• The korean journal of orthodontics
• /
• v.10 no.1
• /
• pp.15-27
• /
• 1980

This study was undertaken to compare the craniofacial morphology of Class II, Division 1 malocclusion with that of normal occlusion in children, and to investigate the incidence of various Class II, Division 1 craniofacial skeletal patterns. The subjects consist of thirty seven boys and fifty three girls with Class II, Division 1 malocclusion, and forty six boys and eighty one girls 10-15 years with normal occlusion. Measurements were recorded, tabulated and analyzed on the lateral cephalograms by the degree of SNA, SNB and ANB. The following characteristics of the Class II, Division 1 skeletal pattern were observed. 1. The anteroposterior relationship of the maxilla to the cranium in the Class II, Division 1 was very similar to that of normal occlusion. 2, Mandible of the Class II, Division 1 malocclusion was in the posterior position in relation to the cranial anatomy when compared to normal. 3. The chin point as measured by SN Pog and NS Gn showed distal positioning in relation to normal occlusion. 4. SN to mandibular plane angle was large in Class II, Division 1 malocclusion. 5. Mandibular incisor inclination was not significantly different between Class II, Division 1 malocclusion and normal occlusion, but maxillary incisors inclined and positioned labially and consequently overjet was large in Class II, Division 1 malocclusion. 6. Class II, Division 1 malocclusion was divided into four types of craniofacial skeletal pattern. The most common Class II, Division 1 pattern was found to be type C in which SN-Mand. Pl. was above mean range of normal occlusion. The next frequent pattern was found to be type A in which maxilla and mandible were within normal range of protrusion while upper incisors were severly labially inclined.

• Journal of the Korean Geosynthetics Society
• /
• v.17 no.1
• /
• pp.85-93
• /
• 2018

A existing standard design section of transitional zone between bridge and earthwork section in high speed railway should be designed to gradually change support stiffness from bridge abutment to backfill side that were placed on cemented stabilized gravel, general gravel, soil materials. The larger the backfill slope of the general gravel and soil was more structurally stable, but there is no clear reason about them. In this study, it was compared with settlement and bearing capacity of backfill area in currently design and alternating backfill slope section using large centrifuge tester. As the experimental results, it was showed that the 1:2 slope and 1:1.5 slope have almost similar bearing capacity behavior under the load stage as railway loading level.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.4
• /
• pp.115-122
• /
• 2005

In this paper, a new method composed of discrete element method and genetic algorithm has been introduced to estimate the safety factor and search critical slip surface on slope stability analysis. In case of estimating the safety factor, conventional methods of slope analysis based on the limit equilibrium do not satisfy the overall equilibrium condition; they must make assumptions regarding the inclination and location of the interstice forces. An alternative slope analysis method based on the discrete element method, which can consider the compatibility condition between force and displacement, is presented. Real-coded genetic algorithm is applied to the search for the minimum factor of safety in proposed analysis method. This search method is shown to be more robust than simple optimization routines, which are apt to find local minimum. Examples are also shown to demonstrate the applicability of the proposed method.

• Journal of Environmental Science International
• /
• v.16 no.9
• /
• pp.1011-1018
• /
• 2007

This study was conducted to analysis the ecological characteristics of "Wando HolIy"$(llex{\times}wandoensis)$ which is expecting as a possible ornamental tree with its beautiful leaves, flowers and fruits, and to find special breeding material which have particular characteristics and also provide correct environmental information which are required for commercial cultivation. The hill of Galmoon-Ri, Gunoei-Myon, Jeonnam Province, Korea, were reported as a original habitat of native $llex{\times}wandoensis$. The investigation shows that soil pH of native habitat was 6.18, hardness was 2.39, humidity was 38.6%, direction of slope is SSW, and average inclination was $15^{\circ}. The vegetation around $I.{\times}wandoensis$ is occupied by trees like an Quercus variabilis, Q. serrata, Q. acuta and so on. These are mixed forest of deciduous trees. Tree height reached up to about 12m and its coverage is about 30%. Q. salicina, Camellia japonica, I. integra, Cryptomeria japonica account for sub-tree layer. Tree height is around 8m and coverage is about 20%. Shrub layer was taken by Viburnum furcatum, Callicarpa japonica, Styrax japonica, Eurya japonica, Lindera obtusiloba, Ligustrum japonicum, Smilax china, Cornus walteri etc. Tree height reaches around l.2m and coverage is around 20%. Herb layer includes Trachelospermum asiaticum var. intermedium, Cymbidium goeringii, Dryopteris bissetiana, Disporum viridescens, Disporum smilacinum, Sasa borealis var. gracilis etc. Trachelospermum asiaticum var. intermedium, which are observed in southern evergreen zone, are dominant and its coverage is around 20%. The native habitat was in spoiled condition because of artificial thin out.

