• Economic and Environmental Geology
• /
• v.10 no.4
• /
• pp.185-198
• /
• 1977

This paper is the result of a petrochemical study on the Jongam granite mass which intruded metasediments of Ogcheon zone, locating about 10km northwest from Miweon town, and the mass is $2.5km^2$ in area. In this study, the granite was petrographically analysed in such ways, modal analysis, myrmekite analysis, petrochemical study analysis and tectonic analysis of joint system. The findings are as follows: 1) The area of the granite distributed is a basin surrounded by metasediments. The granite is magma origin. 2) The major mineral composition of the granite are quartz, plagioclase, microcline orthoclase and biotite, and accessaries are muscovite, sericite, magnetite, zircon and sphene. 3) In triangles of $Qu-K{\cdot}fp-PI$, Bi-Or-Hb+Mt and Qu-Ab-Or, the data point areas are similar to those of the NW zone of D.S. Lee (1971) 4) The granite mass can be divided into three granites; quartz monzonite, granodiorite and biotite granite, by petrological aspect in detail. 5) It shows inverse ratio of content between quartz and plagioclase. 6) The myrmekite-texture of the granite are stem type and dominating in northern part. 7) In the tectonic analysis of joint, the strikes are almost constant in direction, N-S direction of dominant joints 8) The geological age of the granites estimated to be Jurassic in age. 9) According to the mineralogical distribution and joint systen, the intrusion direction of the granite magma was infered as from north to south.

• Economic and Environmental Geology
• /
• v.28 no.1
• /
• pp.53-67
• /
• 1995

Geochemical characteristics of iron-related Ulsan granite was studied in comparison with the Cretaceous granitoids from the metallogenic provinces of copper, lead-zinc and lead-zinc/molybdenum in the Gyeongsang Basin, and the variation of cheminal compositions at the Ulsan granite/serpentinite contact was investigated. Ulsan granite is plotted in the regions of granite and granodiorite of Streckeisen's diagram. It shows differentiation trend of calc-alkali magma, and the magmatic evolution from granodiorite to granite is consistant with the general crystallization path of the Cretaceous the granitoids in Gyeongsang Basin. Differentiation index(D.I.) of Ulsan granite is 86~95, which is higher than those of Jindong granites (D.I.=45~70) and Onjongri granites (D.I.=67~84), and there are differences in the content of some major and trace elements between Ulsan granite and other Cretaceous granitoids. At the Ulsan granite/serpentinite contact $SiO_2$, $K_2O$, $Na_2O$, $Al_2O_3$, Rb, Sr, Ba which are abundant in Ulsan granite decrease toward serpentinite, while T.Fe, MgO, Ni, Cr which are abundant in serpentinite decrease toward Ulsan granite. Therefore, the geochemical characteristics of Ulsan granite is applicable to distinguish iron province from different metallogenic provinces where other Cretaceous granitoids occur in the Gyeongsang Basin, and it is possible to find serpentinite which was intruded by granite on the basis of chemical variations.

• Economic and Environmental Geology
• /
• v.28 no.4
• /
• pp.369-379
• /
• 1995

About forty ore deposits of $CaF_2{\pm}Au{\pm}Ag{\pm}Cu{\pm}Pb{\pm}Zn$ are widely distributed in the Geumsan district and are believed to be genetically related to the Mesozoic Geumsan granitic rocks. Based on their petrogeochemistry and isotopic dating data, the granitic rocks in this district can be classified into two groups ; the Jurassic granitic rocks(equigranular leucocratic granite, porphyritic biotite granite, porphyritic pink-feldspar granite, seriate leucocratic granite) and the Cretaceous granitic rocks(seriate pink-feldspar granite, equigranular alkali-feldspar granite, equigranular pink-feldspar granite, miarolitic pink-feldspar granite, equigranular biotite granite). Spatial distribution of fluorite ore deposits, fluorine contents of granitic rocks and fracture patterns in this district suggest that three granitic rocks(equigranular biotite granite, equigranular pink-feldspar granite, miarolitic pink-feldspar granite) of the Cretaceous period be genetically related to the fluorite mineralization. In these fluorite-related granitic rocks, fluorine is most highly correlated with Cs(correlation coefficient(r)>0.9), and also highly with MnO, U, Sm, Yb, Lu, Zn, Y, Li(r>0.7). Statistically the variation of fluorine in the fluorite-related granitic rocks can be explained in terros of only three elements, such as Lu, CaO and Cs, and the fluorite-related granitic rocks can be discriminated from the fluorite-nonrelated granitic rocks by a linear functional equation of La, Ce, Cs and F($Z_{Ust}=-1.38341-0.00231F-0.19878Ce+0.38169La+0.54720Cs$). Also, equigranular alkali-feldspar granite is classified into the fluorite-related granitic rocks by means of the linear functional equation($Z_{Ust}$).

