• Journal of Aquaculture
• /
• v.21 no.4
• /
• pp.339-345
• /
• 2008

Farming of the fleshy shrimp Fenneropenaeus chinensis which is a major cultured species in the west coast of South Korea, has been suffered :trom mass mortality due to disease epizootics including viruses. Since the Pacific white shrimp Litopenaeus vannamei was introduced to Korea in 2003, farming of this species has rapidly increased for years, occupying 62.5% of total cultured shrimp production in 2007. However the studies on L. vannamei culture methods for shrimp farming situations in Korea are very limited. Nursery culture of shrimp larvae has some advantages including increased survival, improved feed efficiencies, enhanced growth performance and reduced grow-out period. In this study, L. vannamei postlarvae (${PL_3}-{PL_{10}}$) with a density of $3,750-9,090/m^3$ were cultured in four raceways under limited water exchange condition for 35 days. Survival was the highest (93.6%) in tank stocked with $4,090/m^3$ and was the lowest in tank with $9,090/m^3$ (58.1 %). Mean body weight at harvest ranged from 0.071 to 0.108 g, and FCR was 0.59-0.70 in all tanks. Concentration of total ammonia nitrogen was increased up to 20 ppm on day 10 in all tanks and thereafter gradually decreased by the third week of culture. Nitrite-nitrogen was rapidly increased from the third week, representing bio-floc condition by developed nitrifying bacterial community. Of the present nursery system some modification of structure and consideration for commercial scale are needed in order to be implemented to shrimp farmers.

• Horticultural Science & Technology
• /
• v.34 no.2
• /
• pp.228-235
• /
• 2016

This study was conducted to determine the yield of cherry tomato (Solanum lycopersicum Mill.) grown at three planting times during the uncultivated period of strawberry. Cherry tomato was planted under condition filled with strawberry dedicated culture medium on a two-story bed with April 20, April 30, and May 10 at 2015. Fruit harvest was completed on July 31. The supply concentration of nutrient solution at the time of transplanting was started as EC $1.2dS{\cdot}m^{-1}$ and it was gradually increased to EC $2.5dS{\cdot}m^{-1}$ after blooming of the first flower cluster. Netherlands PBG solution was supplied for one minute six times per day. The heights of cherry tomato plants planted at earlier were significantly greater than those of tomato plants planted later. The heights of cherry tomato plants grown at the bottom of the bed were greater than those grown in the upper bed. The yield of cherry tomatoes planted on April 20 at the bottom of the bed was greatest with an average of 2,954 g of tomatoes per plant. There were no significant differences in the average weight and sugar content of fruit according to planting times and bed position. The yield of cherry tomato plants planted on April 20 was 18% and 34% higher than that of plants planted on April 30 and May 10. We confirmed to increase the yield of the cherry tomato when early plants planted on two-story bed. These results indicate that farmers can choose the best period of producing cherry tomato during the un-cultivated period of strawberry under two-story bed conditions.

• Journal of Animal Science and Technology
• /
• v.50 no.6
• /
• pp.763-774
• /
• 2008

This study was carried out to investigate the correlation of body measurement type and carcass traits. This study used body measurement type and carcass traits on 1,312 heads of Hanwoo steers tested(24 months) which was from 1997 to 2002 at Hanwoo Improvement Main Center National Agricultural Cooperatives Federation. Body measurement type used the age of 18 months body measurement type, and carcass traits used the results of decision grade of Animal Products Grading Service. Observing the phenotypic correlation between carcass traits and body measurement type from the result, the weight, withers height, and chest width at age of 18 months and carcass weight showed readings of 0.690, 0.483, and 0.506, respectively. Also, eye muscle area and age of 18 months weight and chest width read 0.356 and 0.279, respectively. According to results, that improvements in weight, withers height, and chest width are likely to enlarge the eye muscle area and meat production level. Not only quality improvement but also quantity augmentation affect income and sales of the farmers. As can be seen in this study, improvements of weight, withers height and chest width should always be put to much effort while other body measurement type should be considered continuously too. In order to attain clearer results further studies should be done on body measurement type, which will contribute to the improvements of body measurement type in Hanwoo.

