• Title/Summary/Keyword: Korean larch

Search Result 312, Processing Time 0.026 seconds

Comparison of Cellular Anatomical, Physical and Mechanical Properties Between Dahurian Larch and Japanese Larch (잎갈나무와 일본잎갈나무의 해부학적, 물리·역학적 특성 비교)

  • Han, Yeonjung;Kim, Min-Ji;Lee, Hyun-Mi;Kang, Jin-Taek;Eom, Chang-Deuk
    • Journal of the Korean Wood Science and Technology
    • /
    • v.45 no.5
    • /
    • pp.525-534
    • /
    • 2017
  • The study aims to observe the cellular anatomical properties of Dahurian larch and Japanese larch for the species identification. In addition, other factors - the ring width, tracheid length, density, and strength - were compared and analyzed to clarify their physical and mechanical properties. To the end, three Dahurian larch trees and three Japanese larch trees by each diameter class were collected as specimens from Jeongseon-eup, Jeongseon-gun, Gangwon-do, to conduct a stem analysis. It was found that the average stand age, average diameter at breast height, and average tree height of three Dahurian larch trees and Japanese larch trees were 74 years and 51 years, 442 mm and 352 mm, and 26.1 m and 20.8 m, respectively. The cellular anatomical difference between Dahurian larch and Japanese larch can be usually found by spiral thickening, considering that it doesn't occur in Dahurian larch at all, while rarely does in the ray tracheids of Japanese larch. However, in this study, spiral thickening was not observed in the radial section of Japanese larch. The average annual growth diameters measured at 1.2 m-height of Dahurian larch and Japanese larch were 5.167 mm and 5.954 mm, respectively. Meanwhile, arboreal growth of Japanese larch was observed to be higher than that of Dahurian larch. In the physical properties test, it was measured that the latewood proportion and oven-dry density of Dahurian larch with low annual diameter growth were higher than those of Japanese larch, while the mechanical properties of Dahurian larch wood were measured 2-7% higher than those of Japanese larch wood. The data obtained from this study are expected to be used as the basic reference for species identification between Dahurian larch and Japanese larch by DNA analysis.

Flower Induction in Greenhouse-grown Hybrid Larch Grafts and Field-grown European Larch Seedlings (온실(溫室)에서 자라는 낙엽송(落葉松)의 접목묘(接木苗)와 야외(野外)에서 자라는 실생묘(實生苗)로부터 개화(開花)의 유도(誘導))

  • Shin, Dongill
    • Journal of Korean Society of Forest Science
    • /
    • v.85 no.3
    • /
    • pp.532-538
    • /
    • 1996
  • GA4/7 spray, injection and several cultural treatments were applied to the greenhouse-grown potted hybrid larch(Larix decidua${\times}$leptolepis) grafts and field-grown European larch seedlings to induce early flowering. A treatment consisting of repeat-ed GA4/7 sprays, alone, was the most effective flower induction treatment for greenhouse-grown, potted larch grafts. Root pruning as a adjunct treatment did not show synergistic effects. Injection for potted grafts with GA4/7 was not useful approach in this study and it resulted in increased mortality. In the field experiment with 10-Year-old larch seedlings, repeated GA4/7 sprays in combination with root pruning or with plastic mulching appears to be useful and practical means for inducing larch flowers:

  • PDF

Development of New Products and High Value Added Biopolymer from Softwoods by Chemical Modification - Quantitative Variation of Water-soluble Extracts from Coniferous Barks for Tannin-based Adhesives - (화학가공에 의한 침엽수재의 품질귀화 및 고부가 Biopolymer 개발 (I) - 타닌접착제를 위한 침엽수 수피의 수용성 추출물의 양적 변이 -)