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.1
• /
• pp.89-96
• /
• 1994

This study is to develop a new composite material, a mixture of epoxy resin and granite aggergates which is called Expoxy-Granite, to overcome the inherent disadvantages of conventional materials commonly used as a bed structure material of long-term dimensional/ thermal stability. Under the various manufacturing conditions which could be formulated through experimental investigation, we have constructed 6 kinds of Epoxy-Granite structure models having one fifth the size of the ultra-precision machine tool bed structure. They are compared with cast iron and pure granite models through the dynamic test and the thermal deformation test. Both in the steel ball dropping test and in the forced vibration test, three types of epoxy-granite models made in this study have shown much better dynamic characteristics than the cast iron model and almost the same characteristics as compared with the pure granite model. In the thermal deformation test the above composite materials have also represented lower thermal displacements in the vertical direction of each model as compared with other specimens. It is therefore seen that the epoxy-granite complsite material can be applied to the construction of high-precision machine tool bed, instead of cast iron or pure granite.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.29 no.4
• /
• pp.247-249
• /
• 2016

In this study, we investigated the color change of the normal light gray granite as the high value color granite. By coating the metal catalyst liquid on the surface of granite stone, the metal particles were penetrated into the granite and the color of granite was changed permanently through the annealing treatment. To increase penetration depth into the granite, we used DC (direct current) bias. Two kinds of bias were used such as DC bias and pulse DC bias. And the penetration time was changed as 30 and 60 min. In all cases, the color granite were successfully obtained. Regardless of the catalyst reaction time, the penetration depth was increased by using the bias treatment. We obtained a penetration depth of 21 mm with the DC pulse bias during 60 min.

• Economic and Environmental Geology
• /
• v.25 no.3
• /
• pp.245-258
• /
• 1992

The variations of certain major and trace elements of the Onjong granite mass was studied on the basis of petrological and geochemical characteristics and compared with those of the Eonyang-Yucheon granite masses in order to investigate the geochemical differences of the granitic rocks in relation to mineralization between Pb-Zn ore district and Pb-Zn-Mo-W ore district in Kyeongsang basin. The Onjong granite mass is classified into granodiorite and monzo-granite, and the Eonyang-Yucheon granite masses into monzo-granite by the Streckeisen's diagram. Between both granite masses there are clear differences in contents of certain major elements and lithophile trace elements. The former have high contents of Ca (2.94%), Mg (1.66%) and Sr (365 ppm), and low contents of K (3.52%), Na (3.51%), Rb (116 ppm), Ba (640 ppm) and Li (18.9 ppm), whereas the latter have high contents of K (4.02%), Na (4.28%), Rb (145 ppm), Ba (695 ppm) and Li (19.3 ppm), and low contents of Ca (1.42%), Mg (0.43%) and Sr (161 ppm). Except for Mo, there are not clear differences in chalcophile trace elements between two granite masses: the Onjong granite mass has higher Mo content (7.1 ppm) lnan that (1.7 ppm) of the Eonyang-Yucheon granite masses, but Pb and Zn contents are similar between the Onjong granite mass (Pb=8.7 ppm, Zn=37.1 ppm) and the Eonyang-Yucheon granite masses (Pb=7.8 ppm, Zn=39.8 ppm). Ca and Sr contents of the Onjong granite mass (Ca> 1.5%, Sr> 270 ppm) are higher than those of the Eonyang- Yucheon granite masses (Ca<1.5%, Sr<270ppm), and Rb/Sr, Rb-Rb/Sr and K-Rb/Sr ratios are clearly distinguishable between the Onjong granite mass(Rb/Sr<0.51, Rb-Rb/Sr>250 and K-Rb/Sr>5.2) and the Eonyang- Yucheon granite masses (Rb/Sr>0.51, Rb-Rb/Sr<250 and K-Rb/Sr<5.0). Thus, variations of certain major and trace elements and ratios are applicable as geochemical index to distinguish the types of mineralization of the ore districts related to the Cretaceous granitic rocks in the Kyeongsang basin.