• Journal of Food Hygiene and Safety
• /
• v.35 no.3
• /
• pp.243-251
• /
• 2020

In this study, we investigated pesticide residues in 207 agricultural products distributed by direct trade in the northern area of Gyeonggi Province. A total of 94 general agricultural products and 113 eco-friendly agricultural products collected from local grocers and cooperative stores were analyzed by multiresidue method for 263 pesticides using GC (gas chromatography)/ECD (electron capture detector), GC/NPD (nitrogen phosphorus detector), GC-MS/MS (tandem mass spectrometry), LC (liquid chromatography)/PDA (photodiode array detector), LC/FLD (fluorescence detector), LC-MS/MS. All samples showing pesticide residues were general agricultural products collected from local food stores. The pesticide residue levels of 14 samples (6.8%) were below the maximum residue limits (MRLs) and one of them (0.5%) exceeded the MRLs. Sixteen pesticides were detected from samples of the following produce items: spinach, young cabbage, perilla leaves, mallow, cucumber, chives and water dropwort. The safety of the detected pesticides was assessed by monitoring the daily intake estimate (EDI) and the daily intake allowance (ADI) based on the amount of pesticides detected. The ADI percentage range (the ratio of EDI to ADI) was 0.0134-61.6259% and there was no health risk connected with consuming agricultural products in which pesticide residues were detected.

• Journal of Biosystems Engineering
• /
• v.3 no.1
• /
• pp.47-63
• /
• 1978

This study was conducted to obtain a basic information necessary to assess present rice milling technology in Korea The profiles for milling plants was analyzed by survey work.For the private custom-work mills, which process about 80 percent of domestic rice consumption ,their actual milling test for the identical samples as used for filed mills was conducted. Two rice varieties Japonica and Tongil-type were associated with the experiments. The results are summarized as follows: 1. Analyses for private custom-work mills showed their general aspects as; about 91 percent of the mills belonged to an individual owner ship ; more than 93 percent of the mills was established earlier than 1950 ; about 80 percent of the mills was powered with electric motor; mills having less than two employees were about 75 percent; about 45 percent of the mills provided for warehouse in storing customers cereal grains. 2. The polishers installed in 1,255mills within the surveyed area (7 counties) have been supplied by 44 different domestic manufacturers ;in but about 60 percent of which was supplied by 6major manufacturers. The polishers could be classified into two categories in terms of principles of their polishing actions ;jet-pearler and friction types. About 51 percent of the mills was equipped with the former which has been recognized as giving greater milling recovery than the friction types. 3. Reason for owners of private mills to supplement new machines was due mainly to pgrading their mills to meet the requirements that established by the Government. However, about 60 percent of the mill owners intended to replace with new pearler by their own needs to meet with new high yielding varieties. 4. Processing systems of each previate rice mills surveyed could be classified into three categories, depending upon whether the systems posessed such components as precleaner and paddy separator or not. Only 36.7 percent of mills was installed with both precleanr ad paddy seperrator, 5.0 percent of mills did have neither percleaner nor paddy seperator, and rest of them equipped only one of the two. Hence,it is needed for about 63% of rice miils to be supplemented with these basic facilities to meet with the requirements for the standaized system. 5. Actual milling capacity measured at each field rice mills was shown a wide variation, having range from about 190 to 1,210 kg/hr. The percentages of mills classified according to daily milling capacity based on this hourly capacity were 24.3% for the capacity less than 3 M/T a day; 20.0% for 3-4 M/T; 15.6% for 4-5 M/T; 6.7% for 5-6 M/T; 22.3% for 6-7 M/T; and 11.0% for more than 7 M/T a day. 6. Actual amount of rice processed was about 310 M/T a year in average. About 42% of total milled rice was processed during October to Decembear, which formed a peak demand period for rice mills. The amount of rice milled during January to May was relatively small, but it had still a large amount compared to that during June to September. 7. Utilization rate of milling facility, i. e., percentage of the actual amount of milled rice to the capacity of rice mills, was about 18% on the year round average, about 41% in the peak demand season, and about 10% during June to September. Average number of operating days for mills surveyed was about 250 days a year, and about 21 days a month. 8. Moisture contents of paddy at the time of field mill tests were ranged 14.5% to 19.5% for both Japonica and Tong-i] varieties, majority of paddy grains having moisture level much higher than 1530. To aviod potential reduction of milling recovery while milling and deterioration of milled rice while storage due to these high grain mJisture contents, it may be very important for farmers holding rice to dry by an artificial drying method. 9. Milling recovery of JapJnica varieties in rice mills was 75.0% in average and it was widely ranged from 69.0% to 78.0 % according to mills. Potential increase in milJing recovery of Japonica variety with improvement of mill facilities was estimated to about 1.9%. On the other hand, milling recovery of Tong-il varieties in the field mill tests was 69.8% in average and it ranged from 62% to 77 %, which is much wider than that of Japonica varieties. It is noticed that the average milling recovery of Tong-il variety of 69.8% was much less than that of the Japonica-type. It was estimated th3.t up to about 5.0% of milling recovery for Tong-il variety could be improved by improving the present lo'.ver graded milling technology. 10. Head rice recoveries, as a factor of representing the quality of commercial goods, of Japonica and Tong-il varieties were 65.9% and 53.8% in average, and they were widely ranged from 52% to 73% and from 44% to 65% , respectively. It was assessed that head rice recovery of Japonica varieties can be improved up 3.3% and that of Tong-il varieties by 7.0% by improving mill components and systems.

