• Journal of the Korean Wood Science and Technology
• /
• v.24 no.4
• /
• pp.40-46
• /
• 1996

It is well-known fact that dimensional stability of wood is greatly enhanced by acetylation of wood. This dimensional stability results from bulking of the reacted acetate within the cell wall, which reduces further swelling when the modified woods corne into contact with water or water vapor. The purpose of this research was to determine the water absorption and dimensional stability of the acetylated solid wood in liquid water and in humidity tests. Radiata pine, Siberian larch, and Japanese larch were acetylated. Antiswelling efficiency(ASE) and equilibrium moisture content(EMC) of acetylated wood, at 95% RH and $20^{\circ}C$ after 4weeks, was quite dependent on WPG, but was not dependent on species.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.6
• /
• pp.60-66
• /
• 2003

Mycelial growth of L. edodes by supplement nutrition of softwood was studied on a sawdust medium. The sawdust used was from the following softwood species : Larix leptolepis, Pinus densiflora and Pinus koraiensis. The added nutritions consisted of carbon nutritions(sucrose, active carbon, xylose, glucose, paper pellet), nitrogen nutritions(potassium nitrate, ammonium chloride, asparagine, glutamic acid) and vegetable oil(rice bran oil). The sawdust medium was a mixture of 76% sawdust, 20% rice bran, 3% carbon nutrition, 0.4% nitrogen nutrition and 0.6% calcium carbonate. Following addition of carbon and nitrogen nutritions on the sawdust medium proved most suitable : L. leptolepis (glucose, glutamic acid), P. densiflora (active carbon, asparagine) and P. koraiensis (xylose, glutamic acid). The highest mycelial growth was obtained from sawdust medium of optimum condition with 97% of L. leptolepis, 110% of P. densiflora and 98% of P. koraiensis. This study has provided useful preliminary information for the cultivation of L. edodes.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.4
• /
• pp.509-518
• /
• 2019

This study analyzed the effect of organic solvent extractives on the classification of wood species via near-infrared spectroscopy (NIR). In our previous research, five species of Korean softwood were classified into three groups (i.e., Cryptomeria japonica (cedar)/Chamaecyparis obtuse (cypress), Pinus densiflora (red pine)/Pinus koraiensis (Korean pine), and Larix kaempferi (Larch)) using an NIR-based principal component analysis method. Similar tendencies of extractive distribution were observed among the three groups in that study. Therefore, in this study, we qualitatively analyzed extractives extracted by an organic solvent and analyzed the NIR spectra in terms of the extractives' chemical structure and band assignment to determine their effect in more detail. Cedar/cypress showed a similar NIR spectra patterns by removing the extractives at 1695, 1724, and 2291 nm. D-pinitol, which was detected in cedar, contributed to that wavelength. Red pine/Korean pine showed spectra changes at 1616, 1695, 1681, 1705, 1724, 1731, 1765, 1780, and 2300 nm. Diterpenoids and fatty acid, which have a carboxylic group and an aliphatic double bond, contributed to that wavelength. Larch showed a catechin peak in gas chromatography and mass spectroscopy analysis, but it exhibited very small NIR spectra changes. The aromatic bond in larch seemed to have low sensitivity because of the 1st overtone of the O-H bond of the sawdust cellulose. The three groups sorted via NIR spectroscopy in the previous research showed quite different compositions of extractives, in accordance with the NIR band assignment. Thus, organic solvent extractives are expected to affect the classification of wood species using NIR spectroscopy.

