• Korean Journal of Organic Agriculture
• /
• v.22 no.3
• /
• pp.457-468
• /
• 2014

This study was conducted to investigate the effect of mixed-sowing of legume forage and applying of cattle manure on the productivity of rye in order to produce the organic roughage to be effectively reducing the environmental contamination and to provide Hanwoo rearing farmer with safe organic animal products. The present study also aimed to evaluate optimal applying level of cattle manure and carrying capacity of Korean native cattle (Hanwoo) per unit area. The annual amount of crude protein (CP) of rye in Gyeongju were higher than those of in Gyeongsan and Yeongju, and the mixed-sowing of forage pea was the highest (p<0.05) compared with the single-sowing. The amount of CP were increased proportionately corresponded to the applying level of fermented cattle manure, and found significantly (p<0.05) high at the level of 100 and 150 kg/ha groups. With feed value of forage, CP was tended to be higher in the mixed-sowing of legume than the single-sowing of rye at the wintering experimental sites of legume, and in particular the forage peas was higher (p<0.05) than other crops. Carrying capacity of organic Hanwoo (head/ha) was higher (p<0.05) in Gyeongju (3.28 head) than that in Gyeongsan (1.94) and Yeongju (1.50). The carrying capacity in the single-sowing of rye also was lower than that in the mixed-sowing of legume, and the forage peas was the highest among the mixed-sowing groups (p<0.05). Overall, the present results showed that it would be recommended to take into account the wintering for mix-sowing of legume. The fermented cattle manure may be applied for legume in the wintering unavailable regions. In addition, the applying the fermented cattle manure at the level of 100~150kg/ha and the mix-sowing of legume with forage peas may increase the productivity per unit area and feed value including CP for improving carrying capacity of organic Hanwoo.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.30 no.1
• /
• pp.43-48
• /
• 2010

This study was conducted to compare the chemical composition, dry matter digestibility (DMD), dry matter intake, and utilization of nitrogen and energy of dairy goats (Saanen), when fed on imported timothy hay (IT), mixture grass hay (MG) and native grass hay (NG), respectively. The experimental trials were conducted from April, 2008 to December, 2008 at the environmental controlled barn of Chungnam National University. Twelve dairy goats (Saanen) were selected which had nearly the same body weight (24.2kg, male). The content of crude protein (CP) of MG hay was higher than that of other diets (p<0.05), but the contents of NDF, ADF, cellulose and lignin of IT and NG diet were higher than those of MG diet (p<0.05). The voluntary DM intake of dairy goats fed with herbage from MG diet (30.7/$BW_{kg}$/day) was higher than that of other diets, but no significant difference was observed between that of IT diet and NG diet (p>0.05). The DMD of MG diet (69.8%) was higher than that of NG diet (62.2%) and IT diet (60.8%) (p<0.05), but no significant difference was observed between that of IT diet and NG diet (p>0.05). In nitrogen utilization, the apparently digested N %, retained % and biological value of dairy goats fed with herbage from MG diet were higher and TG diet was lower (p<0.05). In energy utilization, digestible energy and the energy of apparently digested minus urinary losses of MG diet were higher than those of IT diet and NG diet (p<0.05), but no significant difference was found between IT diet and NG diet (p>0.05). Based on the results, the dry matter intake, DMD and utilization of nitrogen and energy of dairy goats of MG were higher than those of IT diet and NG diet (p<0.05), the DMD and biological value (%) of NG diet was higher than that of IT diet (p<0.05).

• Korean Journal of Agricultural Science
• /
• v.10 no.2
• /
• pp.334-344
• /
• 1983

This study was conducted to investigate the variables affecting the performance of hammer mills by the theoretical and dimensional analysis, and evaluate the power requirements of hammer mills for farm use in Korea. From the theoretical analysis, 16 variables affecting the performance of hammer mills were defined. In order to develop the mathematical relationships among the variables, the dimensional analysis was made for power requirements and $12{\pi}$ parameters were obtained. For the evaluation of the power requirements of hammer mills, approximate rates of grinding for 1HP, 3HP, 5HP, 6HP, 8HP, and 10HP were analyzed. Then, the fineness of grinding recommendation and average feeding rate of grain for livestock which is native cattle, dairy cattle, beef cattle, swine, broilers, and layers, were estimated. Finally number of livestock feeding shelled corn and barley were estimated from the above for one hour's hammer mill operation having the various power requirements. From this study it is known that 5HP is considered as an enough power for feed grinding of any kinds of livestock of Korean farm, as far as the grinding capacity is concerned.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.1
• /
• pp.85-97
• /
• 2007

