• 한국환경과학회지
• /
• 제5권3호
• /
• pp.253-263
• /
• 1996

This study is an attempt to classify climatic regions of Korea based on the data of sunshine duration and to clarify the characteristics of sunshine for each divided regions. The data used in this study are the mean values of monthly and ten-daily sunshine duration, sunshine percentage, solar radiation and proud amount obtained from 63 weather stations of the Korea Meteorological Administration during the period of 1974~ 1993. The characteristics of annual change of sunshine percentage, annual duration of sunshine, percentage of sunshine, annual radiation, amount of cloud, days of sunshine percentage above 80% and-days of sunless are investigated by the mean values of -the stations belong to divided regions. The ward method of hierarchical cluster analysis is adopted to the analysis of data for the regional division. The results obtained in this study are summarized as follows. (1) The sunshine regions of Korea can be divided into six regions of the central west, central east, south west, souls east, Ullung-do and Cheju-do. These are strongly affected by the dirtribution of inclined slopes taking account of the topographic characteristics of Korea. (2) Annual distribution shows the sunshine duration of 1777~ 2287 hours, sunshine percentage of 40~53%, solar radiation of 3469~4637 MJ/$m^2$, cloud amount of 5.0~6.1, days of sunshine perrentage above 80% of 53~116days and sunless days of 46~71days. (3) The types of annual change of sunshine percentages is classified with four types of minimum in July and maximum in October, minimum in July and maximum in December, high in May and October and low in July and January, high in May and November and low in June and January. (4) The long-term trend of sunshine duration decrease in peninsula area but increase in island area and the Tong-term inclination of cloud amount is almost zero. The author believe this tendency is related to a pollutional turbidity than a cloud amount in inland area.

• The Korean Journal of Ecology
• /
• 제15권2호
• /
• pp.103-115
• /
• 1992

This dissertation, which has been prepared in the region of cheju(33o31'N, 126o32'E) from may,1987 to appril, 1989, is to elucidate the dominant characteristics of early stages in secondary succession, by examining the life history of erigeron annuus for the seeding depth of a seed was dependent upon the degree of shading. That is, on the area of ocm,the more tense the shading was, the more germination percentage was increased, while, in the case of 1.5cm, it was somewhat increased, when shading bwcame ess and less tense. The rosette of e. annuus, through its relative light intensity was decreased by shading, up to 5% of natural light, showed some strong shade tolerance, which had no difficulty in matter production. The species diversity of mixed-species community was the highest in the middle of April, the lowest in the last of may. The dominance index was the highest in the late may, the lowest in the middle of April. Toward the end of may, the occupation rate of dominance species was the highest. There was a neutral relationship between intraspecific and interspecific, owing to the differentiation of its niche, temporally and spatially. Productive structure of the community revealed a narrow leaf type which was concentratively distributed in the mid part of community height. The relative light intensity of community ground surface was 6.1%, the leaf inclination 60o,the extinction coefficient(k) 0.4, biomass of community 1,045.6 g.d.w./m2,T/Rratio 9.3, C/Frate 7.0 and sumgermanition, shade toarance and community characteristics on erigeron annuus l.in chejumed leaf area index 3.88. through the various life cycles o e.annuus, we can say that it decreases mortality of seeding caused by some stress and disturbance, for germination lasts for a long time at any opportunity available, and it promotes population growth. The strong shade tolerance of a rosette and the variableness of a life from differentiate the niche between intraspecific and interspecific within the community, and avoid the direct competition between them, thus poromoting community growth.

• 터널과지하공간
• /
• 제11권4호
• /
• pp.301-310
• /
• 2001

열 여섯개의 절리 면을 가진 석고 시편을 제작, 일축 압축 실험을 하여 관측된 결과를 절리 면이 두 개 및 세개 가진 시편의 실험 결과와 비교하였다. 그 결과 다중 절리면(열여섯 면)에서 관측된 익형(翼形)크랙, 이차 크랙, 연절리 (連節理) 유형은 절리가 두 개 및 세 개를 가진 시험체와 비슷한 형상을 보였다. 익형 크랙은 절리면과 일정한 각도를 유지한 상태에서 시작하여 안정적으로 진전, 최대 압축응력 방향으로 발달하였으며 이차 크랙 또한 안정적인 진전 양상을 보였으나 높은 하중 상태에서 이차 크랙은 불안정한 진전을 보이며 연절리 현상을 보였다. 이차 크랙의 종류로는 유사 공면(共面) 및 사면(斜面) 이차 크랙이 관측되었다. 연절리 현상은 익형 크랙과 이차 크랙에 의한 절리면의 연결로 나타나며 본 실험에서 네 종류의 연절리 현상이 관측되었다. 관측된 연절리의 발생 형태, 익형 크랙 및 이차 크랙의 초기 발생 응력은 절리면의 간격, 연속성, 경사각, 단선(短線)각도와 절리면의 배열과 관련이 있다.

