• Journal of the Korean Wood Science and Technology
• /
• 제14권2호
• /
• pp.36-42
• /
• 1986

Both the control and heated specimen of oak, hornbean, alder, poplar, red pine and pitch pine among domestic commercial species and taun imported were used for radial and tangential shrinkage and movement that occurred on changing the relative humidity of the atmosphere from 90 percent to 60 percent at $25^{\circ}C$. The results of this study were as follows. 1. The radial and tangential shrinkage of the control and heated hornbean and oak wood, except alder, of high specific gravity showed greater than species with low specific gravity. The ratio of tangential to radial shrinkage was 1.46 for taun to 2.70 for alder. Green volume specific gravity of the heated and soaked specimen of all species except poplar decreased 1.5 to 3.1 percent. Shrinkage of the heated specimen increased more than that of the control specimen, and antishrink efficiency of all timbers except alder had negative value. Shrinkage from green to air dry of treated specimens increased more than case of total shrinkage, and radial shrinkage of those specimen increased greater than tangential shrinkage. 3. The movement of the heating specimen for 120 hours decreased than those of the control and the heating specimen for 240 hours. The movement of heating oak, poplar, red pine and pitch pine (or 240 hours increased rather than those of the control specimen.

• Journal of the Korean Wood Science and Technology
• /
• 제20권4호
• /
• pp.43-48
• /
• 1992

A database system for retrieving the information on wood collections was developed using the D-BASE III Plus program for personal computers. Basic information of biological, physical, chemical and technological properties was added to the data which used to be employed in simple card systems, such as identification number, species name and collection site. All information was fast and reliably retrievable. This paper also discussed the results of a survey on wood collections housed at domestic colleges and research institutes.

• Journal of the Korean Wood Science and Technology
• /
• 제44권1호
• /
• pp.48-56
• /
• 2016

이 연구에서는 환경부하가 적은 산림훼손지 생태복원용 단위격자틀을 개발하기 위하여 콘크리트와 국내산 침엽수 4종과 활엽수 3종을 각각 복합적층한 7종류의 목재-콘크리트 복합적층재를 제작하였고, 정적 휨 강도성능에 미치는 수종의 밀도의 영향을 조사하였다. 목재-콘크리트 복합적층재의 휨 탄성계수는 전반적으로 수종의 밀도에 비례하여 증가하였고, 대부분 콘크리트에 비해 높은 휨 탄성계수를 나타내어 복합적층에 의한 밀도감소와 탄성계수향상의 효과가 나타났다. 휨 탄성계수 실측치는 각 라미나의 탄성계수로부터 등가단면법을 이용하여 계산한 예측치보다 약간 낮은 값을 나타내었고, 그 차이는 10% 미만인 것이 확인되었다. 목재-콘크리트 복합적층재의 휨 비례한도 응력은 콘크리트보다 1.2-1.6배의 높은 값을 나타내었다. 목재-콘크리트 복합적층재의 휨 강도는 전반적으로 수종의 밀도에 비례하여 증가하였고, 복합적층에 의해 콘크리트의 그것보다 현저한 강도향상을 나타내어 목재-콘크리트 복합적층재는 환경부하가 적으면서 내구성을 지닌 생태복원용 재료로 응용가능 할 것으로 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• 제51권5호
• /
• pp.419-430
• /
• 2023

In this study, the floor impact sound insulation performance of Korean domestic Cross-Laminated Timber (CLT) slabs was evaluated according to their joint types, species and thicknesses in laboratory experiments. The sound insulation performance of the CLT has not been investigated before, thus, this study was conducted to quantify basic data on floor impact sound insulation performance of CLT slabs. 5-ply and 150 mm thick CLT panels made of 2 species, Larix kaempferi and Pinus densiflora, were used for the study. The CLT panels were assembled by 3 types of inter-panel joints to form floor slabs: spline, butt and half-lap. And the 150 mm thick Larix CLT slabs were stacked to the thicknesses of 300 mm and 450 mm. The heavy-weight floor impact sound insulation performance of the 150 mm CLT slabs were evaluated to be 70 dB for the Larix slabs and 71.6 dB for the Pinus slabs, and the light-weight floor impact sound insulation performance, 78.3 dB and 79.6 dB, respectively. No significant difference in the sound insulation performance was found between the slabs of the 2 species or among the 3 types of joints. The reduction of 1 dB in the heavy-weight floor impact sound and 1.6 dB in the light-weight floor impact sound per 30 mm increase in thickness were confirmed through the experiments. This study can be viewed as the basic research for the evaluation of floor impact sound insulation performance of CLT.