• Journal of Animal Environmental Science
• /
• v.14 no.3
• /
• pp.201-210
• /
• 2008

Farmers directly spread the livestock manure compost on their arable land as an organic fertilizer. However, there are some difficult problems to solve. first, we are unsure of whether the livestock manure compost can meet the nutritional demand of plant. Second, application of the current powered livestock manure compost to crop land is very difficult work due to heavy weight of compost and its powdered shape. For this reason, this study was carried out to develope high quality pelletized livestock manure compost. In pelletizing process with composted manure, the optimal water content for pelletizing was around 30$\sim$40%. When rice bran was mixed with 5% as a bonding agent on volume basis, the pelletizing effect was remarkably improved. On a dry matter basis, the contents of N and P of manure compost were 1.31%, and 0.58%, respectively. After pelletizing, the contents of compost pelleted were 1.37% and 0.54%, respectively. The same parameters of pelletized compost made by screw type Instrument were 1.37% and 0.53%, respectively. The other hand, N and P content of pelletized compost made by pellet mill type instrument were 1.06% and 0.18%, respectively.

• Journal of Sericultural and Entomological Science
• /
• v.9
• /
• pp.49-66
• /
• 1969

Eri-silkworm is known as a tropical insect where as poly-voltine type in that area. It eats caster oil plant leaves which are cultivated as an every year cultivatable seed oil use in this country, even though it grows for many years in tropical countries. That is why, farmers have freedom for its cultivation in any year if they want. Therefore, eri-silkworm rearing service is flexible for its diet procurment as wish of farmer. The eri-cocoon price or economical fluctuation may be reactable for the rearing work not like as mulberry cocoon. Fortunately, it also eats cynthia tree leaves. Standing from such a easy condition, the authors have studied about this problem since 1963 to develope a culturing method of eri-silkworm rearing in this country and the authors brought out the matters to be produced as an industry scale. Here, the authors summarized their works of the results covering with thirty three work tables. The obtained results are as follows.

