• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.5 no.2
• /
• pp.38-41
• /
• 1999

This study was carried out to investigate improvement of kraft paper sack mixed with recycled paper for sugars and assorted feeds. Four Plies of kraft paper mixed with recycled paper(basis weight : $80g/m^2$) were taken place of two plies of kraft paper made from all pulp(basis weight : $98g/m^2$) and one ply of kraft paper mixed with recycled paper(basis weight : $80g/m^2$) for sugar 30kg. Three Plies of kraft paper mixed with recycled paper(basis weight : $80g/m^2$) were taken place of two plies of kraft paper made from all pulp(basis weight $98g/m^2$) for sugar 15kg and assorted feed 25kg. Physical properties, tensile strength, internal tearing strength and bursting strength, were improved by exchanging kraft paper mixed with recycled paper for kraft paper from all pulp and so kraft paper sacks made from all pulp were no damage in handling. They had so high friction coefficient that there was no danger of collapse on pallet by slipperiness in transportation and handling. And they had high printability so disappearance of printing by the contact with other paper sack in transportation was not found.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.331-336
• /
• 2004

Due to the outstanding insulating characteristics, Laminated Polypropylene paper (LPP) and Kraft paper have been used as ac power insulation for conventional cable. Recently, both of LPP and Kraft has been studied as main insulation fur high temperature superconducting (HTS) cable. Ifowever, studies on the use of LPP/Kraft paper for HTS cables are thinly scattered. In this paper, the comparison among LPP, Kraft and LPP/Kraft Samples impregnated with liquid nitrogen $(LN_2)$ on dielectric insulation characteristics was investigated. It was found from the experimental data that the breakdown strength becomes lower in the order LPP, Lpp/Kraft and Kraft but the lifetime indices n becomes lower in the order Kraft, LPP/Kraft, LPP. Moreover, partial discharge inception and dielectric loss tangent become lower in the order Kraft, LPP, LPP/Kraft.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.3
• /
• pp.74-80
• /
• 2005

The compositions of residual extractives in woodmeal, unbleached and oxygen-delignified aspen kraft pulps were investigated with gas chromatography(GC) and gas chromatography-mass spectrometry (GC-MS) with focus on fate of extractives in kraft pulping and oxygen delignification. Steryl esters and shorter retention time (shorter than palmitic acid) extractives were main extractives in aspen woodmeal. Shorter retention time extractives were well removed in kraft pulping. Sterol esters were hydrolyzed to sterols and fatty acids. Sterols and fatty acids were two major extractives classes in unbleached kraft pulps. Linoleic acid was main fatty acids in unbleached pulps compared with palmitic acid which is generally found in aspen woodmeal. Sterolsand fatty acids were also two major extractives classes in oxygen-delignified kraft pulps. However, linoleic acid was well removed in oxygen delignification.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.5
• /
• pp.20-25
• /
• 2009

Residual extractives had a noticeable impact on the brightness of unbleached hardwood kraft pulps (trembling aspen). The brightness-impacting extractives were effectively removed by oxygen delignification. In addition, oxygen delignification was more effective in removing chromophores in hardwood unbleached kraft pulps than in those of softwood (loblolly pine). The residual extractives in unbleached hardwood kraft pulps also affected the pulp color, primarily redness and the L value. These redness-related extractives in unbleached hardwood kraft pulps were also effectively removed by oxygen delignification. There were no significant color differences between untreated and solvent-extracted oxygen-delignified aspen kraft pulps. The residual extractives in unbleached and oxygen-delignified softwood (loblolly pine) kraft pulps did not have a significant impact on either brightness or pulp color.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.5 s.113
• /
• pp.41-49
• /
• 2005

This paper deals the effect of anthraquinone (AQ) on the contribution of sulphidity in kraft pulping of sapwood. The pulping conditions namely- active alkali concentration, pulpingtime, temperature and liquor ratio were varied in low ($15\%$) and high ($30\%$) sulphidity. $0.1\%$ AQ was added in the low and high sulphidity pulping with varying active alkali concentration and cooking time. At optimum conditions, low sulphidity kraft process produced about $44\%$ pulp yield with kappa number of about 23. But in high sulphidity kraft process kappa number was reduced to about 20 at the same yield. An addition of AQ reduced alkali requirement by $2\%$ on oven dried raw material and cooking time by 1 hour to produce pulp yield of about $44\%$ at kappa number 20. AQ is more effective in low sulphidity pulping than the high sulphidity pulping. The breaking length of kraft-AQ pulp was slightly higher than that of kraft pulp.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.42 no.3
• /
• pp.50-57
• /
• 2010