  • Cho, Nam-Seok;Han, Gyu-Seong
    • Journal of the Korean Wood Science and Technology
    • /
    • v.24 no.4
    • /
    • pp.1-6
    • /
    • 1996
  • Extracts from bark have been studied with a view to producing water-proof wood adhesives. Lately many softwoods, such as radiata pine from New Zealand and larch from Siberia, Russia, have been imported and utilized, and their residual barks would be expecting as potential raw materials for something useful chemicals. The great effort toward utilization of bark extractives as a chemical feedstock has been made on a worldwide level. However few report has been done for the utilization of tree bark extractives in Korea. Hot-water extracts were prepared from barks of Japanese larch(Larix leptolepis). Siberian larch(Larix gmelinii) and Radiata pine(Pinus radiata). The effect of various factors, such as particle size, liquor ratio, extraction temperature, and reaction time, on the extractive yields was discussed. Particle sizes affected the hot-water extractives: the finer the particle size, the higher extractives and extract efficiency. Higher temperature and higher liquor ratio were more effective. Extractives from Japanese larch were relatively less than those from Siberian larch and Radiata pine barks. Formaldehyde precipitates was the highest in extractives of Radiata pine barks. It could be concluded that Siberian larch bark was the best raw material for tannin adhesives, because its extractive yield was higher than those of the other barks.

  • PDF

Carbon and Nitrogen Distribution of Tree Components in Larix kaempferi Carriere and Quercus variabilis Blume Stands in Gyeongnam Province

  • Kim, Choonsig
    • Journal of Korean Society of Forest Science
    • /
    • v.108 no.2
    • /
    • pp.139-146
    • /
    • 2019
  • This study was conducted to determine the carbon (C) and nitrogen (N) distribution within tree components (i.e., stem, branches, leaves, and roots) of the Japanese larch (Larix kaempferi Carriere) plantation and natural oriental cork oak (Quercus variabilis Blume) stands. Fifteen Japanese larch and 15 oriental cork oak trees were destructively sampled to compare the C and N stocks in the components of the trees from three different regions-Hadong-gun, Hamyang-gun and Sancheong-gun-in Gyeongnam Province, South Korea. Species-specific allometric equations were developed to estimate the C and N contents in the tree components based on the diameter at breast height (DBH). There were differences in mean C and N concentrations between the Japanese larch and the oriental cork oak. The mean C concentrations of the tree componentswere significantly higher in Japanese larch than in oriental cork oak; whereas, the N concentration in the stems was significantly lower in Japanese larch than in oriental cork oak. The allometric equations developed for C and N content were significant (p < 0.05) with a coefficient of determination ($R^2$) of 0.76 to 0.99. The C and N stocks in the tree components do not appear to be affected by the species such as Japanese larch plantations and oriental cork oak stands. This study emphasizes the importance of C and N concentrations to estimate the C and N distribution according to tree components in different tree species.

Litterfall and Nutrient Dynamics in Pine (Pinus rigida) and Larch (Larix leptolepis) Plantations

  • Kim, Choonsig;Koo, Kyo-Sang;Byun, Jae-Kyung
    • Journal of Korean Society of Forest Science
    • /
    • v.94 no.5 s.162
    • /
    • pp.302-306
    • /
    • 2005
  • Litterfall and nutrient inputs were measured in even-aged coniferous plantations (a 31-year-old Pinus rigida and a 31-year-old Larix leptolepis) on a similar site condition in the Forest Practice Research Center, Gyeonggi Province. Litterfall was collected monthly from circular littertraps (collecting area: $0.50m^2$) for three years between April 1997 and February 2000. Average total annual litterfall was significantly higher for pine (5,802 kg/ha/yr) than for larch (4,562 kg/ha/yr) plantations. Needle litter in both plantations accounted for about 63% of total litterfall. Litterfall in the larch was distributed as follows: needle > other leaf > branch > miscellaneous > bark, while it was needle > miscellaneous > other leaf > branch > bark in the pine plantation. There was no temporal variation in needle litter, other leaf and bark during the 3 year study period. The concentrations of all nutrients (N, P, K, Ca, Mg) in needle litter were significantly higher in the larch than in the pine plantations. The annual nutrient concentration of needle litter in the larch varied among the years, whereas no year variation of needle litter was in the pine except for phosphorus (P). Nitrogen (N) and P inputs by needle litter were significantly higher for larch than for pine plantations established on a similar soil. The differences in N and P inputs were attributed to lower nutrient concentration in pine needle litter compared with larch needle litter, not to total needle litter mass. Annual inputs of nutrient in both plantations were not significantly different among years except for K of the larch although there was yearly different in needlefall mass and nutrient concentration during the 3-year observed period. The results indicate that the mechanisms of litterfall and nutrient inputs vary considerably between pine and larch plantations established on a similar site condition.

