• Atmosphere
• /
• v.20 no.2
• /
• pp.173-186
• /
• 2010

The impact of the precipitation has been focused on losses in social and economical sectors. However, as growing the concerns of the future water shortage caused by the climate change, the precipitation should be consider in various views for an effective planning in the water resource management. A precipitation case occurred from 20 to 21 April 2009 was recorded as a welcome rain because it reduced the severe drought continued in Korea from winter season of 2008. In this study, economic values of the event was calculated with positive aspects in various sectors. The estimation is based on four major parts such as a secure of water resources, the improvement of air quality, the decrease of forest fires, and the reduction of the drought impact. The water resources only considered inflow waters into dams and the reservoirs managed by Korean public institutions and their economic values accounts for 5.92 billion won. Decreases of four air pollutants($PM_{10}$, $NO_2$, CO, and $SO_2$) were considered as the positive effects of the rainfall and estimated 175.4 billion won. The preventive effect of the forest fire after the rainfall results in 0.48 billion won. Finally, the rainfall during the drought period is effective to reduce the social costs of 108.65 billion won. Although the economic values estimated in this study explain parts of the positive effects of the precipitation, it can help to develop a comprehensive and systematic valuation system for the whole process of the precipitation. For doing this, various rainfall types should be analyzed in social-economic terms including economics, environments and hydrology.

• Journal of Ginseng Research
• /
• v.38 no.3
• /
• pp.187-193
• /
• 2014

Background: White ginseng (Panax ginseng Meyer) is commonly distributed as a health food in food markets. However, there is no practical method for distinguishing Korean white ginseng (KWG) from Chinese white ginseng (CWG), except for relying on the traceability system in the market. Methods: Ultra-performance liquid chromatography quadrupole time-of-flight mass spectrometry combined with orthogonal partial least squares discrimination analysis (OPLS-DA) was employed to discriminate between KWG and CWG. Results: The origins of white ginsengs in two test sets ($1.0{\mu}L$ and $0.2{\mu}L$ injections) could be successfully discriminated by the OPLS-DA analysis. From OPLS-DA S-plots, KWG exhibited tentative markers derived from ginsenoside Rf and notoginsenoside R3 isomer, whereas CWG exhibited tentative markers derived from ginsenoside Ro and chikusetsusaponin Iva. Conclusion: Results suggest that ultra-performance liquid chromatography quadrupole time-of-flight mass spectrometry coupled with OPLS-DA is an efficient tool for identifying the difference between the geographical origins of white ginsengs.

• Journal of Korean Academy of Nursing
• /
• v.50 no.4
• /
• pp.513-522
• /
• 2020

Purpose: This study aimed to utilize concept analysis to obtain a better understanding of the concept of "continuity of care" in chronic diseases. Methods: The concept of continuity of care was analyzed using the Walker and Avant method. Covering literature in English from 1930 to 2018, the data sources included CINAHL Complete, Academic Search Complete, MEDLINE, PsyARTICLES, Health Source: Nursing/Academic Edition, Google Scholar, Science Direct, and the Cochrane Library. Results: A comprehensive definition of concept of continuity of care was developed based on a systematic search and synthesis. The key defining attributes were identified as (a) care over time, (b) the relationship between an individual patient and a care team, (c) information transfer, (d) coordination, and (e) meeting changing needs. The antecedents of continuity of care were having a chronic disease, inexperienced with disease management, a poorly coordinated healthcare system, and medical care limitations. The consequences of continuity of care were decreasing hospital admissions, reducing costs, reducing emergency room visits, improving the quality of life, improving patient satisfaction, and delivering good healthcare. Conclusion: The thorough concept analysis provides insight into the nature of "continuity of care" in chronic diseases and also helps ground the concept in healthcare.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.6
• /
• pp.561-569
• /
• 2008

Currently, satellite image, aerial image and airborne laser scanning data are mostly used to build 3D image models. However, we are in need of quality 3D image models as current models cannot express topographic and features most elaborately and realistically. When making 3D image models, the model is first built and textures from terrestrial photos are applied to add realistic features to the model. This study analyzed techniques to use photogrammetry and laser scanning data to create a 3D image models with topography, building and statue that emphasize spatial accuracy, delicate depiction and photo-realistic imaging. 3D image models with spatial accuracy and photographic texture were built to be served via 3D image map services systems on the internet. The 3D image models can be used for various purposes, such as daylight and view right analysis, landscape analysis, facility management system.

• Journal of Environmental Science International
• /
• v.29 no.3
• /
• pp.307-318
• /
• 2020

The integrated permit system is applied to class 1 and 2 atmospheric and water pollutant discharge facilities in 19 sectors. The fertilizer sector should receive a permit for a period of four years, from 2019 to 2023. The purpose of this study is to investigate the differences between the Korean Best Available Techniques (BAT) reference document (K-BREF) and the European Union BAT reference document (EU-BREF) in terms of the process and emission characteristics of fertilizer manufacture. K-BREF is written by focusing on products, whereas EU-BREF is produced on focusing on manufacture process. There are five types of BATs(best available techniques economically achievable) in Korea. These BATs selected mainly to recover and reuse raw meterials and save energy. The number of BATs and BAT-AELs(BAT associated emission level) in K-BREF is smaller than that in EU-BREF. We suggest that BATs and those environmental management parameters in Korea need to further reflect the emission characteristics in the fertilizer sector.

