• Korea Journal of Hospital Management
• /
• v.9 no.1
• /
• pp.22-45
• /
• 2004

This study was performed to identify factors affecting the profitability of private hospitals in Korea different and to make informations that could be very helpful to hospitals in improving profitability. Data used in this study were collected from 112 hospitals with complete general data of present conditions as well as financial statements(balance sheets, income statements). They were chosen from hospitals that passed the standardization audit undertaken by the Korean Hospital Association from 1998 to 2001 for the purpose of accrediting training hospitals. The dependent variables were used operating margin to total assets and operating margin to gross revenues as proxy indicators for profitability. The independent variables were ownership type, location, bed size, period of establishment, debt to total assets, current ratio, fixed ratio, total asset turnover, average length of stay, bed occupancy rate, admission ratio of outpatients, personnel costs per adjusted inpatient, and fiscal years. The factors had significantly positive effect on operating margin to total assets and operating margin to gross revenues were bed size, total asset turnover. And the factors had significantly negative effect on operating margin to total assets and operating margin to gross revenues were period of establishment, debt to total assets, average length of stay, personnel costs per adjusted inpatient. The adjusted $R^2$ of multiple regression equation was 25.2%, 21.4% respectively. It is very important for private hospitals to improve profitability by raising total asset turnover, and reducing debt to total assets, average length of stay, and personnel costs per adjusted inpatient using the rational and efficient business strategy.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.16 no.1
• /
• pp.42-48
• /
• 2020

The effect of improving the tensile and J-R fracture toughness properties of SA508 Gr.1a on the LBB margin for the main steam pipe is investigated. The material properties and microstructure images of the existing main steam piping material SA106 Gr.C used in domestic nuclear power plants and the newly selected material SA508 Gr.1a were compared. For each material, LBB margins were calculated and compared through finite element analysis and crack instability evaluation. The LBB margin of the improved SA508 Gr.1a is found to be greatly improved compared to that of the existing SA106 Gr.C and SA508 Gr.1a. This is because of the increased material's strength and J-R fracture toughness compared to the previous materials. In order to analyze the effect of physical property change on the LBB margin, the sensitivity of each LBB margin according to the variation of tensile strength and J-R fracture toughness was analyzed. The effect of the change in tensile strength was found to be greater than that of the change in fracture toughness. Therefore, an increase in strength significantly influenced the improvement of the LBB margin of the improved SA508 Gr.1a.

• Journal of Korean Society on Water Environment
• /
• v.30 no.3
• /
• pp.351-360
• /
• 2014

The allocation of margin of safety (MOS) at a uniform rate to all areas of the unit watershed makes it very difficult to keep the load allotment stable in the area for lack of reduction measures like forest land. This study developed an equation to calculate margin of safety differentially according to the regional characteristics. The equation was formulated on the basis of the regional characteristic factors such as a load contribution factor for land use type and a site conversion factor for the unit watershed. The load contribution factor represents a contribution of loads from a particular land use. The site conversion factor was derived from the site conversion ratio of a unit watershed. Margin of safety for the non-point pollution load in the land use sector decreased by 20~25% in three river basins. The margin of safety in the unit watersheds with low site occupation ratios decreased in high rate, while in the unit watersheds with large urban area decreased in low rate. With the application of the differential margin of safety considering regional characteristics, not only the reduction of pollution loads can become lighter but also it can be easier to develop plans for Total Maximum Daily Loads (TMDLs) even where the reduction measures are not available.