Analysis of Water Retention Capacity at Sasa borealis Stands in Jirisan National Park (지리산국립공원 내 조릿대 임분의 수원함양기능 분석)

  • Ji, Hyung Woo;Park, Jae Hyeon
    • Journal of the Korean Society of Environmental Restoration Technology
    • /
    • v.11 no.3
    • /
    • pp.1-11
    • /
    • 2008
  • Although landslides were frequently occurred under Tripterygium regelii and Rubus sp. vegetations, the damage of landslide was not observed in sasa (Sasa borealis) stands. These phenomena may be affected by forest vegetation types. This result suggested that the landslide occurred in Jirisan (Mt.) National Park may be closely related to water retention capacity at Sasa borealis stands. This study compared and analyzed the water retention capacity of each soil horizon of sasa, larch (Larix leptolepis) and mongolian oak (Quercus mongorica) stands. Soil bulk density in A horizon was lower in sasa (0.776g/$cm^3$) than in mongolian oak (0.828g/$cm^3$) and in larch stands (1.282g/$cm^3$). Water permeability in A horizon was 0.02055cm/sec for sasa, 0.00575cm/sec for mongolian oak, and 0.0007cm/sec for larch stands, respectively. The water permeability of sasa stand was about 3.6 times and about 29 times higher than in mongolian oak and in larch stands, respectively. This result indicates that water infiltration of soil surface during a rain event is more rapid in sasa than in other two stands. Soil organic matter content in B horizon was lower in larch (0.7%) than in mongolian oak (6.5%) and in Sasa (3.3%) stands. The solid ratio in A horizon was highest in larch among three stands, but that of mongolian oak and larch stands showed a similar rate. Pore space rates was 70.7% for A horizon and 70.6% for B horizon of sasa, 68.9% for A horizon and 70.6% for B horizon of sasa, 68.9% for A horizon and 70.6% for B horizon of mongolian oak forests and 51.7% for A horizon and 49.2% for B horizon of larch forests, respectively. According to pore space rates, the water retention capacity may be poor in larch stand compared with other two stands. Soil strength in sasa and mongolian stands was over 25kgf/$cm^2$ from 40cm depth, while the strength was over 25kgf/$cm^2$ from 25cm depth in larch stand. The result indicates that tree growth and water permeability in larch stand could be limited due to high soil strength. Larch stand was poor for soil pore space development to be offered to the water retention capacity, but water retention capacity of A horizon soil in sasa stand was high than that of other two stands. Therefore, establishment of sasa stand under larch stand could help to prevent landslides.

Ecological Studies on Several Forest Communities in Kwangnung. A Study of the Site Index and the ground vegetation of Larch (광릉삼림의 생태학적 연구 낙엽송의 Site Index와 임상식생에 관하여)

