• 한국방재안전학회논문집
• /
• 제14권1호
• /
• pp.1-8
• /
• 2021

주름관은 자체의 신축성으로 변형에 의한 파손에 대응하고 설비의 편리성으로 인해 소방장비, 스프링클러 배관 등에 널리 사용된다. 그러나 벽의 주름진 형상으로 인해 복잡한 내부 난류유동이 발생하게 되며, 파이프 유동에 중요한 설계인자인 압력강하의 예측이 어렵다. 주름관 내의 압력강하에는 그루브 높이, 길이, 피치 등 파이프 벽의 형상 인자가 영향을 준다. 기존의 연구에는 관 내의 사각형 그루브의 피치(P)와 높이(K)의 비가 5 보다 작은 D형관의 경우에 대하여 길이 변화에 따른 압력 강하에 관하여 연구한 사례가 있다. 본 연구에서는 길이와 높이 변화를 고려한 P/K가 2.8, 3.5, 4.67의 경우 유동의 Re 수가 55,000, 70,000, 85,000인 경우에 대해 압력강하에 대한 수치해석 연구를 수행하였고, 주름관 내의 압력강하는 P/K 가 작을수록 감소하는 것으로 해석되어 압력 강하가 그루브 가로 세로 비율의 변화에 영향을 받고, 그루브 높이가 증가하면 재순환 면적이 증가하기 때문에 영향을 받는다는 것을 보여주었으며, 레이놀즈 수가 클수록 압력 강하가 증가하는 결과를 얻었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권2호
• /
• pp.31-37
• /
• 2000

This study investigated heat transfer characteristics of refrigeration system using new type aluminium heat transfer tube for evaporator of refrigeration and air-conditioning comparing with bare tube. From the result of heat transfer experiment form one phase flow using cooled and hot water, about 20% heat transfer performance is superior in case of same quantity of flow and about 4% heat transfer performance if superior in case of same velocity comparing with bare tube. Casing of two phase flow, heat transfer performance of new type aluminum heat transfer tube shows about 50% superior heat transfer performance comparing with bare tube in the same evaporating pressure when using heat transfer tube as evaporator and shows about 47% increase when expressing performance coefficient as the rate of refrigerating capacity and compressing work. However, it can be known that pressure drop in the heat transfer tube is taken higher value of about 18% in case of new type aluminum heat transfer tube. From the above result, new type aluminum heat transfer tube is excellent comparing with bare heat transfer tube using the existing heat exchanger for refrigerator.

• 공학교육연구
• /
• 제24권2호
• /
• pp.51-60
• /
• 2021

Although more than 15 years have passed since the introductory design courses were opened due to the introduction of engineering education certification in the civil engineering field, these courses have been operated somewhat unsatisfactorily compared to their importance as an introductory course for engineering design. This is partially because the quality of classes is affected by the instructor's individual ability due to the fact that a standard training plan for these courses has not been established so far. Therefore, in this paper, we try to present a reference model for the introductory design course by introducing a class operation case established through continuous improvement process over the last 10 years at Chungbuk National University. This case aims to cultivate students' problem solving and system design skills by carrying out projects to develop egg drop and wood bridge systems based on creative problem solving methodologies. As a result of a questionnaire survey conducted after the class, we found that students' problem solving and system design capabilities were improved significantly and there was a meaningful increase in level of interest and attention in civil engineering by taking this class.

• 동의생리병리학회지
• /
• 제30권5호
• /
• pp.360-365
• /
• 2016

The purpose of this study is to suggest a possibility of the Korean medical treatment in patient with peroneal nerve palsy, and to suggest importance of differential diagnosis of foot drop. Peroneal nerve pasly was diagnosed by lumbar spine magnetic resonance imaging(MRI) and electromyogram(EMG). The patient was treated with acupuncture, herbal medicine, bee-venom acupuncture and moxibustion from March 7th to May 2nd. We measured Numerical Rating Scale(NRS), Range of Motion(ROM) of the ankle, and observed the change in body temperature using Digital Infrared Thermal Imaging(DITI). After received Korean medical treatment, the patient showed improvement in all the scales mentioned above. The result showed that Korean medical treatment is effective in peroneal nerve palsy before operation.

