• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.12
• /
• pp.2310-2316
• /
• 2016

We studied the effect of $Co^{60}$ gamma-radiation on the fiber Bragg gratings (FBGs) by irradiation time of UV Krypton fluoride (KrF) excimer laser among grating processing parameters. The FBGs were fabricated in a different UV laser irradiation time at 30, 60, 90, and 120 seconds using the same commercial Ge-doped silica core fiber (SMF-28e). It was exposed to gamma-radiation up to a high dose of 34.3 kGy at the dose rate of 106 Gy/min, and then it was analyzed radiation effects by measuring the radiation-induced change in the temperature sensitivity coefficient and Bragg wavelength shift. According to the experimental results, We confirmed that the UV laser irradiation period for grating inscription has a highly effect on the radiation sensitivity of the FBGs. The radiation-induced Bragg wavelength shift by the change of laser irradiation conditions showed a difference more than about 50 %.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.2
• /
• pp.72.2-72.2
• /
• 2010

The extremely metal-poor halo planetary nebula BoBn 1 has been investigated based on IUE archive data, Subaru/HDS spectra, VLT/UVES archive data, and Spitzer/IRS spectra. We have measured a heliocentric radial velocity of $+191.6\pm1.3\;kms^{-1}$ and expansion velocity 2Vexp of $40.5\pm3.3\;kms^{-1}$ from an average over 300 lines. The estimations of C, N, O, and Ne abundances from the optical recombination lines (ORLs) and Kr, Xe, and Ba from the collisional excitation lines (CELs) are also done. We have detected 5 fluorine and several slow neutron capture elements (the s-process). The amounts of [F/H], [Kr/H], and [Xe/H] suggest that BoBn 1 is the most F-rich among F detected PNe and is a heavy s-process element rich PN. The photo-ionization models built with non-LTE theoretical stellar atmospheres indicate that the progenitor was a 1-1.5 $M_\bigstar$ that would evolve into a white dwarf with an $0.62M_{\odot}$ core mass and $0.09M_{\odot}$ ionized nebula. Careful examination implies that BoBn 1 has evolved from a binary and experienced coalescence during the evolution to become a visible PN. The elemental abundances except N could be explained by a binary model composed of $0.75M_{\odot}+1.5M_{\odot}$ stars.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1994.04a
• /
• pp.170-170
• /
• 1994

항암제 KR 53170 및 관련 화합물의 항암 효과에 관한 연구의 일환으로 Phellinus linteus 균사배양물로부터 분리한 항암성 단백다당체 (분자량 8000 이상의 고분자 분획) PL-KP률 장내세균의 효소활성을 이용하여 부분분절(partial fragmentation)시킴으로써 항암력 증강 가능성을 검토하였다. 1. 장내세균을 이용한 PL-Kp의 처리 :PL-Kp 5.62g을 기본배지 281m1에 용해 시킨후 그 중 100m1에는 Py-92 균주(endoglucanase 생성균주)를, 다른 100m1에는 초식동물로부터 분리한 활성 균총을 접종한후 배양물 100m1 당 BH1 broth 10n1를 첨가하고 24시간 배양하였다. 배양물을 원심분리하여 그 상등액을 열탕에서 15분간 가열하고 투석, 동결건조하여 건조분말로 획득하였다. 이증 Py-92 균주로 처리한 시료를 Kp-F1, 균총으로 처리한 시료를 Kp-F2, 균을 접종하지 않고 처리한 시료를 Kp-FC라 한다. 2. 분절 (Fragmentation) 확인 : 증류수에 용해시킨 시료의 Sephadex G-25 컬럼을 이용한 gel filtration 유형(컬럼 통과 속도 및 착색대 유형)등을 관찰하여 Kp-F1 및 Kp-F2가 성공적으로 분절되었음을 확인하였다. 3. 분절 Kp의 항암력 실험 : ICR 마우스내 피하에 이식한 sarcoma 180고형암에 대한 항암력을 비교실험하여 부분분절에 의해 항암력이 증가 여부를 확인하였다. 그 결과 PL-Kp가100mg/kg/day ip의 용량에서 49.5%의 종양저지율을 발휘하였으나 균총을 이용하여 부분분절시킨 시료(Kp-F2)는 그 1/5용량에서도 87%의 종양저지율을 발휘하여 항암력이 현저히 증가 되었음을 확인하였다. 한편 Py-92 균주를 이용하여 분절시킨 Kp-F1도 100mg/kg용량에서 76%의 종양저지율을 나타내었다. 이로써 부분분절 조작을 통하여 항암성 단백다당류인 PL-Kp 의 항암력을 현저히 증가시킬 수 있음이 입증되었다.