  • 차종환
    • Journal of Plant Biology
    • /
    • v.9 no.1_2
    • /
    • pp.7-16
    • /
    • 1966
  • In order to determine the factors related to site quality, 13 areas of Larch growing in the Kwangung and its vicinity forest as sample plots, were examined. Sample plots included various site classes as well as age classes. Three were divided into two groups (major and minor trees). Average height of dominant trees was determined through messurement of 5 to 6 dominant tree in each sample plots. Average height of dominant 30 year-old trees was the basis for site index. A Standard Yield Table for the larch produced in Kwangnung forest was made by various data, which included age class 5, ranging from 10 to 45 years. The relationship of the height of the trees, the site conditions, and ground vegetation are investigated in this paper. The site indexes of 40 forest class age in 28-B and 28-G forest classes of the larch associations for ground vegetation had comparatively rarge differences due to the sampled areas. The relation of the direction of forest communities to the height and the diameter of the tree shwoed that its communiteis of northest and northwest parts appeared higher valueof the height and the diameter. The diameter and the height of trees were closely realted to each other. The samller the occupied area per tree and the smaller the average distance among trees, the more density was increased. The larger the density was the lower height of the trees. In the ground vegetation of the larch communities, there seems to be a definite correlation between the height of trees and the occupied area per tree or the average distance among the trees. The height of trees and site index of two larch communities were as follow: 28-B forest class site index 20.8, height 24.0m, 28-G forest class site index 18.4, height 20.9m. The ground layer was analyzed by the method of Quadrat(20/20sq. cm) with an interval of 1M. It set up 40 Quadrats of the larch communiteis. The community structure of the ground vegetation of two larch was analyzed, and important value was calculated and then evaluated. The ground vegetation under the larch had developed Burmannii Beauv stratal society below the 28-B and 28-G the forest class. Accordingly, the first important value of Burmannii Beauv was found in two ground vegetation below the larch. Therefore, this species could be quantitatively considered as the forest indicator species. Common species of each community appeared 18 species out of 34 species in the ground vegetation under two larch communities. The ground vegetation of the 28-B forest class showed more than that of the 28-G forest class. the similarity of the ground vegetation was measrued by the Frequency Index Community Coefficient. The differences between the associations were lcearly manifested by the ground vegetation tested by Gleason's Frequency Index of Community Coefficient for the analysis of each stratal society of all associations. According to F.I.C.C. the ground vegetation under two larch(28-B and 28-G) forest classes showed higher value. An investigation into the relationship of physical and chemical properties of soil and site was considered the next step to be taken in the study of the larch site classification.

  • PDF

Studies on the Characteristics of Extractives in Japanese Larch (Larix leptolepis Gordon) Grown in Korea (낙엽송(落葉松) 추출성분(抽出成分) 이용(利用)에 관(關)한 기초연구(基礎硏究))

  • Cho, Nam-Seok;Lee, Jong-Yoon;Ahn, Won-Yung
    • Journal of the Korean Wood Science and Technology
    • /
    • v.10 no.2
    • /
    • pp.12-21
    • /
    • 1982
  • Red pine and Japanese larch (Larix leptolepis Gordon) grown in Korea have been the main species of coniferous resources in Korea. Especially, planting area of Japanese larch has been increased continueously in the recent years due to its superior plant type and rapid growth rate and its stocks reached approximately 4.32 million cubic meters at the present time. Although many research works have been done for the utilization of the larch wood in various ways, still many problems are existed in its chemical applications due to a large proportion of soluble extractives. In this study, chemical composition of larch extractives and chemical structure of its major component were analyzed. In order to identify the basic structure of major component, gas-liquid chromatography for separation of some completely methylated alditols as their acetates on a 3% - ECNSS-M on Gas Chrom Q. column was used. Proportion of extractives of Japanese larch wood was higher than that of other conifers and major component of the soluble extractives was arabinogalactan, a schematic structural formula which was presented in Figure 2. The molar ratio of arabinose and galactose was 1:4.5. The main chain of arabinogalactan was composed of 1,3 linked ${\beta}$-D-galactopyranose residues, each of which carried a side chain, attached to the C-6 positions. The exact nature of all of the side chains is not known, but the majority of these side chain was composed of 1, 6 linked ${\beta}$-D-galactopyranose residues, with 2~3 such units present per average chain. Some of the galactose units in the main chain had a residue of 3 - 0 - ${\beta}$-L-arabinopyranosyl-L-arabinofuranose. In addition, a few terminal residues of D-glucuronic acid also was confirmed, attached to C-6 position of the D-galactopyranose residue. It could concluded that the main structure of highly branched arabinogalactan from Japanese larch extractive was essentially the same as those of the other larch species.