• Journal of Korean Society of Forest Science
• /
• v.99 no.4
• /
• pp.580-589
• /
• 2010

In Korea, Public demand for quality of life is increasing gradually with socioeconomic growth. It is really necessary urban forestry because urban forest is one of the important factors in citizen's living environment. There is expected to participate government, citizen, NGOs and the corporate sector in urban forestry. This study was investigated the directions of environmental governance in urban forestry focused local government. As a result, urban forestry official recognized the importance of urban forestry by partnership. In order to manage urban forest efficiently, the committee must be comprised of various stakeholder and researcher have need to develop support system for management. Especially, it shows that they prefer corporations participate to create and manage urban forest.

• Journal of Korean Society of Water and Wastewater
• /
• v.30 no.6
• /
• pp.707-714
• /
• 2016

In order to prevent secondary pollution of tap water, corrosion characteristics are investigated, and corrosion index are calculated using LI and LR to manage corrosiveness. As targeted water treatment plants from 2014 (July, once) to 2015 (July and October, 2 times), 70 plants are selected by making a division for each area and water system. (treated water samples, n=240, raw water samples, n=72). In result of pH analysis, treated water was lower than raw water to 7.12, and 7.29, respectively. LI were investigated in the order of Seomjin river, Nakdong river, Han river, Geum river, to -2.08, -1.24, -1.11, -1.10 (at raw water), and -2.18, -1.59, -1.51, -1.35 (at treated water), respectively. In case of water quality goal value (LI = -1) in Japan as control of corrosiveness, management object was investigated about 83.3%.

• Korean Journal of Medicinal Crop Science
• /
• v.25 no.4
• /
• pp.238-243
• /
• 2017

Background: The production method of ginseng seedlings for ginseng cultivation is very important to ensure healthy rooting system as well as high quality, and yield of the resultant plants. This study was carried out to compare the growth characteristics of 2-year-old ginseng plants that were produced from seedlings grown in self soil nursery (SSN), nursery soil (NS) or hydroponic culture (HC). Methods and Results: The shading prop used was composed of four-layered 4 polyethylene (blue 3 + black 1) shade screen. The management of main field was done by inserting oil cake (1,200 kg/10 a) and then allowing Sudan grass to grow for a year. Seedling transplantation was carried out on April 6. Root growth was measured on October 25. Root weight was observed to be excellent at 6.0 g, following SSN transplantation. Root length was 21.2 cm for HC seedlings, but these plants had a physiological disorder (i.e., rusty root), in 83.5% plants of this treatment. The ratio of PD/PT (protopanaxadiol saponins / protopanaxatriol saponins) was higher in NS seedlings. Plant analysis revealed that Fe content was lower in HC seedlings with high rustiness. The growth of 2-years-old ginseng was different following these varying seedling cultivation methods, but seedlings from NS were not different from those grown in SSN. Conclusions: For the propagation of 2-year-old ginseng plants, NS seedlings may be a good substitute for SSN seedlings.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.4_2
• /
• pp.617-626
• /
• 2020

The drilling mud is essentially used in oil and gas development. There are several roles of using the drilling mud, such as cleaning the bottomhole, cooling and lubricating the drill bit and string, transporting the cuttings to the surface, keeping and adjusting the wellbore pressure, and preventing the collapse of the wellbore. The fragments from rocks and micro-sized bubbles generated by the high pressure are mixed in the drilling mud. The systems to separate those mixtures and to keep the uniformly maintained quality of drilling mud are required. In this study, the simulation is conducted to verify the performance of the mud tank's agitation capacity. The primary role of the mud tank is the mixing of mud at the surface with controlling the mud condition. The container type is chosen as a mud tank pursuing efficient transport and better management of equipment. The single- and two-phase simulations about the agitation in the mud tank are performed to analyze and identify the inner flow behavior. The convergence of results is obtained for the vertical- and axis-direction velocity vector fields based on the grid-dependency tests. The mixing time analysis depending on the multiphase flow conditions indicates that the utilization of a two-stepped impeller with a smaller size provides less time for mixing. This study's results are expected to be utilized as the preliminary data to develop the mixing and integrating equipment of the onshore drilling mud system.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.46 no.2
• /
• pp.173-183
• /
• 2010

In a split beam echo sounder, the transducer design needs to have minimal side lobes because the angular position and level of the side lobes establishes the usable signal level and phase angle limits for determining target strength. In order to suppress effectively the generation of unwanted side lobes in the directivity pattern of split beam transducer, the spacing and size of the transducer elements need to be controlled less than half of a wavelength. With this purpose, a 50 kHz tonpilz type transducer with a half-wavelength diameter in relation to the development of a split beam transducer was designed using the equivalent circuit model, and the underwater performance characteristics were measured and analyzed. From the in-air and in-water impedance responses, the measured value of the electro-acoustic conversion efficiency for the designed transducer was 51.6%. A maximum transmitting voltage response (TVR) value of 172.25dB re $1{\mu}Pa/V$ at 1m was achieved at 52.92kHz with a specially designed matching network and the quality factor was 10.3 with the transmitting bandwidth of 5.14kHz. A maximum receiving sensitivity (SRT) of -183.57dB re $1V/{\mu}Pa$ was measured at 51.45kHz and the receiving bandwidth at -3dB was 1.71kHz. These results suggest that the designed tonpilz type transducer can be effectively used in the development of a split beam transducer for a 50kHz fish sizing echo sounder.