• Economic and Environmental Geology
• /
• v.9 no.2
• /
• pp.85-106
• /
• 1976

The Bulgugsa acidic igneous rocks of the late Cretaceous age are largely distributed in Busan area, which is located in the southeastern corner of the Korean Peninsula. These igneous rocks comprise in ascending order, felsite, dacitic-rhyolitic welded tuffs, granite porphyry and granitic rocks. The former three members represent the early phase of volcanic activities, so that they are named as Jangsan volcanic rocks. The granitic rocks consist of granodiorite, hornblende biotite granite, Kumjongsan granite, fine grained granite, and Daebyen granite, represent the late phase of igneous activities. The Kumjongsan grainte, the largest pluton of the granitic mass, emplaced between two great vertical faults trending NNE. New chemical analyses of 33 rock samples of these acidic rocks are given. Their chemical compositions are generally similar to those of the late Mesozoic acidic igneous rocks of the northern Ashio mountains, and C-Zone granite group of the Ogcheon geosyncline, with their characteristic variation trends of several oxides. Their chemical compositions also show that $Al_2O_3$ is high value, and differentiation index is high, too. Systematically developing joints in Kumjungsan granite are divisible into two types at least. One is the NS-N $20^{\circ}E$ trendirig, $85^{\circ}{\sim}90^{\circ}$ dipping type of joint system which coincides with the trends of distribution of the granite mass and the dikes intruding this granite. Joints of this type may be cooling joints generated as tension cracks. The other is the $N60^{\circ}{\sim}70^{\circ}W$ or $N40^{\circ}{\sim}60^{\circ}E$ trending type of joint systems. It is considered that. joints belonging to this type may be shear joint occurring under the state of south-north tectonic couple acting at the east and west side of the granite mass. Igneous activities of the the Bulgugsa acidic igneous rocks in Busan area was taken place as. follows, formation of the magma reservoir, eruption and intrusion of felsite, consolidation of vents. and increasing vapor pressure in magma reservoir, eruption of pyroclastic flows, caldera collapse, intrusion of granite porphyry, and intrusion of granitic rocks at the latest stage.

• Economic and Environmental Geology
• /
• v.19 no.2
• /
• pp.123-131
• /
• 1986

This study is focused on petrochemistry and petrogenesis of alkali granite which exposed at northern area of the Uljin mine in NE Korea. The rock is corresponded to the range of alkali feldspar granite and alkali feldspar quartz syenite on IUGS classification and contains characteristic Fe-rich biotite (annite) and sodic alkali amphibole (arfvedsonite). The alkali granite is the hypersolvus one-feldspar granite which is characterized by the absence of plagiclase except as a component of perthite and its normatve An contents are less than 5wt%. The bulk compositions of the alkali granite show reverse trends compared to Daly's. Tuttle and Bowen (1958) experimentally support that properties of the hypersolvus granite indicate that they have crystallized at high temperatures from a magma.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.04a
• /
• pp.150-155
• /
• 2011

It is a wide range of types of building materials. Depending on the flow of time for the increased interest in building appearance of quality new and different materials are being developed. In particular, the case of granite widely used as cladding, recently, China's low-cost stone disguised as a large number of local granite stone as the domestic industry has been a big hit. Therefore, the purpose of study is establishment of the database for granite building exterior materials. For that, the domestic granite and chinese granite are selected. The spectrums of these material are investigated and analyzed.

• Journal of the Korean Society for Precision Engineering
• /
• v.7 no.2
• /
• pp.74-84
• /
• 1990

The machine tool structures for ultra-precision machining muxt be manufactured with materials which have high static and dynamic stiffness, high damping, a long term dimensional and thermal stability. This study aims at the development of new composite material Epoxy-Granite which exhibits the satisfactory characteristics as a material of ultra-precision mchine tool bed. The Epoxy-Granite testpieces that use epoxy resins as a binder and granite particles as a aggregate have been manufactured so as to examine the material properties about mechanical, thermal and damping characteristics. Experiments were carried out to obtain the proper manufacturing conditions of Expoxy-Granite specimens by varying the several testing conditions such as types of epoxy resins, particle sizes of granite and mixture ratio of epoxy resin and aggregate. Also, when Epoxy-Granite was compared with cast iron, GRANITAN which was imported from CMS of U.K. and granite materials, it has exhibited the superior or almost the same mechanical and damping properties and thermal conductivity, except for the thermal expansion.