• Journal of Korea Trade
• /
• v.25 no.1
• /
• pp.89-111
• /
• 2021

Purpose - The U.S. Trade Preference Expansion Act (TPEA) of 2015 enables the US Department of Commerce (DOC) to inflate dumping margin when the particular market situation (PMS) exists in the exporter's home market. DOC applied PMS provisions to the steel products from Korea. This paper analyzes whether DOC's calculation by using the regression analysis is consistent with WTO rules. Design/methodology - This paper analyzes the PMS application in law and regression analysis that extends the data period from 10 years to 18 years using the same economic model with DOC, and changes the country group according to the quantities of steelmaking capacity. Findings - Results show that DOC's argument conflating the sales-based with cost-based PMS designed to inflate dumping margins might not be consistent with WTO Antidumping Agreement Article 2.2 and 2.2.1.1 in which costs shall normally be calculated on the basis of records kept by the exporter, providing generally accepted accounting principles and reasonably reflection of the costs and PMS that exists in the Korean steel product markets. Even if it will be consistent, DOC's calculated margin by the regression analysis using a 10-year data is a big gap (5 times) compared with an 18-year data projection and different countries' data through the same methodology, which is a huge gap of regression coefficient. It means that dumping margin would be very wide range from 7.8% to 38.54% and unstable to calculate. Inflating dumping margin by DOC using regression analysis would not only be inconsistent with WTO rules, but also projection result is unreliable. Originality/value - Literature papers have mainly analyzed WTO law itself. This paper however, would be the first attempt to analyze the DOC's new way of dumping margin calculation in both manners of law and an empirical methodology perspective at the same time.

• Korean Journal of Radiology
• /
• v.19 no.6
• /
• pp.1053-1065
• /
• 2018

Objective: To evaluate the clinical impact of using registration software for ablative margin assessment on pre-radiofrequency ablation (RFA) magnetic resonance imaging (MRI) and post-RFA computed tomography (CT) compared with the conventional side-by-side MR-CT visual comparison. Materials and Methods: In this Institutional Review Board-approved prospective study, 68 patients with 88 hepatocellulcar carcinomas (HCCs) who had undergone pre-RFA MRI were enrolled. Informed consent was obtained from all patients. Pre-RFA MRI and post-RFA CT images were analyzed to evaluate the presence of a sufficient safety margin (${\geq}3mm$) in two separate sessions using either side-by-side visual comparison or non-rigid registration software. Patients with an insufficient ablative margin on either one or both methods underwent additional treatment depending on the technical feasibility and patient's condition. Then, ablative margins were re-assessed using both methods. Local tumor progression (LTP) rates were compared between the sufficient and insufficient margin groups in each method. Results: The two methods showed 14.8% (13/88) discordance in estimating sufficient ablative margins. On registration software-assisted inspection, patients with insufficient ablative margins showed a significantly higher 5-year LTP rate than those with sufficient ablative margins (66.7% vs. 27.0%, p = 0.004). However, classification by visual inspection alone did not reveal a significant difference in 5-year LTP between the two groups (28.6% vs. 30.5%, p = 0.79). Conclusion: Registration software provided better ablative margin assessment than did visual inspection in patients with HCCs who had undergone pre-RFA MRI and post-RFA CT for prediction of LTP after RFA and may provide more precise risk stratification of those who are treated with RFA.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.54 no.3
• /
• pp.139-143
• /
• 2005

Several methods have been proposed to mitigate the market power in foreign electricity markets. In this paper, Hirfindahl-Hirschman Index(HHI) and supply margin assessment(SMA) are compared based upon the Korean future markets. The results show that SMA is better than HHI to estimate market power because it can reflect congestion and capacity reserve effectively.

• KDI Journal of Economic Policy
• /
• v.31 no.2
• /
• pp.195-234
• /
• 2009

This paper examines relative contributions of extensive margin and intensive margin of Korean exports growth to China after 1990s', based on an analytical approach proposed by the Hummels and Klenow(2005). In this paper, extensive margin is defined as a weighted count of Korean exports categories relative to the rest of world's export categories to China. On the other hand, intensive margin refers to Korean exports to China relative to the rest of the world's exports to China, exclusively in those product categories that Korea exports to China. According to the results of the analysis, the expansion of Korean exports to China was induced mainly by the increase of intensive margin. This result is consistent with $Besede{\check{s}}$ and Prusa(2007) as well as the Helpman, Melitz and Rubinstein(2007) who suggest that intensive margin is a more important factor than extensive margin for sustaining growth of export in the long term. In addition, this paper shows that the survival rates of exports of parts and components and capital goods is relatively higher in comparison to those of primary and consumption goods. This implies that the expansion of international division of labor under the global production network could substantially affect the survival of exports.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.34 no.3
• /
• pp.149-158
• /
• 2020