Statement of problem: Recently, anodic oxidation of cp-titanium is a popular method for treatment of titanium implant surfaces. It is a relatively easy process, and the thickness, structure, composition, and the microstructure of the oxide layer can be variably modified. Moreover the biological properties of the oxide layer can be controlled. Purpose: In this study, the roughness, microstructure, crystal structure of the variously treated groups (current, voltage, frequency, electrolyte, thermal treatment) were evaluated. And the specimens were soaked in simulated body fluid (SBF) to evaluate the effects of the surface characteristics and the oxide layers on the bioactivity of the specimens which were directly related to bone formation and integration. Materials and methods: Surface treatments consisted of either anodization or anodization followed thermal treatment. Specimens were divided into seven groups, depending on their anodizing treatment conditions: constant current mode (350V for group 2), constant voltage mode (155V for group 3), 60 Hz pulse series (230V for group 4, 300V for group 5), and 1000 Hz pulse series (400V for group 6, 460V for group 7). Non-treated native surfaces were used as controls (group 1). In addition, for the purpose of evaluating the effects of thermal treatment, each group was heat treated by elevating the temperature by $5^{\circ}C$ per minute until $600^{\circ}C$ for 1 hour, and then bench cured. Using scanning electron microscope (SEM), porous oxide layers were observed on treated surfaces. The crystal structures and phases of titania were identified by thin-film x-ray diffractmeter (TF-XRD). Atomic force microscope (AFM) was used for roughness measurement (Sa, Sq). To evaluate bioactivity of modified titanium surfaces, each group was soaked in SBF for 168 hours (1 week), and then changed surface characteristics were analyzed by SEM and TF-XRD. Results: On basis of our findings, we concluded the following results. 1. Most groups showed morphologically porous structures. Except group 2, all groups showed fine to coarse convex structures, and the groups with superior quantity of oxide products showed superior morphology. 2. As a result of combined anodization and thermal treatment, there were no effects on composition of crystalline structure. But, heat treatment influenced the quantity of formation of the oxide products (rutile / anatase). 3. Roughness decreased in the order of groups 7,5,2,3,6,4,1 and there was statistical difference between group 7 and the others (p<0.05), but group 7 did not show any bioactivity within a week. 4. In groups that implanted ions (Ca/P) on the oxide layer through current and voltage control, showed superior morphology, and oxide products, but did not express any bioactivity within a week. 5. In group 3, the oxide layer was uniformly organized with rutile, with almost no titanium peak. And there were abnormally more [101] orientations of rutile crystalline structure, and bonelike apatite formation could be seen around these crystalline structures. Conclusion: As a result of control of various factors in anodization (current, voltage, frequency, electrolytes, thermal treatment), the surface morphology, micro-porosity, the 2nd phase formation, crystalline structure, thickness of the oxide layer could be modified. And even more, the bioactivity of the specimens in vitro could be induced. Thus anodic oxidation can be considered as an excellent surface treatment method that will able to not only control the physical properties but enhance the biological characteristics of the oxide layer. Furthermore, it is recommended in near future animal research to prove these results.

• Korean Journal of Ecology and Environment
• /
• v.42 no.3
• /
• pp.350-363
• /
• 2009