• Archives of Pharmacal Research
• /
• v.29 no.5
• /
• pp.375-383
• /
• 2006

The anti platelet effects of a novel guanidine derivative, KR-32570 ([5-(2-methoxy-5-chlorophenyl) furan-2-ylcarbonyl]guanidine), were investigated with an emphasis on the mechanisms underlying its inhibition of collagen-induced platelet aggregation. KR-32570 significantly inhibited the aggregation of washed rabbit platelets induced by collagen $(10{\mu}g/mL)$, thrombin (0.05 U/mL), arachidonic acid $(100{\mu}M)$, a thromboxane (TX) $A_2$ mimetic agent U46619 (9,11-dideoxy-9,11-methanoepoxy-prostaglandin $F_2,\;1{\mu}M$) and a $Ca^{2+}$ ATPase inhibitor thapsigargin $(0.5{\mu}M)$ ($IC_{50}$ values: $13.8{\pm}1.8,\;26.3{\pm}1.2,\;8.5{\pm}0.9,\;4.3{\pm}1.7\;and\;49.8{\pm}1.4{\mu}M$, respectively). KR-32570 inhibited the collagen-induced liberation of $[^3H]$arachidonic acid from the platelets in a concentration dependent manner with complete inhibition being observed at $50{\mu}M$. The $TXA_2$ synthase assay showed that KR-32570 also inhibited the conversion of the substrate $PGH_2$ to $TXB_2$ at all concentrations. Furthermore, KR-32570 significantly inhibited the $[Ca^{2+}]_i$ mobilization induced by collagen at $50{\mu}M$, which is the concentration that completely inhibits platelet aggregation. KR-32570 also decreased the level of collagen $(10{\mu}g/mL)$induced secretion of serotonin from the dense-granule contents of platelets, and inhibited the NHE-1-mediated rabbit platelet swelling induced by intracellular acidification. These results suggest that the antiplatelet activity of KR-32570 against collagen-induced platelet aggregation is mediated mainly by inhibiting the release of arachidonic acid, $TXA_2$ synthase, the mobilization of cytosolic $Ca^{2+}$ and NHE-1.

• Korean Journal of Mathematics
• /
• v.25 no.2
• /
• pp.215-227
• /
• 2017

Let D be an integral domain with quotient field K, X be an indeterminate over D, K[X] be the polynomial ring over K, and $R=\{f{\in}K[X]{\mid}f(0){\in}D\}$; so R is a subring of K[X] containing D[X]. For $f=a_0+a_1X+{\cdots}+a_nX^n{\in}R$, let C(f) be the ideal of R generated by $a_0$, $a_1X$, ${\ldots}$, $a_nX^n$ and $N(H)=\{g{\in}R{\mid}C(g)_{\upsilon}=R\}$. In this paper, we study two rings $R_{N(H)}$ and $Kr(R,{\upsilon})=\{{\frac{f}{g}}{\mid}f,g{\in}R,\;g{\neq}0,{\text{ and }}C(f){\subseteq}C(g)_{\upsilon}\}$. We then use these two rings to give some examples which show that the results of [4] are the best generalizations of Nagata rings and Kronecker function rings to graded integral domains.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.11
• /
• pp.1546-1550
• /
• 2006

The purpose of this study was to assess the genetic variation and establish the relationship amongst breeds and strains using 15 chicken specific microsatellite markers. A total of 285 unrelated DNA samples from four Korean native chicken strains (Black strain of Korean native chicken; KL, Red Brown strain of Korean native chicken; KR, Ogol strain of Korean native chicken; KS and Yellow Brown strain of Korean native chicken; KY) and three introduced chicken breeds (F strain of White Leghorn; LF, K strain of White Leghorn; LK, Rhode Island Red; RC and Cornish; CN) were genotyped to estimate within and between breed genetic diversity indices. All the loci analyzed in 15 microsatellite markers showed a polymorphic pattern and the number of alleles ranged from 5 to 14. The polymorphism information content (PIC) of UMA1019 was the highest (0.872) and that of ADL0234 was the lowest (0.562). The expected total heterozygosity (He) within breed and mean number of observed alleles ranged from 0.540 (LF) to 0.689 (KY), and from 3.47 (LK) to 6.07 (KR), respectively. The genetic variation of KR and KY were the highest and the lowest within Korean native strains, respectively. The genetic distance results showed that Korean native chicken strains were separated with the three introduced chicken breeds clustered into another group. The lowest distance (0.149) was observed between the KR and KL breeds and the highest distance (0.855) between the KR and LK breeds. The microsatellite polymorphism data were shown to be useful for assessing the genetic relationship between Korean native strains and other foreign breeds.