• Journal of Korean Society of Forest Science
• /
• v.97 no.1
• /
• pp.45-52
• /
• 2008

The objectives of this study are to explain a supply plan of domestic softwood log by long-term prospect of MDF production to stably promote industry of MDF. For it, we developed the long supply function as Ordinary Least Squares Method. Between 2005 and 2050, it was estimated that quantity of domestic production of MDF increased from 1,653 thousand $m^3$ to 2,041 thousand $m^3$. In 2050, quantities of domestic softwood log used by raw materials to product MDF of 2,041 thousand $m^3$ were estimated to be used about 1,355 thousand $m^3$. Exampling Pinus rigida used presently by raw materials to product MDF, cutting area of it is estimated to be 10,828 ha per year. And larch is cutted about 9,160 ha per year. This study estimated annual softwood log cutting amount and total afforestation area at 2050 year by 3 scenarios which are 35%, 45% and 55% about use of domestic softwood log for MDF production. If we do a criterion of cutting area, we advantage to plant larch. But the species of trees are use and growth property. We think that the afforestation policy must be performed on the base of those to supply raw materials of MDF. Although government plans hardwood afforestation policy after cutting Pinus rigida, it needs to support and manage certainly afforestation area of softwoods to need to supply raw materials of MDF to stably promote industry of MDF.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.5
• /
• pp.462-470
• /
• 2021

To find out the wood species used in national wood structures in the late Joseon Dynasty, 11 volumes of Yeonggeon-Uigwes were reviewed. It was confirmed that the wood was mainly used for the repair and restoration of palaces, shrines, and fortresses. In the 17th to 20th centuries, the wood species specified in Yeonggeon-Uigwes have revealed either hardwood or softwood. As hardwood species, Juglans mandshurica, Zelkova serrata, Fraxinus rhynchophylla, Betula schmidtii, Paulownia coreana, or Quercus spp. (Quercus aliena; Q, variabilis; Q, dentata; Q, acutissima; Q, mongolica; Q, serrata) were used. As softwood species, Pinus densiflora and Pinus koraiensis were used. Investigation of the wood species is important part because the same species is required as a principle when reparing cultural heritage. In this study, the anatomical images of the wood species were investigated for some samples which were taken from the same species that has been stored in the wood specimen room of the National Institute of Forest Science, instead of the actual wood material used. It was possible to find out the wood species of each member in the wooden cultural heritage buildings by reviewing the Yeonggeon-Uigwes in the late Joseon Dynasty, and the anatomical images of the wood species required for determining the wood species in the repair or restoration of the buildings.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.4
• /
• pp.61-71
• /
• 2000

The effect of the treatment with CCFZ, FR-4, and PEG400 from butt end on the dimensional stability and bending properties was examined. Three softwood species such as red pine, Korean white pine and Japanese larch and three hardwood species such as poplar, alder and oak were investigated in this research. Shrinkage of red pine, Korean white pine, poplar, and alder treated with PEG400 decreased. However, there was no significant decrease of shrinkage in Japanese larch and oak. The decrease of shrinkage when moisture content changed from about 20% to 10% was larger than that at any other phase. In regard to the effect of treatment on bending properties, bending MOE and MOR of all specimens treated with PEG400 decreased significantly. Especially in the case of red pine, poplar, and alder treated with PEG400, bending MOR reduced 9%, 14%, and 12%, respectively. Reductions of MOR of the hardwood was also much larger than that of the softwood. However, in all species, treatment with CCFZ and FR-4 did not affect the change of bending MOE and MOR significantly. Comparing the large specimen which also included heartwood with the small specimen which included only treated sapwood, there was a difference in the change of bending MOE and MOR between them. The large specimens of Korean white pine, alder and Poplar, which had a relatively low proportion of sapwood(18~22%), showed the decrease of MOR by 11~13% more than that of small specimens, while red pine, Japanese larch and oak, which had a relatively high proportion of sapwood(35~40%), showed little decrease. It means that bending MOE and MOR of structural wood treated from butt end should be considered in terms of sapwood proportion as well as effect of treated chemicals.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.190-193
• /
• 1982

