• Korean Journal of Biological Psychiatry
• /
• v.17 no.3
• /
• pp.136-144
• /
• 2010

Objectives : The $2^{nd}$ to $4^{th}$ digit length(2D : 4D) ratio reflects the amount of exposure and sensitivity to the prenatal sex hormone and it is considered to be the most convenient and useful way to understand the influence of sex hormone in the determination of human behavioral traits. This study was carried out to find the correlation between the 2D : 4D ratio and characteristics of temperament and character in Korean university students. We assumed that 2D : 4D ratio would show a strong correlation with temperament which is defined to be an inclination of an automatical emotional response to a stimulus. Methods : Participants were 104 university students who completed 2 self-report measures : Temperament and Character Inventory(TCI), Temperament Test. We examined the 2D : 4D ratio of each subject by measuring the lengths of the $2^{nd}$ and $4^{th}$ fingers using a photocopy measurement. We performed statistical analyses using correlation test and t-test to examine the relationship between 2D : 4D ratio and psychological characteristics. Results : We found out the typical sex difference in 2D : 4D ratio. Women had significantly higher 2D : 4D ratio than men. TCI-Character factor(TCI-C) didn't show any significant correlation with the 2D : 4D ratio. TCI-Tempterament factor(TCI-T) and the item of Temperament Test showed a significant correlation with the 2D : 4D ratio. In correlation analysis of the total group including all women and men, the 2D : 4D ratio showed a significant positive correlation in a subscale(shyness with stranger) of harm avoidance scales in TCI-T. In correlation analysis of women's group, the 2D : 4D ratio showed a significant positive correlation in two subscales( fear of uncertainty) and[shyness to stranger] of harm avoidance scales in TCI-T. In correlation analysis of men's group, the 2D : 4D ratio showed a significant negative correlation with a sanguine temperament item of the Temperament Test. Conclusion : The results suggest that the amount of exposure to sex hormone in the prenatal period seems to have an impact on the determination of temperament and characteristics.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.1
• /
• pp.59-68
• /
• 1999

Recently, research and developmental direction of communication system is concurrent adopting voice data and face image in speaking to provide more higher recognition rate then in the case of only voice data. Therefore, we present a method of lipreading in speech image sequence by using the 3-D facial shape model. The method use a feature information of the face image such as the opening-level of lip, the movement of jaw, and the projection height of lip. At first, we adjust the 3-D face model to speeching face image sequence. Then, to get a feature information we compute variance quantity from adjusted 3-D shape model of image sequence and use the variance quality of the adjusted 3-D model as recognition parameters. We use the intensity inclination values which obtaining from the variance in 3-D feature points as the separation of recognition units from the sequential image. After then, we use discrete HMM algorithm at recognition process, depending on multiple observation sequence which considers the variance of 3-D feature point fully. As a result of recognition experiment with the 8 Korean vowels and 2 Korean consonants, we have about 80% of recognition rate for the plosives and vowels. We propose that usability with visual distinguishing factor that using feature vector because as a result of recognition experiment for recognition parameter with the 10 korean vowels, obtaining high recognition rate.

• Korean Journal of Cognitive Science
• /
• v.31 no.4
• /
• pp.137-154
• /
• 2020

Psychological properties of learners have influence on learning behaviors in various ways. The purpose of this study was to examine how the goal orientation of learners affected the learning time distribution method. Regulatory focus and theories of intelligence were measured and manipulated in order to differentiate participants' goal-oriented state. Two variables are known to be key variables influencing learner's goal orientation, inducing the approach-avoidance strategy and mastery-performance oriented attitude. In the experiment, the control focus was divided into two groups based on the inclination test score (regulatory Focus Questionnaire, RFQ), and TOI(theory of intelligence) was temporally induced through manipulation to confirm the interaction between the two variables. Participants were able to determine the order of learning freely by learning a set of Spanish-Korean word pairs and then selecting the items they would like to re-learn. Word pairs consisted of difficult or easy items, and learners could learn the same word many times if they wanted to. In the results, promotion-incremental group showed allocating difficult word-pairs in early time.