A mill trial was performed in a kraft paper mill in order to evaluate the possibility of utilizing dual polymer dry strength aids system consisting of cationic PVAm and anionic PAM. It was found that the cationic PVAm - anionic PAM dry strength additives can improve paper strength without significantly disturbing the stability of the kraft papermaking process when virgin UKP was used as a furnish. Tensile strength (25.3% in machine direction, 48.4% in cross machine direction), elongation of paper (31.6%, 15.6%) and tensile energy absorption (48%, 54%) were improved. Air permeability of the kraft paper was improved as well (22%). Tear strength was decreased with PVAm dry strength aids system, but it can be compensated with decreasing refining degree. In addition, the mill trial results indicate that highly air permeable kraft sack paper can be produced by the addition of PVAm dry strength agents at the stock with reduced freeness.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 1999.04b
• /
• pp.232-238
• /
• 1999

The reinforcement of wheat straw pulp sheets with softwood kraft was studied, with special emphasis on the impact of softwood kraft beating and the proportion softwood kraft in straw pulp. the reinforcement was evaluated by measuring the tensile stiffness sand in-plane fracture behavior of samples. the results were compared with a mechanical pulp (TMP) and with a hardwood birch kraft, both reinforced with the same softwood kraft. Wheat straw pulp forms strong interfiber bonds. Therefore, its tensile stiffness and tensile strength are larger than TMP used. In-plane tear tests showed that a pure wheat straw pulp sheet has low fracture energy and correspondingly a narrow fracture process zone. The fracture energy of the reinforced straw sheets was found to increase linearly with the proportion of both unbeaten and beaten softwood pulps.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.4
• /
• pp.16-20
• /
• 2013

Yellow poplar grown in Korea and imported eucalyptus were compared their kraft pulping characteristics and evaluated the replacing possibility of eucalyptus by yellow poplar. Difference between yellow poplar and eucalyptus were investigated in chemical composition and fiber morphology. Yellow poplar kraft pulp resulted in the higher yield, longer fiber length and thicker fiber, and higher pulp strength than that of eucalyptus. More xylan survived in eucalyptus than yellow poplar during kraft pulping, which led to similar pulp yield even though polysaccharides in Eucalyptus was 4.5% less than in yellow poplar. Longer and thicker yellow poplar pulp fiber resulted in better beating response and pulp strength properties.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.5
• /
• pp.104-110
• /
• 2006

We investigated why aspen extractives are more resistant in kraft pulping than pine extractives. Residual extractives content in aspen kraft pulps were 0.5~1.1% compared with 0.1~0.2% in pine pulps. This different response arises from the different composition of extractives in wood chips. Resin acids in pine were almost completely removed in kraft pulping but those are not existence in aspen. Slower saponification of aspen steryl esters resulted from different chemical structure of aspen steryl esters. Main sterols in aspen steryl esters were 24-methyl cyclolanostenol which was highly resistant to alkaline hydrolysis with its characteristic steric hindrance. Sterols in aspen were not well removed in kraft pulping. The relative composition of sterol in aspen kraft pulps was increased with increasing pulping time. The presence of fatty acids in aspen kraft pulps is considered to unusual. Fatty acids in alkaline are supposed to be well ionized and removed well in the washing stage. Nevertheless, there were significant amount of fatty acids remaining in aspen kraft pulps.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.05b
• /
• pp.87-93
• /
• 2004

Laminated Polypropylene Paper (LPP) and Kraft paper were used as ac power insulation for conventional cable as well as high temperature superconducting (HTS) cable because of its prominent insulating characteristics. However, researches on the use of LPP/Kraft paper in HTS cables are thinly scattered. In this paper, the effect of laminate polypropylene paper on the breakdown strength of LPP/Kraft multi-layer sample impregnated with liquid nitrogen (LN2)under ac and impulse applied voltage was studied. In addition, the breakdown strength characteristics of LPP and Kraft multi-layer sample were also investigated. It was found from the experimental data that the LPP has higher breakdown strength value than Kraft paper in ac and impulse. Especially in the ac case, the breakdown strength increases as the component ratio of LPP in the LPP/Kraftsample increases and slightly affected by the inserting position of LPP but in impulse case, the breakdown strength strongly depends on the number of LPP and the relative position of LPP.