Conclusion: The results of this study are encouraging for the development of a set of interpretable diagnostic criteria for a reasonably reliable identification of some species. The present study has been limited in the characteristics studied and was made on relatively poor photography. Further study on high quality photography, over wider areas and including such additional characteristics as crown texture and shadow intensity should prove useful. A preliminary examination has been made of some photo-image characteristics of a number of important tree species on large scale (1:9,000) contact prints of panchromatic mm. The characteristics studied were crown image tone, and shape. Image tone was estimated against a standard grey-scale and shows within-species consistency and a range between species. Crown shapes were subjectively assessed but there appears to be a within-species consistency and interpretable between-species differences. The results of this trial suggest that it should be practicable to make a number of important species distinctions by photo-interpretation with a useful degree of reliability. Other characteristics beside those studied might be usefully examined. Photography: Hand-printed glossy contact prints of vertical 1:9,000 scale panchromatic photography of Kwangnung Experimental Forest flown May 1964. The filter used is unknown (probably minus-blue). The camera is unknown but was probably a military type K-17 or K-22 with 6"(apostfophy) lens. The photography shows notably poor resolution. Species: 143 individual trees ranging through 11 species (7 softwood, 4 hardwood) were included in the study. A range of size classes were included for each species.

• Journal of Wetlands Research
• /
• v.17 no.2
• /
• pp.124-129
• /
• 2015

In order to get as ecological basic data for river restoration, vegetation investigation was conducted in natural river and analysed it synecological methods, such as ordination cluster. 29 plant communities units were identified and the major dominant plant communites were Quercus mongolica community, Pinus densiflora community, Populus davidiana community, Q. variabilis community and Prunus sargentii community. River vegetations were classified into ravine and gorge forest type and riverine softwood forest type. Ravine and gorge forest was dominanted by hardwood which located in steep slope and in high elevation, and riverine softwood forest by softwood, salix spp. Naturality was an important criterion for the selection of rivers, so many of the selected rivers are located in the upper stream and mid stream rather than the lower stream, where more human intervention is involved. Plant communities were consisted of hardwood forest(44 plots, 92%) and softwood forest(4 plot, 8%), respectively. PCA with total layer data showed 5 groups of communities: Q. mongolica community group, Prunus sargentii community group, Pinus densiflora community group, Prunus sargentii community - Pinus densiflora community group and the rest communities group. PCA with tree layer showed 3 groups: Q. mongolica community group, Prunus sargentii community group, and the rest community group. Cluster analysis also a showed a similar communities group to PCA ordination, but Magnolia sieboldii community and Prunus sargentii community were distinguished from the PCA result. From the result, it can be concluded that the plant communities of riparian be divided into hardwood and softwood forest by statistical techniques. It was appropriate to plant species such as Quercus mongolica, Pinus densiflora, Populus davidiana, Quercus variabilis and Prunus sargentii, at levee zone and high water level. And Sliax spp. were appropriate for planted plants at waterfront and low water level. The herb species to be planted on the floodplain were recommanded in the species composition co-occurred with the woody species.

• Journal of the Korea Furniture Society
• /
• v.19 no.3
• /
• pp.156-162
• /
• 2008

Three major domestic softwoods, Korean red pine, Korean pine and larch, were heat-treated at $220^{\circ}C$ and for various treatment times for color changing. A new heat treatment equipment was developed for this study and was revealed working well for changing the colors of the three softwoods. The color difference index of 15 was obtained after 8 hours for Korean red pine and Korean pine, and 10 hours for Larch. The correlations of brightness, redness and yellowness with treatment time were different between species.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.2 s.130
• /
• pp.1-7
• /
• 2005

Tree species of wooden structural members of the Beomeo Temple were identified based on light and scanning electron microscopic characters in the present study. Of 10 structural members, 9 softwoods and 1 hardwood were identified. Among softwood members, 7 belonged to hard pine of the Sylvestris section, and the remaining 2 to hard pine of other than the Sylvestris section and hemlock of the genus Tsuga, respectively. A single hardwood member was identified as white oak of the Prinus section under the subgenus Lepidobalanus.