• 대한교통학회지
• /
• 제23권5호
• /
• pp.73-81
• /
• 2005

기존의 삼각교통섬은 일반적으로 우회전차로와 직진차로의 분리를 위하여 포장면 상단에 연석 등을 이용하여 돌출된 시설물을 사용한다. 그러나, 기존의 삼각교통섬을 좁은 차로의 교차로에 설치할 경우, 대형자동차가 좌회전시 대향 차로를 침범하여 대향 차로에 대기하는 자동차와 충돌할 가능성이 높다. 따라서 대향 차로를 분리하여, 대형자동차가 교차로 회전시 대향 차로를 침범하는 것을 방지해야 할 필요가 있다. 본 연구는 우리나라 여건에서 기존의 삼각교통섬만으로 이루어진 평면교차로와 물방울교통섬이 추가된 평면교차로를 비교하였다. 먼저, 안전성 측면에서 대형자동차의 회전궤적을 고려하여 물방울교통섬의 설치위치 및 형태를 결정하는 방법을 제시하였으며, 운전자 및 주행 쾌적성, 보행자, 확폭량, 경제성측면에서 물방울교통섬이 기존 삼각교통섬에 비해 상대적으로 우위에 있음을 분석하였다.

• 비파괴검사학회지
• /
• 제16권2호
• /
• pp.86-94
• /
• 1996

파괴역학을 기초로 한 구조물의 수명 관리와 안전성 평가에 있어서, 결함의 크기는 매우 중요한 변수인자이다. 집중유도형 교류전위차법(ICFPD)은 구조물 부재의 표면, 이면 및 내면에 존재하는 결함을 검출하고, 그 크기를 측정하기 위하여 개발하였다. 본 비파괴법의 원리는 교류 전류가 흐르는 하나의 도선에 의하여 국부적인 영역에 전류를 집중적으로 유도하는 것을 이용하였다. 도선에 흐르는 전류는 일정 크기와 주파수를 갖는다. 금속표면에 유도된 전위는 탐촉자에 설치된 전위측정용 단자(potential pick-up pins)로 측정한다. 본 논문은 집중유도형 교류전위차법을 이용하여 평판 시험편에 도입한 표면결함과 이면결함을 평가하였다. 표면결함의 경우, 전위차 분포는 결함의 경사도에 따라 변화하고, 결함부와 결함단부의 전위차는 결함의 경사도 및 깊이에 따라 변화한다. 이면결함의 경우, 전위차 분포는 표면결함의 전위차 분포와 구분이 되며, 결함부에서의 전위차는 결함의 깊이에 따라 변화한다.

• 한국산업보건학회지
• /
• 제27권4호
• /
• pp.283-290
• /
• 2017

Objectives: This study aimed to evaluate the relationship between filter replacement and filter performance change in particulate filters used in the workplace. Methods: Three types of particulate respirator filters are mainly used in the workplaces. These were tested against the filter performance safety certification standard for dust masks established by the Ministry of Employment and Labor(MoEL). Used filters were collected to test their performance, such as filter pressure drop, efficiency, and quality factors. All these factors were evaluated by a filter tester. To compare filter performance between used and new ones, the same kinds of new filters were also tested together under the same procedures. Results: A total of 270 used filters were collected for testing. The main reasons to replace the filters were difficulty in breathing(46.2%), dirty/odor influx(19.7%), and a combination of factors(26.7%). The pressure drop for two special class groups was significantly different(new filters: $20.72{\pm}3.33mmH_2O$; used filters: $24.70{\pm}5.26mmH_2O$, p<0.0001). In the case of penetration, new filter groups indicated $0.0032{\pm}0.0040%$, while that of the used filters was $0.0596{\pm}0.1187%$. The quality factor for the used filters($0.34{\pm}0.09$) significantly decreased compared to the new filters($0.53{\pm}0.08$) (p<0.0001). Conclusions: Filter performance including pressure drop, penetration, and the quality factor was evaluated and compared between new and used filters in the workplace. The results showed that general filter performance deteriorated more for change of pressure drop, penetration and the quality factor.

