• 복식
• /
• 제26권
• /
• pp.163-173
• /
• 1995

The purpose of this study is to investigate the Ku which was worn by nomadic tribes which was Khitai, Mongols and Manchus. The results of this study can be summarized as follows. 1. The fur clothes were very important clothes that nomadic tribes put on in order to protect them against the cold. The Ku was an outfit for protection against the cold. It was made of ani-mal fur and its style was tight sleeve and long dress. 2. The Ku was worn in all social classes including emperor, nobles and the masses in ancient China and Asia dynasty. After the nomadic tribes estabilished dynasty in China the style of Ku was changed. All kinds of animal fur was used to make the Ku but the volume of fur, kinds and colors were classified severely by their social position. In Khitai dynasty the Ku was worn in same style. But the emperor wore the Ku of silver marten. The noble class wore the Ku of purple, black and blue marten and silver squirrel skin. The masses wore the Ku of the other colors marten, sheep, squirrel and dessert fox skin. In Mongol dynasty, the emperor wore the Ku of purple marten, silver squirrel, silver fox and black fox skin. The nobles wore the Ku of the other colors marten and squirrel. The masses wore the Ku of degraded animal fur. Before the Manchus estabilished the varient races dynasty in China, the rich man preferred the Ku of marten, squirrel, fox, goat furs. But the poorman preferred the Ku of cow, horses, pig, sheep, cat, dog, snake and deer skin. After the manchus conquered the China, the manners of dress were changed. Generally the fur did not appear in right side of garment, but high quality or noble fur appeared outside. Sometimes the inside or outside of Ku was made of silk fabrics and sleeves, neck-band was made of the high quality fur.

• 전자공학회논문지A
• /
• 제31A권8호
• /
• pp.7-15
• /
• 1994

In this paper, the directional coupler for Ku-band, which is designed is of the crossguide type with a coupling value of about 3-dB. The apertures chosen for this design are crosses. We used polynomial approximations of rounded end slot to obtain the electric and magnetic polarizability of crossed-slot and compared the results with Cohn's experimental results. The optimized dimensions and positions of the cross aperture are obtained by a trial-and-error reiteration of the program. This paper presents the measurement results for the designed coupler. The very flat coupling shows a total variation of only 29.80$\pm$0.04dB for the design frequency ranges of 12.25GHz-12.75GHz. The measured minimum directivity is 25dB. The aperture attenuation for the finite diaphragm thickness is about 2dB pr 0.5mm, which is in agreement with the theoretical value. The transmission loss and input return loss at center frequency are 0.0564dB and 48.16dB respectively. We obtained the measured minimum directivity of the coupler. Whose apertures are both circles is better than that containing holes in the performance of directivity.

• 한국전자파학회논문지
• /
• 제19권12호
• /
• pp.1435-1444
• /
• 2008

본 논문에서는 짧은 천이길이를 갖는 감소단축도파관(redured-height waveguide) 대 마이크로스트립 모드 변환기(mode converter)를 설계하였다. 모드 변환기는 E-평면 프로브를 이용한 모드 변환기와 변형된 임피던스 변환기로 구성되어진다. E-평면 프로브를 이용한 모드 변환기는 50 ohm 릿지(ridge) 도파관의 릿지 상단에 단락된 프로브를 이용하여 설계하였다. 이 모드 변환기에 이용된 50 ohm 릿지 도파관과 감소단축도파관을 연결하기 위해 변형된 임피던스 변환기를 설계하였다. 이와 같이 구성된 전체 모드 변환기의 대역을 넓히기 위해, 두 구조의 결합도를 조정하였다. 저손실 및 Ku-대역 전체에서 동작하도록 구조를 최적화한 후 모드 변환기를 제작하였다 제작된 2개의 모드 변환기를 직접 연결(thru)한 S-파라미터와 모드 변환기 사이에 라인(line) 도파관을 삽입한 후 S-파라미터를 측정하였다. 측정된 2개의 S-파라미터를 이용하여 단일 모드 변환기의 성능을 추출하였다. 이렇게 추출된 모드 변환기의 성능은 커텍터 손실을 포함하고 있어, 커백터 손실을 측정하여 보상하였다. 모드변환기는 직각구조로 7.2 mm의 천이길이를 가지며, 중심 주파수에서 0.12 dB 삽입 손실과 Ku 전대역에서 10dB 이상의 반사 손실을 갖는 우수한 특성을 보였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.2034-2036
• /
• 2004

In this paper, a low noise amplifier (LNA) in receiver of Low Noise Block Down Converter (LNB) for direct broadcasting service (DBS) is implemented by using GaAs HEMT. The LNA is designed for operation between 10.7GHz-12.7GHz. The LNA consists of input, output matching circuits, DC-blocks and RF-chokes. Simulation result of the LNA shows that a noise figure is less than 1.4dB and a gain is greater than 9.2dB in the bandwidth of 10.7 to 12.7GHz with good flatness of 0.1dB.