The positive margins after LEEP(loop electrosurgical excision procedure) in cervical intraepithelial neoplasia are generally considered to be a risk factor for the recurrence or persistence of CIN currently. When positive margin exists, secondary LEEP or hysterectomy is performed. The aim of this study was to observe effects of Traditional Korean Medicine treatment for patients with surgical margin positive after LEEP. It was conducted retrospective chart review for 4 patients with the surgical margin positive after LEEP, who were scheduled to have secondary LEEP 3 months later. Patients were treated with herbal medicine, pharmacopuncture and herbal liquid vaginal treatment. They were followed up by cytology, colposcopy, human papillomavirus DNA test and punch-biopsy at 1, 3 and 6 months. After 3 month of treatment, three patients did not need secondary LEEP because of normal cytology, negative HPV status and normal colposcopy, while the other patient underwent secondary LEEP because of ASCUS cytology and positive high-risk HPV. After 6 month of treatment, the other patient also had normal cytology, negative HPV status and normal colposcopy and had been in fifth week of pregnancy. This study suggest that Traditional Korean Medicine treatment may be an effective to the patients with surgical margin positive after LEEP in cervical intraepithelial neoplasia.

• Restorative Dentistry and Endodontics
• /
• v.25 no.1
• /
• pp.91-108
• /
• 2000

Most of cervical abrasion and erosion lesions show gingival margin where the cavosurface angle is on cementum or dentin. Composite resin restoration of cervical lesion shrink toward enamel margin due to polymerization contraction. This shrinkage has clinical problem such as microleakage and secondary caries. Several methods to diminish contraction stress of composite resin restoration, such as modifying cavity form and building up restorations in several increments have been attempted. The purpose of this study was to compare polymerization contraction stress of composite resin in Class V cavity subjected to cavity forms and placement methods. In this study, finite element model of 5 types of Class V cavity was developed on computer tomogram of maxillary central incisor. The types are : 1) Box cavity 2) Box cavity with incisal bevel 3) V shape cavity 4) V shape cavity with incisal bevel 5) Saucer shape cavity. The placement methods are 1) Incisal first oblique incremental curing 2) Bulk curing. An FEM based program for light activated polymerization is not available. For simulation of curing dynamics, time dependent transient thermal conduction analysis was conducted on each cavity and each placement method. For simulation of polymerization shrinkage, thermal stress analysis was performed with each cavity and each placement method. The time-temperature dependent volume shrinkage rate, elastic modulus, and Poisson's ratio were determined in thermal conduction data. The results were as follows : 1. With all five Class V cavifies, the highest Von Mises stress at the composite-tooth interface occurred at gingival margin. 2. With box cavity, V shape cavity and saucer cavity, Von Mises stress at gingival margin of V shape cavity was lower than the others. And that of box cavity was lower than that of saucer cavity. 3. Preparing bevel at incisal cavosurface margin decreased the rate of stress development in early polymerization stage. 4. Preparing bevel at incisal cavosurface margin of V shape cavity increased the Von Mises stress at gingival margin, but decreased at incisal margin. 5. At incisal margin, stress development by bulk curing method was rapid at early stage. Stress development by first increment of incremental curing method was also rapid but lower than that by bulk curing method, however after second increment curing final stress was the same for two placement methods. 6. At gingival margin, stress development by incremental curing method was suddenly rapid at early stage of second increment curing, but final stress was the same for two placement methods.

• Economic and Environmental Geology
• /
• v.27 no.6
• /
• pp.571-577
• /
• 1994

It has been controversial whether the United States Atlantic margin, which developed during Mesozoic separation of Africa and North America, is a volcanic or non-volcanic rifted margin. To understand its nature, the basement images of multi-channel seismic profiles off the southeastern United States continental margin have been examined. One of prominent results is the presence of seaward-dipping reflector (SDR) wedges, the most diagnostic feature of volcanic rifted margins. Two sets of SDR wedges appear to exist here; one along the basement hinge zone ('the hinge SDR wedge') and another seaward of the East Coast magnetic anomaly ('the outer SDR wedge'). Seaward of the basement hinge zone, the lower crustal high-velocity body previously known as the 7.2 km/s layer and the underlying smooth Moho configuration are also observed. Based on the comparison of these basement images with the crustal structures of the well-known volcanic rifted margin, the southeastern United States Atlantic margin can now be characterized as a typical volcanic rifted margin.