• 한국항공우주학회지
• /
• 제32권5호
• /
• pp.24-29
• /
• 2004

본 논문에서는 저속통제기로부터 비상 시 분리되는 외부연료탱크 및 LAU-131 로켓발사기의 분리안전성을 보이기 위하여 수행한 자유낙하 풍동시험, MSAP을 이용한 해석과 비행 시험의 연구결과를 종합하였다. 자유낙하형의 bomb rack을 사용하는 비행시험 중의 분리안 전성의 확인과 MSAP의 보정용 자료 생성을 위하여 수행한 아음속풍동을 이용한 자유낙하 시험의 결과에 대하여 기술하였다. 보정된 MSAP으로 자유낙하형과 사출형의 bomb rack 을 사용하였을 때의 분리안전성 해석을 수행하였다. MSAP 해석 결과를 이용한 상관관계 해석을 통하여 자유낙하형의 bomb rack을 사용할 경우의 투하 안전성도 보였다. 또한, 실기 비행시험을 통하여 투하시험을 수행하였으며 이를 해석결과와 비교하였다. 마지막으로, 풍동 시험, 해석결과 및 비행시험의 결과를 종합하여 저속통제기의 안전투하영역을 확정하였다.

• 한국지열·수열에너지학회논문집
• /
• 제14권4호
• /
• pp.20-26
• /
• 2018

In this study, the performance characteristics of a welded plate heat exchanger was investigated experimentally. Performance tests were carried out according to the flow rate and inlet temperature of working fluid. As a result, the heat transfer capacity increased by 335.5 kW with an increasing the flow rate and temperature difference between hot and cold side. However, the overall heat transfer coefficient was increased with the increase of flow rate, and it was not effected significantly from inlet temperature difference between hot and cold working fluid. The pressure drop was increased by 55.78 kPa with an increasing the frow rate when the flow rate ratio between hot and cold side 1:1. However, the tendency of pressure drop was difference when flow rate ratio wasn't 1:1. In case that the flow rate ratio between hot and cold side was not 1:1, the pressure drop at the low flow rate side was higher than that when the flow rate ratio was 1:1, while pressure drop of the other side was decreased compared to that when the flow rate ratio was 1:1.

• Journal of Mechanical Science and Technology
• /
• 제18권12호
• /
• pp.2284-2293
• /
• 2004

The evaporation heat transfer coefficient h$\_$r/ and frictional pressure drop Δp$\_$f/ of refrigerant R-134a flowing in the oblong shell and plate heat exchanger were investigated experimentally in this study. Four vertical counterflow channels were formed in the oblong shell and plate heat exchanger by four plates of geometry with a corrugated sinusoid shape of a 45 chevron angle. Upflow of refrigerant R-134a boils in two channels receiving heat from downflow of hot water in other channels. The effects of the refrigerant mass flux, average heat flux, refrigerant saturation temperature and vapor quality of R-134a were explored in detail. Similar to the case of a plate heat exchanger, even at a very low Reynolds number, the flow in the oblong shell and plate heat exchanger remains turbulent. The results indicate that the evaporation heat transfer coefficient h$\_$r/ and pressure drop Δp$\_$f/ increase with the vapor quality. A rise in the refrigerant mass flux causes an increase in the h$\_$r/ and Δp$\_$f/. But the effect of the average heat flux does not show significant effect on the h$\_$r/ and Δp$\_$f/. Finally, at a higher saturation temperature, both the h$\_$r/ and Δp$\_$f/ are found to be lower. The empirical correlations are also provided for the measured heat transfer coefficient and pressure drop in terms of the Nusselt number and friction factor.