• Journal of The Korean Association For Science Education
• /
• v.44 no.3
• /
• pp.231-248
• /
• 2024

This study developed a chatbot for first-year high school students, employing open-source software and the Korean Sentence-BERT model for AI-powered document classification. The chatbot utilizes the Sentence-BERT model to find the six most similar Q&A pairs to a student's query and presents them in a carousel format. The initial dataset, built from online resources, was refined and expanded based on student feedback and usability throughout over the operational period. By the end of the 2023 academic year, the chatbot integrated a total of 30,819 datasets and recorded 3,457 student interactions. Analysis revealed students' inclination to use the chatbot when prompted by teachers during classes and primarily during self-study sessions after school, with an average of 2.1 to 2.2 inquiries per session, mostly via mobile phones. Text mining identified student input terms encompassing not only science-related queries but also aspects of school life such as assessment scope. Topic modeling using BERTopic, based on Sentence-BERT, categorized 88% of student questions into 35 topics, shedding light on common student interests. A year-end survey confirmed the efficacy of the carousel format and the chatbot's role in addressing curiosities beyond integrated science learning objectives. This study underscores the importance of developing chatbots tailored for student use in public education and highlights their educational potential through long-term usage analysis.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.3
• /
• pp.516-526
• /
• 2004

Polymerization shrinkage of photoinitiation type composite resin cause several clinical problems. The purpose of this study was to evaluate the shrinkage strain stress, linear polymerization shrinkage, compressive strength and microhardness of recently developed composite resins. The composite resins were divided into four groups according to the contents of matrix and filler type. Group I : $Denfil^{TM}$(Vericom, Korea) with conventional matrix, Group II : $Charmfil^{(R)}$(Dentkist, Korea) with microfiller and nanofller mixture, Group III : $Filtek^{TM}$ Z250(3M-ESPE, USA) TEGDMA replaced by UDMA and Bis-EMA(6) in the matrix, and Group IV : $Filtek^{TM}$ Supreme(3M-ESPE, USA) using pure nanofiller. Preparation of acrylic molds were followed by filling and curing with light gun. Strain gauges were attached to each sample and the leads were connected to a strainmeter. With strainmeter shrinkage strain stress and linear polymerization shrinkage was measured for 10 minutes. The data detected at 1 minute and 10 minutes were analysed statistically with ONE-way ANOVA test. To evaluate the mechanical properties of tested materials, compressive hardness test and microhardness test were also rendered. The results can be summarized as follows : 1. Filling materials in acrylic molds showed initial temporary expansion in the early phase of polymerization. This was followed by contraction with the rapid increase in strain stress during the first 1 minute and gradually decreased during post-gel shrinkage phase. After 1 minute, there's no statistical differences of strain stress between groups. The highest strain stress was found in group IV and followed by group III, I, II at 10 minutes-measurement(p>.05). In regression analysis of strain stress, group III showed minimal inclination and followed by group II, I, IV during 1 minute. 2. In linear polymerization shrinkage test, the composite resins in every group showed initial increase of shrinkage velocity during the first 1 minute, followed by gradually decrease of shrinkage velocity. After 1 minute, group IV and group III showed statistical difference(p<.05). After 10 minutes, there were statistical differences between group IV and group I, III(p<.05) and between group II and group III(p<.05). In regression analysis of linear polymerization shrinkage, group II showed minimal inclination and followed by group IV, III, I during 1 minute. 3. In compressive strength test, group III showed the highest strength and followed by group II, IV, I. There were statistical differences between group III and group IV, I(p<.05). 4. In microhardness test, upper surfaces showed higher value than lower surfaces in every group(p<.05).