• Journal of the Korean earth science society
• /
• v.25 no.6
• /
• pp.409-417
• /
• 2004

This study investigated the effects and development of instruction module using ICT on earth field at elementary school science. The effects by 5th graders appeared as follows; First. ICT-applied teaching method proved to enhance the science teaming achievement regardless of their grades compared to the ordinary one. Second, Instruction module using ICT devoted to improve 'self-directed learning characteristics' at all grades by comparition of the ordinary teaching method. The 5th graders showed the improvements in the fields of' openness', 'self-conception', 'initiative', 'future inclination', 'creativity', 'self-assessment ability' all of which belong to self-directed teaming characteristics. They did not, however, show meaningful effect on improving 'learning eagerness' and 'responsibility' improvement. Thirdly, ICT-applied teaching method proved that it is more effective for developing 'creativity' than the ordinary one at all sample grades. The effectiveness was presented highly at 'fluency', 'originality' all of which belong to creativity. They did not, however, show meaningful effect on improving 'flexibility'.

• The korean journal of orthodontics
• /
• v.6 no.1
• /
• pp.17-24
• /
• 1976

The primary objective of this study was to define the differences that exist. between different sexes on the dentoskeletal framework and the soft tissue profile around the mouth. For the purpose of this study, cephalometric radiographs were obtained from the centric occlusion with closed lip position, through the research on each 42 males and females aged from 17 to 22 years with normal occlusion and acceptable facial appearence. The results were as follows: 1. Maxillary to mandibular relationships. Among the angles formed by the long axis of the maxillary and mandibular anterior teeth, the maxillary and mandibular anterior alveolar bone, and the lower and upper lips (Fig.2), only the angle formed by the lips was more acute in males than in females. The males have a more rounded profile, and the females have a flatter profile in the lower third of the face. The differences is statistically significant for the angle formed by the lips. The fact that the lips have a difference greater than that of teeth or the alveolar bone indicates that the lip position is not entirely due to tooth and bony support. Possibly the thickness of the lips has an influence. 2. Occlusal plane. The occlusal plane was related to the anterior tooth inclination, anterior alveolar bone profile, and the lip contour, both maxillary and mandibular (Fig.3). Only the angle related to lower lip was statistically significant. The females again had the more obtuse angle, indicating a flatter profile than that of the males. 3.Skeletal planes. The angles formed by the anterior maxillary lips, teeth, and alveolar bone with the Frankfort plane and the angles of the mandibular lips, teeth, and, alveolar bone and the mandibular plane were investigated (Fig.4). Results were similar to those from maxillary to mandibular relationships. The results were statistically significant for the upper lip and the lower lip, only. 4. Esthetics. The facial line and the mandibular plane were compared with the esthetic line. These angles were different for the different sexes, but only the latter was statistically significant. This difference may be due to the profile contour of the nose.

• The korean journal of orthodontics
• /
• v.47 no.5
• /
• pp.313-322
• /
• 2017

Objective: Miniscrew-assisted rapid palatal expansion (MARPE) is a means for expanding the basal bone without surgical intervention in young adults. Here, we assessed the differences in dental, alveolar, and skeletal measurements taken before (T0), immediately after (T1), and 1 year after (T2) MARPE. Methods: Twenty-four patients (mean age, 21.6 years) who had undergone MARPE and cone-beam computed tomography at T0, T1, and T2 were included. Changes in the following parameters were compared using paired t-tests: intercusp, interapex, alveolar, nasal floor, and nasal cavity widths; inclination of the first molar (M1) and its alveolus; and thickness and height of the alveolar bone. A linear mixed-effects model was used to determine variables that affected periodontal changes in the M1. Results: MARPE produced significant increases in most measurements during T0-T2, despite relapse of some measurements during T1-T2. The alveolar thickness decreased on the buccal side, but increased on the palatal side. The alveolar crest level at the first premolar moved apically. Changes in the thickness and height of the alveolar bone were affected by the corresponding initial values. Conclusions: MARPE can be used as an effective tool for correcting maxillomandibular transverse discrepancy, showing stable outcomes 1 year after expansion.

