• 대한전자공학회논문지SD
• /
• 제47권3호
• /
• pp.51-57
• /
• 2010

IEEE 802.11n 기반 무선 LAN과 IEEE 802.16e 기반 Mobile WiMAX에 적용할 수 있는 이중모드 직접 변환 수신기를 $0.13\;{\mu}m$ RF CMOS 공정을 이용하여 설계하였다. 설계된 직접 변환 수신기는 2.3-2.7 GHz의 주파수 범위에서 동작을 한다. 저잡음 증폭기에 Current Steering 기술을 사용하여 전체 이득의 크기를 3 단계로 조절이 가능하게 하였다. 플리커 잡음 영향을 낮추기 위해 믹서에 Current Bleeding 기술을 사용하였다. 믹서 LO를 위한 I/Q 위상 신호 발생을 위해 주파수 2-분주회로를 포함하였다. 제작된 직접 변환 수신기는 1.4V의 공급 전원에서 LO 버퍼를 포함하여 56 mA를 사용하며, 32 dB의 전력이득과 4.8dB의 잡음지수, 그리고 +6 dBm의 출력 $P_{1dB}$를 가진다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.120-123
• /
• 2002

In this study it had an excellent optical characteristic, it followed in the creation rate and the refractive index regulation to the ease. Chalcogenide produced the $As_{45}Se_{45}Te_{10}$ thin film and the $MgF_{2}$ thin film. It measured thin film plan simulation, and the thin film has a 1 -dimensional photonic band gap. The chalcogenide $As_{45}Se_{45}Te_{10}$ thin film was measured with the fact that it has a high refractive index (2.6~2.9). The $As_{45}Se_{45}Te_{10}$ and $MgF_{2}$ thin film, have a high refractive index and a low refractive index, it used a simulation and planed period 5-pairs structure, the result was from 500nm to 800nm. It will be able to confirm the characteristic which most of the incidence light reflects, the He-Ne (632.8nm) laser was irradiated in the thin film which stabilized the thin film. $As_{45}Se_{45}Te_{10}$ (high refractive index layer: H) and $MgF_{2}$ (low refractive index layer: L) results which plans the thin film with glass/LHLHLLHLHL/air structure, 632.8nm against transmitance, increased a lot. An application possibility with the filter against a specific wave length was confirmed.

• 한국위성정보통신학회논문지
• /
• 제1권1호
• /
• pp.59-64
• /
• 2006

본 논문에서는 직접 변환 방식인 six-port의 RF 출력 신호를 검파하고 요구 대역폭에서 입력 주파수 신호에 대한 진폭 및 위상 신호를 선형적으로 출력하는 광역 power detector를 설계 제작한다. Six-port 출력단에 접속되는 power detector는 높은 정합도를 갖고 반사파로 인한 Six-port 간 위상 불일치를 방지하고, 넓은 대역폭에서 낮은 VSWR을 유지하여야 하는 광역 특성을 갖는 power detector 설계가 필요하다. 광역 정합을 위하여 사용 주파수 대역에 따라 강제 정합과 다단 LC 정합 회로, 그리고 isolator를 사용한 낮은 VSWR 특성을 갖는 설계 방법을 비교 분석한다. 설계 제작된 power detector의 주파수 대역에 대한 동적 동작 영역(dynamic range) 성능을 측정하여 Six-port의 수신 전송 신호 검파기로 활용될 수 있는 타당성을 평가한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.270-275
• /
• 2009

Sound absorption characteristics of membrane system which are used in stadiums and arenas were investigated. Theoretical studies on acoustic properties of single and double leaf permeable membrane conducted. Also, experimental studies on sound absorption characteristics of combined membrane system that is composed of outer and inner membrane material were conducted. In this study, sound absorption characteristics of each membrane were investigated by experiments in reverberation chamber. 4 types of permeable membranes and a non-permeable membrane were used for experiments. Air space behind membrane material and tension on the membrane was varied. Sound absorption performance of permeable membrane materials was confirmed. As increasing air space behind the membrane material, sound absorption coefficient was increased. In a resonance absorption frequency band sound absorption coefficient varied more dramatically. Sound absorption characteristics were flat in mid and high frequency range and sound absorption coefficient was from 0,3 to 0,5. Also sound absorption coefficient was increased by the increment of surface density and air permeability of membrane. However, over the certain value of air permeability, sound absorption coefficient was decreased. These results can be used as design factors and method for the room acoustic design of dome-stadiums and large free-form buildings.