• Journal of the Korean Wood Science and Technology
• /
• v.2 no.2
• /
• pp.5-7
• /
• 1974

1. This study indicates that above the fiber saturation point the drying rate can be increased with increasing the velocity of the air circutation, i.e., the drying rate of sample boards is proportional to the air velocity, but below the fiber saturation point, the effect of the velocity of air circulation is very low as shown in Figs. 1 and 2. 2. Under the controlled temperature and humidity in the kiln, the more the sample boards have moisture, the higher drying rate of it can be obtained. In other words, this means that even though in the case of drying various moisture content of wood, at the final drying stage, approximately the same percentage of moisture content of wood can be secured by employing the higher velocity of air circulation. 3. This study shows that the rate of drying in kiln changes distinctly at the fiber saturation point, i, e., above the fiber saturation point, the drying curve shows concave aginst the X axsis, but below the fiber saturation point, in the range from 30 percent of moisture content to 20 percent of moisture content, the curve shows convex as shown in Fig. 3. As the drying progresses, however, the drying curve shows concave again below 20 percent of moisture content. This means that inflection point of drying curve may be located clearly at the fiber saturation point, i.e., 30 percent of moisture content. As mentioned above, the 30 percent of moisture content of wood at which the inflectional point appears can be recognized as a critical point, i. e., the fiber saturation point at which all free water was removed from wood. The existence of inflectional point indicates that the evaporation of hygroscopic water in a cell wall is more difficult than the evaporation of free water in a cell cavity and the minor space of cell wall. The convex curve in the range of moisture content from 30 percent to 20 percent means that the evaporation of capillary condensed water has a tendency of the same rates of drying approximately, but as approaching to the 20 percent of moisture, the transfusion of moisture from wood becomes difficult because of having less moisture in cell wall. Below 20 percent of moisture content, the drying curve shows concave again, which means that it is difficult to remove the moisture located nearer to the surface of cellulose molecules and the surface bound water. These relations were revealed in Fig. 4. In comparison AC curve which does not have the two inflection points with BD curve which has two inflection points, i.e., Band D, they are mentioned already, by existence of the inflection points, the curve BD shows that the change of drying rate in the interval from 20 percent of moisture content to 30 percent of moisture content is not greater than in the case of the curve AC in the same interval. At the inflection point of 30 percent of moisture content, it can be noticed that the changing of the drying rate is very conspicuous. This phenomenon also can be recognized, as it is noticed by the Fig. 3, the drying rate from green to 30 percent of moisture content is very great. But the inclination of the curve is very slow from 30 percent of moisture content to 20 percent of moisture content, i.e., the inclination of the curve becomes almost horizontal lines. Acknowledgments Gratitude is expressed to Fred E. Dickinson, Professor of 'Wood Technology, School of Natural Resources, University of Michigan, USA for his suggestion to carry out this study.

• Korean Journal of Environmental Biology
• /
• v.27 no.3
• /
• pp.314-322
• /
• 2009

Vegetation, environmental characteristics and soil analysis of Megaleranthis saniculifolia Ohwi habitats were investigated to propose the basal data for conservation and restoration. M. saniculifolia was distributed around an altitude of 770~1,440 m with an inclination of $0{\sim}20^{\circ}$, and mostly formed discontinuous populations in northern part of valley. The vascular plants from 78 quadrates of 11 habitats were identified 111 taxa. Importance value of M. saniculifolia was 27.05%, and highly ranked 5 species such as Veratrum oxysepalum (5.67%), Corydalis turtschaninovii (5.32%), Aruncus dioicus var. kamtschaticus (4.35%), Meehania urticifolia (4.06%) and Anemone koraiensis (3.91%) were considered to be an affinity with M. saniculifolia. Dominant species of woody plants in 78 quadrates were represented as Cornus controversa, Juglans mandshurica, Quercus mongolica, Acer pseudo-sieboldianum and A. mono in tree (B1) layer, A. pseudo-sieboldianum and Carpinus cordata in subtree (B2) layer, Deutzia glabrata and Prunus padus in shrub (S) layer. Average species diversity was 1.16, and dominance and evenness were found to be 0.12 and 0.81, respectively. Average field capacity was 26.41%, and the organic matter and soil pH were 7.83% and 5.83. Correlation coefficients based on environmental factors, vegetation and soil analysis were showed that the positive correlations between slope degrees and pH, slope degrees and organic matter, dominance and importance value, species diversity and richness, whereas between species diversity and dominance, and importance value and dominance were showed negative correlations.