• Mycobiology
• /
• 제47권4호
• /
• pp.430-440
• /
• 2019

Fungal contamination of built-in furniture is a frequent problem in Korea when new apartment is built. However, domestic information on the contaminating fungi is very limited. This study was conducted to isolate, identify and characterize the fungi of the problem in one of the apartment houses where the fungi were claimed in the built-in furniture before the house owner moves in. Fungi present in the furniture installed in a main room, dress room, and kitchen side were visually and microscopically confirmed and purely isolated on PDA. The isolated fungi were identified by analyzing the morphological characteristics and nucleotide sequence of the ITS, calmodulin gene, and TEF-1α gene. Aspergillus creber, A. niger, A. pseudoglacus, A. ruber, Cladosporium perangustum and Penicillium commune were identified. Four out of the six fungal species were positive for at least one enzyme in six kinds of extracellular enzyme assays. When these four species (A. creber, A. niger, C. perangustum and P. commune) were inoculated onto four kinds of wood chips of furniture materials, they were able to colonize all of the wood chips. Their settlement was better at 95% humidity condition than at 30% humidity condition. Among the four species, C. perangustum caused the darkest discoloration and secreted the most number of extracellular enzymes. The four species were re-isolated from the colonized wood chips and confirmed as the problematic fungi in the built-in furniture.

• Journal of the Korean Wood Science and Technology
• /
• 제18권4호
• /
• pp.26-40
• /
• 1990

The plane trees(Platanus occidentalis L.) have been grown in Korea very widely as ornamental garden or street trees but they have not been used as manufacturing materials The proportion of imported wood has been now over 85% of raw materials needed in the wood industry, and therefore, many of studies on the substitution of domestic wood for imported wood and on the increasing the utilization rate of domestic species have been attempted and considered as very important projects to solve. From a this point of view, this study was carried out to investigate solid wood bending properties of plane trees and then to develop their end-uses, and the size of specimens tested was $15\times15\times350mm$ for steaming treatment and they were dried to $15\pm1%$ before bending. The results obtained were as follows: 1. The optimum conditions for solid wood bending processing of Platanus occidentalis are showed in Table 7. 2. The minimum solid-bending radii of Platanus occidentalis were 40mm in steaming treatment. 3. The effect of knots, diagonal grain and decay on the degradation of bending processing properties were very severe. 4. The bending stress was setted successfully through $80^{\circ}C$-15hrs drying after bending and the spring back for 24hr-exposing time was only about 1%.

• Journal of the Korean Wood Science and Technology
• /
• 제39권6호
• /
• pp.521-530
• /
• 2011

구조용 집성재의 시장 수요가 확대되고 다양화되면서 교량이나 파고라와 같이 외기에 노출되는 조건에서 사용하기 위한 고 내구성 구조용 집성재에 대한 시장 요구가 증가할 것으로 예견된다. 따라서 본 연구는 국산 침엽수재로 제조되는 구조용 집성재에 적합한 방부처리 기술 및 기준을 개발하기 위한 목적으로 진행되었다. 본 연구에서는 방부처리된 국산 리기다소나무 제재목을 이용하여 구조용 집성재를 제조하고 제조 단계별 생산수율과 KS 품질기준 충족여부를 평가하였다. 방부집성재의 제조수율은 일반 집성재와 큰 차이를 나타내지 않았으며, 목재자원의 효율적인 활용을 위해서는 집성재 제조수율 향상방안과 함께 부산물에 대한 효율적 활용방안도 함께 검토되어야 한다. 리기다소나무 방부처리재의 경우 불균일한 방부약제 흡수량으로 인하여 구조용 집성재 제조용으로 적합하지 않은 것으로 확인되었으며, 집성재 제조 후에 유용성 방부제를 처리하는 방안에 대한 추가적인 검토가 요구되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제12권1호
• /
• pp.11-30
• /
• 1984