Inter- and intra-specific differences in removal activities, filtering rates (FR) and production of feces-and pseudo-feces (PF) between a native freshwater bivalve in Korea, Anodonta woodiana Lea and Unio douglasiae Griffith et Pidgeon, were compared using a continuous removal of organic matters (CROM) system. The CROM system comprised five steps; input of polluted water, control of water flow, mussel treatment, analysis of water quality and discharge of clean water. The study was designed to compare the removal activity of organic matters between A. woodiana and U. douglasiae, and the intra-specific differences between density and length in A. woordiana. Results clearly indicate that two kinds of mussels had obvious removal activities of seston in the eutrophic reservoir. First, if both are similar in shell length, there were no significant inter-specific differences in removal activity between A. woordiana and U. douglasiae (P>0.5), but FRs of U. douglasiae was relatively high due to low ash-fee dry weight. Second, if both are same in animal density, the smaller mussels (1$\sim$2 years old) showed a higher filtering rate and production of feces- and pseudo-feces and less release of ammonium than the larger mussels. Third, if both are same in biomass, FRs and PF of mussels were higher in the low-density tank than the high-density tank, While the Concentration of $NH_4$-N and $PO_4$-P released WRS similar to each other (P>0.5). Therefore, these results suggest that CROM system using a young bivalve A. woordiana can be applied to control the nuisance seston in eutrophic lake system, if a relevant species and density were selected. Additional pilot tests to optimize the age and density of domestic bivalves were needed for the generalization of CROM operation.

• Reproductive and Developmental Biology
• /
• v.28 no.2
• /
• pp.127-132
• /
• 2004

This study was conducted to examine the effects of electric stimulation conditions on in vitro developmental ability of caprine embryos after somatic cell nuclear transfer. Recipient oocytes were surgically collected after superovulation by using CIDR and FSH, PMSG, hCG and estrous synchronization in Korean native goats. The caprine ear cells were cultured in vitro in serum-starvation condition (TCM-l99 + 0.5% FBS) for 3 to 5 days of cell confluence. The zona pellucida of in vivo and in vitro matured oocytes were partially drilled using laser system. Single somatic cell was individually transferred into the enucleated oocyte. The reconstructed oocytes were electrically fused with 0.3M mannitol. After the electofusion, embryos were activated by electric stimulation or Ionomycin + 6-DMAP. Nuclear transfer embryos were cultured in mSOF medium supplemented with 0.8% BSA 6∼7 days at 39 , 5% $CO_2$, 5% $O_2$, 90% $N_2$. The fusion rate of donor cells was 60.4% and 40.3 % in ear cell and fetal fibroblast, and cleavage rate were 40.6% and 48.2%, respectively. No significant difference was found in the fusion and cleavage rate in different donor cells. Nuclear transferred oocytes were fused by electric pulses of 1.30∼1.40, 2.30∼2.39 and 2.40∼2.46 ㎸/cm. There was no significant difference among different electric pulses in fusion rates (26.7, 34.8 and 43.8%). The cleavage rate was higher (p<0.05) in 1.30∼1.40 ㎸/cm (82.9%) than 2.30∼2.39 ㎸/cm (43.8%) and 2.40∼2.46 ㎸/cm. (51.8%). The fusion rates of recipient oocyte source were 1st (43.5% and 23.6%), 2nd (55.7％ and 39.2%) and 3rd (66.1% and 52.8%) in in vivo and in vitro oocytes. However, fusion ratee were significantly higher (p<0.05) in in vivo than in vitro oocyte. The cleavage rate of fused oocytes from in vivo and in vitro sources were 52.6% and 54.4%, respectively. No significant difference was found in the cleavage rate according to the recipient oocyte source. These results suggest that factors such as field pulse of electric stimulation and oocyte source could affect in vitro developmental ability of nuclear transplanted caprine oocytes.