• Applied Chemistry for Engineering
• /
• v.17 no.2
• /
• pp.158-162
• /
• 2006

Poly[4-hydroxystyrene-co-2-(4-methoxybutyl)-2-adamantyl methacrylate] was synthesized and evaluated as a matrix resin for extreme UV (EUV) chemically amplified resist. The resist system formulated with this polymer resolved 120 nm line and space (pitch 240 nm) positive patterns using a KrF excimer laser scanner (0.60 NA). The well defined 50 nm line positive patterns (pitch 180 nm) were obtained using an EUV lithography tool. The dry etching resistance of this resist for a $CF_{4}$-based plasma was 1.1 times better than that of poly(4-hydroxystyrene).

• Korean Journal of Optics and Photonics
• /
• v.7 no.3
• /
• pp.232-237
• /
• 1996

A 500 Hz repetition rate excimer laser was developed as light source for pollution lidar. In this paper, the high repetitive output characteristics, the gas flow loop structure, and CR(clearing ratio) characteristics were investigated. Our laser system was constructed compact structure with a streamline gas flow loop and UV preionization. The real gas volume of laser is 10 liter. At 500 Hz repetitive operation, we have obtained average power of 53 watt with KrF laser gas. The variation of laser output, CR, and active volume are $\pm$6.7%, 2.3, and 2.0(H)$\times$1.2(W)$\times$56(L)=134 ㎤, respectively. Laser output power is declined to half at 3$\times$$10^6$ shots.

• Journal of Advanced Marine Engineering and Technology
• /
• v.9 no.1
• /
• pp.61-73
• /
• 1985

The induction motor is widely used in the power equipments of the ship and the various industrial drive applications because it is robust and relatively simple and cheap to manufacture, but it has a disadvantage that the speed of induction motor is not controlled in wide range such as d.c motor. In this paper, the characteristics relating to the Kramer system that the speed of three phase wound type induction motor is controlled by changing the exciting e.m.f. of the secondary circuit is described. In order to analyze the characteristics, a new simplified and approximated T-type equivalent circuit from the Kramer circuit with three phase graetz connection and d.c machine is proposed. The stator current, motor torque and mechanical output power are computed by the current, torque and power equations derived by its equivalent circuit. Through the experiments, the $I_f-N$, torque-slip and current-slip characteristic curves of the tested motor are obtained and the various needed constants are determined. The numerical values obtained from the above method are compared with experimental values under the same conditions. As a result of the above investigation, it is found that the induction motor speed by the Kramer system is controlled by 28 per cent under the rated speed by changing the field current of d.c motor and the values computed by the current and torque equations derived by the simplified and approximated T-type equivalent circuit generally come to approach the experimental values.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.12
• /
• pp.13-20
• /
• 2004

Manufacturing process for the microfluidic device can include such sequential steps as master fabrication, electroforming, and injection molding. The laser ablation using masks has been applied to the fabrication of channels in microfluidic devices. In this study, manufacturing of polymer master and mold insert for micro injection molding was investigated. Ablation of PET (polyethylene terephthalate) by the excimer laser radiation could be used successfully to make three dimensional master fur nickel mold insert. The mechanism fur ablative decomposition of PET with KrF excimer laser $({\lambda}: 248 nm, pulse duration: 5 ns)$ was explained by photochemical process, while ablation mechanism of PMMA (polymethyl methacrylate) is dominated by photothermal process, the .eaction between PC (polycarbonate) and KrF excimer laser beam generate too much su.face debris. Thus, PET was adopted in polymer master for nickel mold insert. Nickel electroforming using laser ablated PET master was preferable for replication method. Finally, it was shown that excimer laser ablation can substitute for X-ray lithography of LIGA process in microstructuring.