본(本) 연구(硏究)는 한국산(韓國産) 단판수종(單板樹種)의 목재특성(木材特性)을 조사(調査)하여 합판공업(合板工業)에 필요(必要)한 기초자료(基礎資料)를 제공하기 위해 실시(實施)하였다. 최근(最近) 목재자원(木材資源)이 점차 고갈(枯渴)되어 외재(外材)의 도입사정(導入事情)이 악화(惡化)됨에 따라 합판공업(合板工業)에 한국재(韓國材)의 활용(活用)을 증진(增進)시키고 그 가공기술(加工技術)을 발전(發展)시킴에 있어서 단판수종(單板樹種)의 목재특성(木材特性)에 관(關)한 연구(硏究)는 우선적으로 취급되어야 할 것이다. 본(本) 연구(硏究)에서 이들 취급(取扱)된 단판수종(單板樹種)은 우리 나라에 생장(生長)하고 있는 33개(個)의 속(屬)으로부터 50개(個)의 경제수종(經濟樹種)을 선정(選定)하였으며 이들 수종(樹種)에 대하여 주로 육안적(肉眼的) 목재특성(木材特性)을 조사(調査)하여 수종별(樹種別)로 기재(記載)하였고 이를 바탕으로 하여 침엽수재(針葉樹材) 및 활엽수재별로 목재식별(木材識別) 검소표(儉素表)를 간략(簡略)하게 작성(作成)하여 보고(報告)한다. 본(本) 연구(硏究)에서 육안적(肉眼的) 특성(特性)에 따른 식별(識別) 원표(圓表)를 작성(作成)하고 이를 바탕으로 하여 우리나라산(産) 단판수종(單板樹種)의 육안적(肉眼的) 식별(識別) 검소표(儉素表)를 나타내면 다음과 같다.

• 한국축산식품학회지
• /
• 제18권1호
• /
• pp.42-49
• /
• 1998

The contents of holocellulose, one of the main components of the wood, were 83.9% in oak wood and 76.9% in apple wood, respectively. Those of hemicellulose were 16.41 and 20.33%, and in lignin 23.0 and 19.7%, respectively. Six species of domestic oak wood and apple wood were considered to be suitable for smoking materials due to the low content of lignin. Benzo(a)pyrene contents in smoke flavoring prepared with oak wood at 150, 400 and 500$^{\circ}C$ were 0. 4, 3. 7 and 5.6$\mu\textrm{g}$,/kg, respectively. The amounts of phenanthrene were 112.7, 131.4 and 255.9$\mu\textrm{g}$/kg, respectively, in each temperature. The amounts of polycyclic aromatic hydrocarbons(PAH) in smoke flavory were in the order of phenanthrene＞anthracene＞pyrene＞benzo(a)anthracene＞chrysene＞benzo(b)fluoranthens＞benzo(a)pyrene Benzo(a)pyrene contents in smoking extracts prepared with apple wood at 150, 400 and 500$^{\circ}C$ were 0.4, 3.3 and 5.5$\mu\textrm{g}$/kg, respectively. Phenanthrene contents in those samples were 72.7, 100.2 and 220.5$\mu\textrm{g}$/kg, respectively. Contents of each PAH showed the same order as in oak wood.

• Journal of the Korean Wood Science and Technology
• /
• 제38권3호
• /
• pp.199-204
• /
• 2010

전통공법에서는 주로 소나무를 수가공하여 구조부재로 사용하고 있다. 주먹장 접합(이음, 맞춤)은 일반 가구나 구조부재의 접합에 사용되고 있으며, 수가공이나 간단한 기계가공에 의해 쉽게 가공할 수 있는 이점이 있다. 비록 외관상 선형적인 가공이 주를 이루지만, 손쉬운 짜맞춤이 될 수 있어야 하는 고도의 가공정밀성이 요구된다. 더욱이, 장부와 장부받이는 틈새없는 긴결한 접합이 이루어져야 한다. 주먹장접합부에 대한 과학적인 연구는 체계적으로 수행된 예가 많지 않으므로 전통공법과 국산재 활용이라는 관점에서 낙엽송집성재를 기계가공하여 이용하였다. 통주먹장이음 접합부의 인장성능을 파악하기 위하여 150 mm 정각 낙엽송 집성재를 사용하였으며, 내력성능에 영향을 끼치는 주먹장의 다양한 기하학적 요소(장부 너비, 길이, 각도)에 대해 조사하였다. 보강목을 설치하지 않은 시험편은 장부받이(장부홈)의 모서리부에서 할렬이 발생하며 내력도 낮게 나타났다. 기둥머리의 화통맞춤 및 주두와 같은 상황을 고려한 보강시험편은 최대인장내력에서 2배 이상의 성능을 발휘하였다. 장부의 적정각도는 25도 수준이었으며, 어깨폭의 변화와는 상관성이 없는 것으로 나타났다.