• ETRI Journal
• /
• 제27권3호
• /
• pp.243-249
• /
• 2005

A mobile antenna for multimedia communications with Ku-band geostationary satellite KOREASAT-3 and JSAT-2A is presented. The forward link of the satellite communication is 11.7 to 12.75 GHz, and the return link is 14.0 to 14.5 GHz. The mobile antenna is designed to be a stair structure using 24 active phased array elements in order to provide a low profile, and to be at a non-periodic array distance using the genetic algorithm. Also, the designed antenna uses the double beam forming method for stable satellite tracking. The fabricated mobile antenna is examined using various experiments to confirm its capability for practical application. From the measured results, the fabricated mobile antenna system is confirmed to have a good performance.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2001년도 춘계학술발표대회 논문집
• /
• pp.13-18
• /
• 2001

This paper deals with finite element analysis for free vibration and forced sine vibration of Ka- and Ku- bend antenna structures using MSC/PATRAN/NASTRAN. The structures are designed to satisfy minimum resonance frequency requirement in order to decouple the dynamic interaction of the satellite with the spacecraft bus structure. From the forced sinusoidal vibration, we have observed output acceleration versus input in X-,Y- and Z- direction, based on base excitation using large mass method. The results of finite elements analysis can be used as the reference data for the experimental test of satellite antenna, resulting in the reduction of cost and time by predicting and complementing experimental data.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2002년도 하계학술대회 및 세미나
• /
• pp.31-34
• /
• 2002

본 논문은 Ku-band(12.4-18 GHz) 위성통신 시스템 및 이동통신 중계기용 송수신부에 사용되는 고안정도 전압제어 유전체 공진기(Voltage Controlled Dieletric Resonator Oscillator)의 설계 및 제작에 대해 논하였다. 유전체 공진기(Dielectric Resonator)의 등가회로 모델을 이용하여 유전체 공진 발진기(Dielectric Resonator Oscillator)를 설계 알고리즘화 하였다. 유전체 공진 발진기와 바렉터 다이오드를 이용하여 13.4 GHz의 전압 제어 유전체 공진 발진기를 제작하였다. 이때의 출력 전력은 +12dBm이고 위상잡음은 offset 주파수 100kHz에서 -105 dBc/Hz로 측정되었다.

• 전자공학회논문지A
• /
• 제32A권9호
• /
• pp.1229-1235
• /
• 1995

In this paper an elliptic response dual-mode 4-pole bandpass filter was designed, manu-factured, and tested. A dual-mode filter having two stages cascaded double-tuned cavities which are resonant in two independent orthogonal TE113 circular-cavity modes and provide a bandpass response. A 4-pole dual-mode elliptic function bandpass filter has a center frequency of 14.022 GHz with a bandwidth of 36 MHz which is the first channel of the KOREASAT up-link frequency. The measured experimental results of a dual-mode filter are 1 dB insertion loss in the passband and 20 dB out-of-rejection.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.100-103
• /
• 2003

A Ku-band Push-push VCO for low cost applications is proposed. The proposed push-push oscillator achieves a wide tuning range in Ku-band by the collector bias tuning instead of extra varactor diodes. The measurement shows a wide tuning range of 900MHz, fundamental suppression of -30dBc and good phase noise of -115dBc@1MHz offset.

• Transactions on Electrical and Electronic Materials
• /
• 제18권1호
• /
• pp.16-20
• /
• 2017

A RF-MEMS (radio-frequency microelectromechanical-system) based DPDT (double pole double throw) switch for the Ku band has been designed and analyzed for this article. The switch topology is based on the FG-CPW (finite ground-coplanar waveguide) configuration of a microstrip-transmission line. An FEM-based multiphysics solver is used for the evaluation of the spring constant, stress distribution, and pull-in voltage regarding the requirements of the switch-beam unit. The electromagnetic performance of the switch is investigated for a $675{\mu}m$ thick silicon substrate. For the operational frequency of 14.5 GHz, an insertion loss better than -0.3 dB, a return loss better than -40 dB, and input/output- and output-port isolations better than -35 dB are achieved for the switching unit.