• 전기학회논문지
• /
• 제62권11호
• /
• pp.1584-1589
• /
• 2013

A new and significantly small guided and resonant structure is suggested to take over bulky metallic hollow waveguides used in military satellite transceivers. Below Ku-band, the conventional waveguides resulting in quite heavy transceivers will be replaced by the low profile SIW(substrate integrated waveguide) structures that are distinguished from the others in that the suggested ones have much lower cut-off frequencies by the circuital configuration of DNG(dobule negative) constitutive parameters and become even smaller than the other SIWs. The design scheme is validated by the circuit and full-wave simulations from the guided, resonant, and coupled structures. Besides, a bandpass filter as the suggested coupled structure is fabricated with a cheap substrate in a low-budget fabrication process and its frequency response is measured as verification of the purpose of the design.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2078-2081
• /
• 2003

This paper presents the studies on prediction models of tropospheric scintillation. The prediction scintillation models are Karasawa and ITU-R , which can be improved for different locations and circumstances. In this paper, the investigation of average time between variance ${\sigma}_n\;^2$ and the wet part of refractivity $N_{wet}$ under various conditions of meteorological parameters have been carried out at King Mongkut’s Institute of Technology Lankrabang , Bangkok , Thailand , in the range of Ku-band (12.260 GHz) on high elevation angle from Thaicom2 satellite. From the studies results shows that average period of time of 30 days are best suitable for find out the relation between average time variance ${\sigma}_n\;^2$ and the wet part of refractivity $N_{wet}$ according to Karasawa model, the average time variance is express as ${\sigma}_n\;^2=(0.003N_{wet}-0.1313)^2$ , the appropriation model for occurrence of scintillation has been analyzed and experimental results are carried out.

• 한국군사과학기술학회지
• /
• 제23권5호
• /
• pp.459-465
• /
• 2020

In this paper, a compact antenna assembly for an amplitude comparison direction-finding(DF) method for a small flight vehicle is presented. Designed antenna assembly consists of four antennas and it is mounted on a radius of 1.45 λ_c where λ_c corresponds to the wavelength of the center frequency. To achieve compactness and robustness of the assembly, the elements are fed by end-launch feeding method and have modified aperture shapes of E- or H-sectoral horns. The feeding part consists of SMA connector, stepped impedance matching structure, and square waveguide of 0.6 λ_c × 0.6 λ_c. To achieve different main beam directions for every antenna which is required condition for amplitude comparison DF method, all apertures of the antennas are inclined and it makes the main beam direction of each antenna to top, bottom, left, and right with respect to the axis of the platform. To verify the validation of DF performance of the presented antenna assembly, amplitude comparison curves using measurement results are presented. The bandwidth of the antennas are above 3.2 % in Ku-band(VSWR ≤ 2:1).

• Bulletin of the Korean Chemical Society
• /
• 제33권3호
• /
• pp.1029-1036
• /
• 2012

Push-pull-type copolymers - low-band-gap copolymers of electron-rich fused-ring units (such as cyclopentadithiophene; CPDT) and electron-deficient units (such as benzothiadiazole; BT) - are promising donor materials for organic solar cells. Following a design principles proposed in our previous study, we investigate the electronic structure of a series of new CPDTBT derivatives with various electron-withdrawing groups using the time-dependent density functional theory and predict their power conversion efficiency from a newlydeveloped protocol using the Scharber diagram. Significantly improved efficiencies are expected for derivatives with carbonyl [C=O], carbonothioyl [C=S], dicyano [$C(CN)_2$] and dicyanomethylene [C=$C(CN)_2$] groups, but these polymers with no long alkyl side chain attached to them are likely to be insoluble in most organic solvents and inapplicable to low-cost solution processes. We thus devise several approaches to attach alkyl side chains to these polymers while keeping their high efficiencies.

• 전자공학회논문지
• /
• 제54권4호
• /
• pp.122-128
• /
• 2017

건설 중장비의 배선을 간소화하기 위하여 PLC(Power Line Communication)-CAN(Controller Area Network) 통신 모듈 연구가 활발히 진행되고 있다. PLC-CAN 통신 모듈이 개발되더라도 정상적인 동작여부를 판단할 수 있는 시뮬레이터가 필요하다. 본 논문에서는 PLC-CAN 통신 모듈의 상태를 측정할 수 있는 시뮬레이터를 설계 및 개발하였다. 시뮬레이터 개발을 위해 전력선로 특성 분석 및 중장비의 잡음을 측정하여 분석하였다. 전력선로 특성 분석을 통해 전력선 통신 주파수 대역에 대한 특성을 분석하였으며, 중장비 잡음 특성 파악을 위하여 일반 승용차와의 잡음 특성을 비교 분석하였다.

• Journal of electromagnetic engineering and science
• /
• 제5권1호
• /
• pp.8-13
• /
• 2005

The InGaP/GaAs hetero-junction bipolar transistor(HBT) monolithic voltage-controlled dielectric resonator oscillator(VCDRO) is first demonstrated for a Ku-band low noise block down-converter(LNB) system. The on-chip voltage control oscillator core employing base-collector(B-C) junction diodes is proposed for simpler frequency tuning and easy fabrication instead of the general off-chip varactor diodes. The fabricated VCDRO achieves a high output power of 6.45 to 5.31 dBm and a wide frequency tuning range of ]65 MHz( 1.53 $\%$) with a low phase noise of below -95dBc/Hz at 100 kHz offset and -115 dBc/Hz at ] MHz offset. A]so, the InGaP/GaAs HBT monolithic DRO with the same topology as the proposed VCDRO is fabricated to verify that the intrinsic low l/f noise of the HBT and the high Q of the DR contribute to the low phase noise performance. The fabricated DRO exhibits an output power of 1.33 dBm, and an extremely low phase noise of -109 dBc/Hz at 100 kHz and -131 dBc/Hz at ] MHz offset from the 10.75 GHz oscillation frequency.