• Proceedings of the KSAR Conference
• /
• 2000.10a
• /
• pp.10-12
• /
• 2000

Members of the glycoprotein family, which includes CG, LH, FSH and TSH, comprise two noncovalently linked $\alpha$- and $\beta$-subunits. Equine chorionic gonadotropin (eCG), known as PMSG, has a number of interesting and unique characteristics since it appears to be a single molecule that possesses both LH- and FSH-like activities in other species than the horse. This dual activity of eCG in heterologous species is of fundamental interest to the study of the structure-function relationships of gonadotropins and their receptors. CG and LH $\beta$ genes are different in primates. In horse, however, a single gene encodes both eCG and eLH $\beta$-subunits. The subunit mRNA levels seem to be independently regulated and their imbalance may account for differences in the quantities of $\alpha$ - and $\beta$ -subunits in the placenta and pituitary. The dual activities of eCG could be separated by removal of the N-linked oligosaccharide on the $\alpha$-subunit Asn 56 or CTP-associated O-linked oligosaccharides. The tethered-eCG was. efficiently secreted and showed similar LH-like activity to the dimeric eCG. Interestingly, the FSH-like activity of the tethered-eCG was increased markedly in comparison with the native and wild type eCG. These results also suggest that this molecular can implay particular models of FSH-like activity not LH-like activity in the eCG/indicate that the constructs of tethered molecule will be useful in the study of mutants that affect subunit association and/or secretion. A single-chain analog can also be constructed to include additional hormone-specific bioactive generating potentially efficacious compounds that have only FSH-like activity. The LH/CG receptor (LH/CGR), a membrane glycoprotein that is present on testicular Leydig cells and ovarian theca, granulosa, luteal, and interstitial cells, plays a pivotal role in the regulation of gonadal development and function in males as well as in nonpregnant and pregnant females. The LH/CGR is a member of the family of G protein-coupled receptors and its structure is predicted to consist of a large extracellular domain connected to a bundle of seven membrane-spanning a-helices. The LH/CGR phosphorylation can be induced with a phorbol ester, but not with a calcium ionophore. The truncated form of LHR also was down-regulated normally in response to hCG stimulation. In contrast, the cell lines expressing LHR-t63I or LHR-628, the two phosphorylation-negative receptor mutant, showed a delay in the early phase of hCG-induced desensitization, a complete loss of PMA-induced desensitization, and an increase in the rate of hCG-induced receptor down-regulation. These results clearly show that residues 632-653 in the C-terminal tail of the LHR are involved in PMA-induced desensitization, hCG-induced desensitization, and hCG-induced down-regulation. Recently, constitutively activating mutations of the receptor have been identified that are associated with familial male-precocious puberty. Cells expressing LHR-D556Y bind hCG with normal affinity, exhibit a 25-fold increase in basal cAMP and respond to hCG with a normal increase in cAMP accumulation. This mutation enhances the internalization of the free and agonist-occupied receptors ~2- and ~17-fold, respectively. We conclude that the state of activation of the LHR can modulate its basal and/or agonist-stimulated internalization. Since the internalization of hCG is involved in the termination of hCG actions, we suggest that the lack of responsiveness detected in cells expressing LHR-L435R is due to the fast rate of internalization of the bound hCG. This statement is supported by the finding that hCG responsiveness is restored when the cells are lysed and signal transduction is measured in a subcellular fraction (membranes) that cannot internalize the bound hormone.

• Korean Journal of Plant Resources
• /
• v.22 no.5
• /
• pp.403-411
• /
• 2009

This study was conducted to gather the basic data on the increase of utilization for the Japanese staunton vine (Stauntonia hexaphylla), native plants which were grown in the southern districts in Korea. We have also determined their partial physical and chemical compositions and their physiological activities. Vitamin C contents in fruit skin was 85.23 mg/100 g, and that in flesh was 61.67 mg/100 g. Total amino acids contents in fruit skin increased much more by 762.72 mg/100 g DW compared to that in flesh by 434.05 mg/100 g DW. Inorganic matter contents were more increased in the fruit skin (108.48 mg/$\ell$) and its main components were K (76.53 mg/$\ell$), Ca (20.20 mg/$\ell$) and Mg (6.22 mg/$\ell$). Total phenol compound and flavonoid contents in 1,000 mg/$\ell$ methanol extracts were 7.3-9.6 mg/$\ell$ and 5.1-6.7 mg/$\ell$. Nitrite radical scavenging activity in 4,000 mg/$\ell$ methanol extracts of fruit skin and flesh for Stauntonia hexaphylla were 79.5% and 77.8%, however, that in seeds was 17.1%. Overall mushroom tyrosinase inhibition activity (% of control) was less than 10.8%. Anti-microbial activities of methanol extracts from the fruit skin against the gram negative and positive microbial strains were not significant in the lower concentration of extracting solution, however, that from flesh and seeds in terms of the inhibition diameter were $8.91{\sim}12.25\;mm$.