• Journal of the Korean Society of Radiology
• /
• v.5 no.5
• /
• pp.223-229
• /
• 2011

When negative electron in x-ray tube is accelerated in to a high speed and then the currency of the electron is blocked by the target, x-ray happens by the conversion of the energy. The real area where the fast accelerated electron collides to a target area is called actual focal spot. When the string focused size is observed at the central ray side, where the direction x-ray comes out, the size seems to be reduced. This focus is called effective focal spot. According to radiation angle of x-rays tube, the degree of the negative pole side presents higher value than inclination, the amount of exposed radiation that patient receives differs by the angle of positive pole, which means effective focal spot is the variable. This paper presents the correlation between size of effective focal spot and amount of exposed radiation to the patient by it, and effective research for homogenized dose dispersion by the size of effective focal spot. In conclusion, following the focal size, effective range which was -8cm ~ 0 cm on average, was found and average dose rate was 0.019 R/min. Through this range, for patients with small radiation exposure, image with good density and resolution in aspect of diagnosing will be able to be obtained.

• Journal of the Korean Geosynthetics Society
• /
• v.7 no.3
• /
• pp.41-49
• /
• 2008

This study was carried out the model experiment in laboratory to evaluate the bearing capacity improvement of soft ground as altered constraint condition of reinforcements according to geotextile, georid, steel bar. As a results, the value of BCR was increased linearly as improvement of the stiffness of reinforcements, and the factor governed the increasement of BCR was the increasement of frictions between reinforcement and clay as far as the constrain conditions increased until T=85.6kg. Moreover, An angle of inclination, ${\theta}$, between reinforcement and horizontal surface was distributed from $38^{\circ}$ to $50^{\circ}$ for Geotextile, from $45^{\circ}$ to $50^{\circ}$ for Geogrid and from $14^{\circ}$ to $16^{\circ}$ for steel bar. A radius of heaving, r, of clay ground by vertical weight at side was distributed from 0.6m to 0.7m for Geotextile, from 0.5m to 0.8m for Geogrid, and from 2.4m to 3.0m for steel bar. In case of steel bar, r was 4 times that of Geotextile.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.4
• /
• pp.245-251
• /
• 2013

Purpose: This study was conducted to compare in vivo biofilm formation on titanium surface and zirconia surface. Materials and methods: For biofilm formation on titanium and zirconia in oral cavity, after producing oral appliances using acrylic resin and orthodontic wire tailored to 9 subjects, we made titanium and zirconia specimens ($6mm{\times}6mm{\times}2mm$), fixed them on oral appliances and maintained them in oral cavity of test subjects for 24 and 72 hours. Test subjects who have equipped two pairs of specimens maintained oral hygiene not by using toothpaste but only by tooth brushing. After 24 and 72 hours, we removed and observed specimens through scanning electron microscopy (SEM). Results: Biofilm formation showed large deviation depending on individuals. For formation comparison between titanium and zirconia for 24 hours, zirconia showed less biofilm formation than titanium. Biofilm formation showed large deviation depending on individuals. As for formation comparison between zirconia and titanium, the degree of biofilm formation in zirconia was less than it was in titanium after a lapse of 24 hours. The result of biofilm formation in 72 hours trial show that zirconia has an inclination to formate less biofilm than it was in titanium. Conclusion: Based on the above results, we can conclude that early biofilm formation in oral cavity was influenced by difference of abutment materials.