  • PDF

Effects of Softwood Log Property and Veneer Defect on Veneer-and Plywood Manufacturing Yield (침엽수재(針葉樹材)의 원목형질(原木形質)과 단판결함(單板缺陷)이 단판(單板) 및 합판제조수율(合板製造收率)에 미치는 영향(影響))

  • Suh, Jin-Suk;Park, Jong-Young;Jo, Jae-Myeong
    • Journal of the Korean Wood Science and Technology
    • /
    • v.16 no.4
    • /
    • pp.40-47
    • /
    • 1988
  • Our plywood manufacturing industries which entertained prosperous stage in late 1970's have come to be in face of the problems of conceedingly obtaining good quality logs and yield up-grading, which is considered by future-replaceable forest resources. In view of this point, manufacturing characteristic on softwood plywood using Japanese larch, pitch pine as domestic plantation species, and western hemlock as foreign species was studied. In this study, veneer- and plywood manufacturing yields were discussed in relation to log properties and veneer defects (knots). The summarized conclusions were as follows: 1. The majority of sample logs belonged to second grade on the standard. And, eccentricity of larch was the highest 11%, about 2 times those of pitch pine, hemlock. 2. Knot frequency of occurrence of larch reached 19% within log height 8m, and pitch pine 13% within 4m. Correspondingly, the log height of larch available for plywood manufacture was higher by about 2 times that of pitch pine. 3. In the knot types, most of knots of larch appeared dead, whereas those of pitch pine and hemlock appeared live. In size of knots, larch and hemlock showed relatively small 1-2cm dia. by 70% or more and pitch pine did the larger 24cm by 65%. Generally the more knot emerged in the inner side of veneer than the outer. 4. Plywood manufacturing yields by peeling with spindle revolution lathe were 37% in larch > 32% in hemlock> 26% in pitch pine. S. Jointed core veneer yields by peeling with outer perimeter back-up lathe were 55% in hemlock> 53% in larch> and 48% in pitch pine.

  • PDF

Quantitative Variation of Alkali-soluble Extracts from Coniferous Barks for Tannin-based Adhesives (타닌접착제를 위한 침엽수 수피의 알칼리성 추출물의 양적 변이)

  • Cho, Nam-Seok;Kim, Young-Sin;Han, Gyu-Seong
    • Journal of the Korean Wood Science and Technology
    • /
    • v.25 no.1
    • /
    • pp.23-27
    • /
    • 1997
  • Alkali-soluble extracts were prepared from barks of Japanese larch(Larix leptolepis). Siberian larch(Larix gmelineii) and Radiata pine(Pinus radiata) The effect of various factors, such as particle size, liquor ratio, extraction temperature, and reaction time, on the extracts yield was investigated. Particle sizes affected the alkali-soluble extracts; the finer the particle size, the higher extracts and extract efficiency. High temperature and high liquor ratio were more effective. In the range of 0.25% to 1% NaOH concentration, alkali extracts were increased with the increasing alkali concentration. However, extract yields were leveled off above 0.5% alkali concentration. Extractions with NaHCO3 were almost equivalent to those of NaOH extraction. 1% NaOH and 1% NaHCO3 resulted in the highest yields of alkaline extracts. Extracts from Japanese larch were lower than those from Siberian larch and Radiata pine barks. Siberian larch bark was the best raw material for tannin adhesives, because its extractive yield was higher than those of the other barks. Concerning pH of alkaline media during extraction, small increases of the extract yields were resulted at range of pH 7 to pH 9, while a large increases from pH 9.0 to pH 12. This phenomenon is attributed to higher alkalinity.

  • PDF