala KFRI 626. The recovery of oligosaccharides was above 70%, although fermented or non fermented bean cooking water was different on the recovery of oligosaccharides. The ultrafiltrated BCW was concentrated by reverse osmosis with respect to the volume concentration ratio (VCR). Total solid, total sugar, ash and protein contents increased up to VCR of 3.5 and then levelled off, showing that the optimum VCR was 3.5.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.6
• /
• pp.511-516
• /
• 2013

Objective: The objective of this study is designing an optimal hand tool through maximum grip force study accordance to the hand grip span. Background: In order to prevent musculoskeletal diseases, studies on hand tool design are proceeding based on grip strength, finger force, and contribution of individual finger force on total grip strength. However, experimental apparatus using a tool that is actually used in work place was almost non-existent. Method: 19 males were participated in an experiment. Using the load cell inserted real plier, finger force, grip strength, and subjective discomfort rate of both hands (dominant and non-dominant) were measured in 5 different hand grip span(45mm, 50mm, 60mm, 70mm, and 80mm). Results: There was significant difference(p<0.001) of total grip strength, individual finger force and subjective discomfort rating according to various hand grip span(45, 50, 60, 70, and 80mm). Also, statistically significant different(p<0.001) was shown between the dominant hand and non-dominant hand. In addition, individual finger force in maximum grip was in order of middle finger, ring finger, index finger, and little finger. Conclusion: Optimal grip span of pliers that exerting maximum grip strength is 50~60mm. Application: This finding is expected to be used for designing proper pliers.

• Journal of the Institute of Convergence Signal Processing
• /
• v.6 no.1
• /
• pp.27-32
• /
• 2005

As a large quantity of Genome sequencing has happened to be done a very much a surprising speed in short period, an automatic genome annotation process has become prerequisite. The most difficult process among with this kind of genome annotation works is to finding out the protein-coding genes within a genome. The main 2 subjects of gene prediction are Eukaryotes and Prokaryotes ; their genes have different structures, therefore, their gene prediction methods will also obviously varies. Until now, it is found that among of the 231 genome sequenced species, 200 have been found to be prokaryotes, therefore, for study of biotechnology studies, through comparative genomics, prokaryotes, rather than eukaryotes could may be more appropriate than eukaryotes. Even more, prokaryotes does not have the gene structure called an intron, so it makes the gene prediction easier. Former prokaryotes gene predictions have been shown to be 80%～ to 90% of accuracy. A recent study is aiming at 100% of gene prediction accuracy. In this paper, especially in the case of the E. coli K-12 and S. typhi genomes, gene prediction accuracy which showed 98.5% and 98.7% was more efficient than previous GLIMMER.

• Membrane and Water Treatment
• /
• v.13 no.1
• /
• pp.15-20
• /
• 2022

The continuous industrial growth increases the volume of pollutants discharged into the water, which induces Cyanobacteria in the receiving bodies. The removal of various cyanobacteria such as Microcystis, Anabaena, and Oscillatoria was explored to analyze their removal characteristics using different chemical and mineral coagulants. The chemical coagulants, including poly aluminium chloride (PACl), Alum, and mineral coagulants such as Loess and Illite, were tested to remove selected cyanobacteria. Results indicated that the removal rate increased with coagulant dosage regardless of the type of coagulant. The removal of selected cyanobacteria using chemical coagulant was found in the order: Microcystis > Anabaena > Oscillatoria. The PACl coagulant showed the most efficient removal rate for Microcystis, Anabaena, Oscillatoria. Removal rate of Microcystis conducted by PACl showed 92% at 100,000 cells/mL and 98.4% at 1,000,000 cells/mL whereas Illite showed lower 70% and Loess showed lower 50% in both 100,000 cells/mL and 1,000,000 cells/mL. The removal rate of Anabaena and Oscillatoria by PACl and Alum was higher 80%, while the other coagulants exhibited lower than 75% at 1,000,000 cells/mL. The removal rate of Oscillatoria by PACl was 80.1%, while the other coagulants exhibited lower than 70% at 1,000,000 cells/mL. Moreover, the mineral coagulants showed better removal efficiency at a higher concentration than low concentration during experiments. Therefore, removing cyanobacteria from water streams can be improved through coagulation by selecting a specific coagulant for a particular type of algae.

• Analytical Science and Technology
• /
• v.20 no.4
• /
• pp.289-295
• /
• 2007

A simple electric circuit of an infrared photodiode electrode (IPDE) was utilized to monitor iron using square-wave (SW) anodic stripping voltammetry (SV) and cyclic voltammetry (CV). The optimum analytical conditions were determined and were compared with those of common working electrodes. The comparison showed that CV is more sensitive and convenient to use than the common voltammetry methods. At the optimized conditions, the working ranges of 0.1- to 0.8- and 0.85- to 6.0 mg/L iron was obtained. Relative standard deviation of 15 measurements of iron (0.4 mg/L) was 0.09%. The analytical detection limit was found to be $80{\pm}0.6ug/L$, which was applied to iron in waste water.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5A
• /
• pp.447-456
• /
• 2009

The design comparison and flexural reliability analysis of continuous span composite plate girder bridges are performed. The girders are designed by the methods of allowable stress design (ASD) and load and resistance factor design (LRFD). For the LRFD design, the design specification under development mainly by KBRC, based on AASHTO-LRFD specification in case of steel structures, is applied with the newly proposed design live load which has been developed by analyzing domestic traffic statistics from highways and local roads. For the ASD based design, the current KHBDC code with DB-24 and DL-24 live loads is used. The longest span length for the 3-span continuous bridges with span arrangement ratio of 4:5:4 is assumed to be from 30 m to 80 m. The amount of steel, performance ratios, and governing design factors for the sections designed by the ASD and LRFD methods are compared. In the reliability analysis for the flexural failure of the sections designed by two methods, the statistical properties on flexural resistance based on the yield strength statistics for over 16,000 domestic structural steel samples are applied.