• The korean journal of orthodontics
• /
• v.47 no.5
• /
• pp.277-288
• /
• 2017

Objective: Treating Class II subdivision malocclusion with asymmetry has been a challenge for orthodontists because of the complicated characteristics of asymmetry. This study aimed to explore the characteristics of dental and skeletal asymmetry in Class II subdivision malocclusion, and to assess the relationship between the condyle-glenoid fossa and first molar. Methods: Cone-beam computed tomographic images of 32 patients with Class II subdivision malocclusion were three-dimensionally reconstructed using the Mimics software. Forty-five anatomic landmarks on the reconstructed structures were selected and 27 linear and angular measurements were performed. Paired-samples t-tests were used to compare the average differences between the Class I and Class II sides; Pearson correlation coefficient (r) was used for analyzing the linear association. Results: The faciolingual crown angulation of the mandibular first molar (p < 0.05), sagittal position of the maxillary and mandibular first molars (p < 0.01), condylar head height (p < 0.01), condylar process height (p < 0.05), and angle of the posterior wall of the articular tubercle and coronal position of the glenoid fossa (p < 0.01) were significantly different between the two sides. The morphology and position of the condyle-glenoid fossa significantly correlated with the three-dimensional changes in the first molar. Conclusions: Asymmetry in the sagittal position of the maxillary and mandibular first molars between the two sides and significant lingual inclination of the mandibular first molar on the Class II side were the dental characteristics of Class II subdivision malocclusion. Condylar morphology and glenoid fossa position asymmetries were the major components of skeletal asymmetry and were well correlated with the three-dimensional position of the first molar.

• The korean journal of orthodontics
• /
• v.48 no.4
• /
• pp.224-235
• /
• 2018

Objective: The purpose of this study was to compare the skeletal, dental, and soft-tissue treatment effects of nonextraction therapy using the modified C-palatal plate (MCPP) to those of premolar extraction (PE) treatment in adult patients with Class II malocclusion. Methods: Pretreatment and posttreatment lateral cephalographs of 40 adult patients with Class II malocclusion were retrospectively analyzed. The MCPP group comprised 20 patients treated with total arch distalization of the maxillary arch while the PE group comprised 20 patients treated with four PE. Fifty-eight linear and angular measurements were analyzed to assess the changes before and after treatment. Descriptive statistics, paired t-test, and multivariate analysis of variance were performed to evaluate the treatment effects within and between the two groups. Results: The MCPP group presented 3.4 mm of retraction, 1.0 mm of extrusion, and $7.3^{\circ}$ lingual inclination of the maxillary central incisor. In comparison, the PE group displayed greater amount of maxillary central incisor retraction and retroclination, mandibular incisor retraction, and upper lip retraction (5.3 mm, $14.8^{\circ}$, 5.1 mm, and 2.0 mm, respectively; p < 0.001 for all). In addition, the MCPP group showed 4.0 mm of distalization and 1.3 mm of intrusion with $2.9^{\circ}$ distal tipping of the maxillary first molars. Conclusions: These findings suggest the MCPP is an effective distalization appliance in the maxillary arch. The amount of incisor retraction, however, was significantly higher in the PE group. Therefore, four PE may be recommended when greater improvement of incisor position and soft-tissue profile is required.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.21 no.2
• /
• pp.39-46
• /
• 2015

Background: The purpose of this study was to investigate the influence of short-term treadmill walking with high-heeled shoes on electromyography activities of the medial gastrocnemius, lateral gastrocnemius and tibialis anterior in healthy young females. Methods: Fifteen healthy females were recruited for this study. To measure muscle activation, the subjects were asked in random order to walk on a treadmill using either high-heeled shoes or barefoot conditions. The shoe heel height for high-heeled walking was 7 cm. The walking speed on the treadmill was 4 km/h, and the inclination rate of the treadmill was 10%. The subjects performed treadmill walking in the barefoot and high-heeled walking conditions for 5 minutes. Electromyography data were collected from the tibialis anterior, medial gastrocnemius, lateral gastrocnemius, and soleus on both firm and foam surfaces and during eyes-open and-closed conditions while standing. Results: Tibialis anterior activity was significantly different before and after the walking task while standing on a foam surface with eyes closed (p<.05). Conclusion: This finding suggests that the activity of the tibialis anterior may be lowered after high-heeled walking. Therefore, high-heeled shoes contribute to harmful effects at the ankle joints, increasing the risks of falling and musculoskeletal injury.