• 방송공학회논문지
• /
• 제23권5호
• /
• pp.636-641
• /
• 2018

최근 디지털 사이니지 기술은 정방형 디스플레이로 콘텐츠를 표출 뿐만 아니라 다양한 형태와 크기를 가진 비정형 디지털 사이니지로 발전하고 있다. 고해상도의 대형 모니터들을 연결하여 다양한 조합을 이루는 멀티비전 형태로 표현하고 있다. 본 논문에서는 멀티디스플레이의 회전에 따라 ROI가 독립적으로 변하는 비정형 디스플레이 사이니지 시스템의 구조를 제안하였다. 아두이노와 연동된 자이로 센서의 출력 값을 입력으로 받아 모니터의 기울어진 각도를 계산하고, 극좌표계의 특성을 이용하여 회전되는 각도에 따라 네 꼭짓점의 위치가 가변되는 영상을 영상좌표계로 변환하여 회전형 사이니지를 구현하였다. 또한 멀티 스크린 환경에서 화면을 표출하기 위하여 자이로 센서가 부착된 다수의 디스플레이를 아두이노의 시리얼 통신을 이용하여 제어하였다.

• 대한토목학회논문집
• /
• 제31권2C호
• /
• pp.83-92
• /
• 2011

암반에서의 탄성계수는 암반의 변형특성을 나타내는 매우 중요한 인자로서 암반에서의 터널굴착으로 인한 내공변위를 파악하는데 이용된다. 그럼에도 불구하고 현재까지는 암석종류 및 절리특성을 반영하여 탄성계수를 산정하는 연구는 미흡한 것으로 판단된다. 따라서, 본 연구는 다양한 암석 및 절리상태에서 암반의 탄성계수를 추정하는 방법과 그 결과를 제시하고자 한다. 이를 위해서 2차원 개별요소법에 근거한 수치해석이 수행될 것이며 이를 통해 암석과 절리상태가 고려된 터널굴착 유발 내공변위가 조사될 것이다. 조사된 변위결과는 암반에서의 원형터널에 대한 탄성이론을 역이용하여 암석종류 및 절리특성이 반영된 탄성계수를 추정하는데 사용될 것이다. 본 연구를 통해 암석종류 및 절리특성을 고려하여 추정된 탄성계수는 향후 실무에서 절리가 형성된 암반터널에서의 발생변위를 파악함에 있어서 그 활용도가 매우 클 것으로 기대된다.

• Journal of Astronomy and Space Sciences
• /
• 제37권3호
• /
• pp.209-218
• /
• 2020

This paper describes the initial operations and preliminary results of the Instrument for the study of Stable/Storm-time Space (ISSS) onboard the microsatellite Next Generation Small Satellite-1 (NEXTSat-1), which was launched on December 4, 2018 into a sun-synchronous orbit at an altitude of 575 km with an orbital inclination angle of 97.7°. The spacecraft and the instruments have been working normally, and the results from the observations are in agreement with those from other satellites. Nevertheless, improvement in both the spacecraft/instrument operation and the analysis is suggested to produce more fruitful scientific results from the satellite operations. It is expected that the ISSS observations will become the main mission of the NEXTSat-1 at the end of 2020, when the technological experiments and astronomical observations terminate after two years of operation.

• 패션비즈니스
• /
• 제11권1호
• /
• pp.15-25
• /
• 2007

As a part of the study for the materials development of compound feelings, therefore, this study investigated into the effects of the colors of warp and weft on the overall colors of fabrics, along with the visual changes of colors by the measuring angle of both warp and weft, by means of cross-dyeing of cotton/PET union fabrics. First, the dyeing of cotton and PET fabrics individually with the same color, the dyeing of PET fabrics followed by that of cotton fabrics resulted in a small difference in color than the dyeing in the reversed order. Second, in the case of the dyeing of cotton/PET union fabrics with the color of one fiber fixed and that of the other in ten colors, the color of cotton fiber, which is warp, gave much influence. In addition, the color change was remarkable among complementary colors, while it was negligible among adjacent colors. Third, in the case of dyeing of cotton/PET union fabrics with the color of one fiber fixed and that of the other in ten colors, the results were different by the measuring angle. When PET was fixed in green and cotton was dyed in ten colors, color-deepening was observed by the inclination in the direction of warp and weft without the dominance over all colors like cotton. When cotton was dyed in red and PET in ten colors, the color of PET appeared dimly in the horizontal case by the direction of the light, and red appeared as inclined in the direction of warp and weft. This is because of the dominance of cotton color over the overall color, since the density of cotton fiber, the warp of union fabrics, is higher than that of PET, the weft. Thus, this is to be considered in the selection of the warp's color. In view of the above results, the color changes are outstanding when the color of warp dominates the overall color and when the colors of warp and weft are complementary, in comparison with the case when the colors are adjacent. The colors also change by the measuring angle.