• Journal of Bio-Environment Control
• /
• v.13 no.4
• /
• pp.217-225
• /
• 2004

This study was performed to provide the basic knowledge about the mushroom cultivation facilities. Classified current status of cultivation facilities in Gyeongnam province was investigated by questionnaire. The structure of Pleurotus eryngii cultivation facilities can be classified into the simple and permanent frame type. The simple frame structures were mostly single-span type, on the other hand, the permanent frame structures were more multi-span than simple structures. And the scale of cultivation facilities was very different regardless of structural type. But as a whole, the length, width and ridge height were prevailing approximately 20.0 m, $6.6\~7.0m$ and $4.6\~5.0m$ range, respectively. The floor area was about $132\~160\;m^2$, and floor was built with concrete to protect mushrooms from various harmful infection. The roof slope of the simple and permanent type showed about $41.5^{\circ}\;and\;18.6\~28.6^{\circ}$, respectively. The width and layer number of growing bed for mushroom cultivation were around $1.2\~1.6m$, 4 layers in common, respectively. Most of year round cultivation facilities were equipped with cooler, heater, humidifier, and ventilating fan. Hot water boiler was the most commonly used heating system, the next was electric heater and then steam boiler. The industrial air conditioner has been widely used for cooling. And humidity was controlled mostly by ultra-wave or centrifuging humidifier. But some farmers has been using nozzle system for auxiliary purpose. More then $90\%$ of the mushroom house had the independent environment control system. The inside temperature was usually controlled by sensor, but humidity and $CO_2$ concentration was controlled by timer for each growing stage. The capacity of medium bottle was generally 850 cc and 1100cc, some farms used 800 cc, 950 co and 1,250 cc. Most of mushroom producted has been usually shipped to both circulating company and joint market.

• Journal of Mushroom
• /
• v.11 no.1
• /
• pp.41-45
• /
• 2013

This study was carried out to improve standardization of agricultural products and investigate quality changes during preservation at various treatments. The standardization does much to improve merchantable quality, distribution efficiency and fair dealings by shipping of the standard agricultural products. Mushrooms notified as the standard are five; Pleurotus ostreatus, Pleurotus eryngii, Flammulina velutipes, Agaricus bisporus and Ganoderma lucidum. But many farmers are suffering from strict standards. Therefore, modification of these standards is required to fit farmhouse situations. Fruit-body weight of A, B and C grades of the marketed Agaricus bisporus was 19.3g, 12.2g and 10.4, respectively. Average pileus diameter of A grades was 43.3mm but B and C grades did not show significant difference. Average stipe length of A, B and C grades was 9.8mm, 13.1mm and 11.6mm, and stipes thick was the highest in A grades. The weight loss rate of stipe cutting of Agaricus bisporus was 12.6% in harvested mushrooms and the rate of stipe cutting length was 60.8%. The diameter of Agaricus bisporus stored for 5 days was 3.5~4.5cm but decreased rapidly in 15 days. The weight loss rate of the high temperature samples lowered rapidly than that of the low temperature samples. Conversely, the L value of the low temperature samples was higher than that of the high temperature samples.

• Journal of Mushroom
• /
• v.14 no.4
• /
• pp.202-206
• /
• 2016

Oyster mushrooms are widely cultivated and consumed in Korea. P. ostreatus 'Suhan(ASI 2504)' is an ideal cultivar for mushroom farmers due to its dark pileus and thick stipe; however, as it is very sensitive to environmental conditions, an alternative cultivar is required. To develop a new cultivar, parental strains 'Suhan(ASI 2504)' and 'ASI 0665 (Heuktari)' were selected from various collected strains according to morphological characteristics. P. ostreatus 'Soltari' was developed by DiMon crossing between the dikaryotic strain 'Suhan' and the monokaryotic strain derived from 'Heuktari'. Thirty-eight of the 100 crossed strains were selected following analysis of mitochondrial genetic characteristics, and 'Soltari' was ultimately selected by continuous cultivation tests. The mitochondrial DNA profile of 'Soltari' was found to be the same as that of 'Heuktari, and a nuclear DNA profile of 'Soltari' was similar as those of the parental strains, 'Suhan' and 'Heuktari.' 'Soltari' mycelium grows adequately in moderate to high temperatures of $12-20^{\circ}C$, although its optimum temperature was found to be $30^{\circ}C$. Fruiting body production per 1.1-L cultivation bottle was approximately 158.8 g. Its stipe length and thickness were comparable to those of diameter and thickness were somewhat lower (42.72 vs. 51.33 mm and 18.18 vs. 22.46 mm, respectively). 'Soltari' was found to be more resistant to high $CO_2$ atmosphere than 'Suhan', and the color of the pileus of 'Soltari' was dark gray at high temperature. Therefore, it is suggested that this new cultivar 'Soltari' is a good alternative cultivar and will contribute to energy saving in oyster mushroom farms.