• Journal of Biosystems Engineering
• /
• 제32권5호
• /
• pp.339-347
• /
• 2007

A hexapod walking robot had been developed for gathering information in the field. The developed robot was $260{\times}260{\times}130$ ($W{\times}L{\times}H$, mm) in size and 14.7 N in weight. The legs had nineteen degrees of freedom. A leg has three rotational joints actuated by small servomotors. Two servomotors placed at ankle and knee played the roles of vertical joint for up and down motions of the leg and the other one placed at coxa played the role of horizontal joint for forward and backward motions. In addition, a servomotor placed at thorax between the front legs and the middle legs played the role of vertical joint for pumping the two front legs to climb stair or inclination. Walking motion of the robot was executed by tripod gait. The robot was controlled by manual remote-controller communicated by an infrared ray. Two controllers were equipped to control the walking of the robot. The sub-controller using PIC microcomputer (Microchips, PIC16F84A) received the 16 bit command signal from the manual remote controller, decoded it to 8bit and transmitted it to the main microcomputer (RENESAS, SH2/7045), which controlled the 19 servomotors using the PWM command signals. Walking speeds were controlled by adjusting the period of command cycle and the stride. Forward walking speed were within 100 cm/min to 300 cm/min. However, experimental walking speed had the error of 4-40 cm/min to compare with the theoretical one, because of slippage of the leg and the circular arc motion of servomotor of coxa.

• Journal of Biosystems Engineering
• /
• 제34권6호
• /
• pp.404-410
• /
• 2009

This study was carried out to develop a self-propelled type explosive subsoiler for improving the root zone soil conditions in orchard and other forest fields. Prototype was designed to be able to inject air and other soil improving material such as lime into soil at the same time, and thus improve the air permeability and drainage of orchard soils to promote the root growth of tree for high quality fruit production. Soil penetration device of explosive subsoiler is composed of air hammer, penetration rob and air injection nozzle. To support the soil penetration device of explosive subsoiler to penetrate vertically, modified Scott-Russel mechanism was used. Timing control device for simultaneous injection of soil improving material with air was attached to the out side wall of air cylinder and as the cylinder move, the soil improving material was injected into soil at the same time. Turning radius of prototype was 2.2-2.3 m with good mobility in sloped land. It took approximately 1 minute for lime injection system to reach the optimum pressure of 9.9 kg/$cm^2$, average 10-20 seconds were required to rupture soil with the depth of 50 cm and 2-3 seconds were required for explosion, so all in all about 1 minute and 20 seconds were required for one cycle of explosion. Maximum soil rupture depth and diameter were 50 cm and 3-4 m respectively depending on the soil type and soil moisture content. For final design of explosive subsoiler inclination angle of lime hopper was increased from 60 degree to 70 degree and the shape of hopper was changed from rectangular cone to circular cone to solve the clogging problem of lime at out let. Agitating system operated by compressed air was attached to the metering device of the prototype, thus more than 90 cc of lime was discharged per cycle from metering device without clogging problems.

• Journal of Astronomy and Space Sciences
• /
• 제29권1호
• /
• pp.33-40
• /
• 2012

Triplet Ionospheric Observatory (TRIO) CubeSatforIon, Neutral, Electron MAgneticfields (CINEMA) is a CubeSat with the weight 3 kg that will be operated in the orbit conditions of about 800 km altitude and $90^{\circ}$ inclination angle, using the S-band and ultra-high frequency (UHF)-band communication frequencies. Regarding the communication antenna loaded on the satellite, the two patch antennas has the downlink function in the S-band, whereas the two whip antennas has the function to receive the command sent by the ground station to the satellite in the UHF-band. The uplink ground station that communicates through the UHF-band with the CINEMA satellite was established at Kyung Hee University. The system is mainly composed of a terminal node controller, a transceiver, and a helical antenna. The gain of the helical antenna established at the Kyung Hee University ground station was 9.8 dBi. The output of the transceiver was set to be 5 W (6.9 dB) for the communication test. Through the far-field test of the established system, it was verified that the Roman characters, figures and symbols were converted into packets and transmitted to the satellite receiver in the communication speed of 9,600 bps.