• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.205-209
• /
• 2009

Wetting properties between silver-copper-titanium braze alloys with different titanium contents up to 2.8 mass% and hexagonal boron nitride ceramics were investigated using sessile drop method at 1123K in Argon. The final contact angle is less than $30^{\circ}$ when the Ti content was over 0.41 mass%. Meanwhile, the contact angle curves show different behavior. In case of using braze alloy containing 2.8 mass% of titanium, the initial contact angle is acute angle just after the melting of braze. In case of brazes containing titanium less than 2.26 mass%, the contact angle is larger than $90^{\circ}$ at the beginning and slowly decreases to acute angle. The reaction layer of titanium nitride is observed at the interface. In addition, the reaction of Ti in the braze and N in the bulk h-BN seemed to show diffusion limited spreading.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.959-965
• /
• 2009

To meet the demand increasing passengers in railway vehicles, railway transportation service companies are increasing the numbers of cars per train-set. Two solutions, Variable train-set formations and Multiple train-set operation, are common way to increase the transportation capability. These kind of long distance train-set can effect train-set command and control system, and sometimes the digital signals using train line from master cabin can not reach to the systems located the other extremity slave car. This is so called Voltage Drop. This phenomenon is originated from the electrical power consumption and electrical cable resistance, and cause to the equipments or cars located end of the electrical cable way, malfunction or abnormal operations. This voltage drop happens not only in train lines but also Battery Power Lines. The purpose of this investigation is to design high reliability railway vehicles by clarifying the possibility of happening these events case by case, by analyzing the reasons, and finally by finding the best solutions.

• 대한환경공학회지
• /
• 제22권4호
• /
• pp.639-650
• /
• 2000

여과집진장치의 중요 문제점 중의 하나인 높은 압력손실을 해결하기 위해 하부유입식 원심 여과집진장치의 특성을 실험적으로 분석하는 것이 본 연구의 주목적으로, 실험은 원심 여과집진장치의 집진효율과 압력손실(특히, 여과포 압력손실) 특성을 일반 여과집진기와 비교 분석하기위해 유입유속, 유입농도 및 선회영역의 변화 등과 같은 다양한 파라메터들에 대해 수행하였다. 실험 결과, $1{\mu}m$ 이하의 서브마이크론 입자들에 대해서 접선유입식이 중앙유입식의 경우 보다 높은 집진효율을 보였으며, 총괄집진효율은 99% 이상을 나타내었다. 유입농도 $100mg/m^3$에서, 압력손실 감소율은 유입유속에 따라 large bag의 경우 15~38%인 반면, small bag의 경우 선회영역의 증가에 의해 30~48%이었다.

• 마이크로전자및패키징학회지
• /
• 제16권1호
• /
• pp.33-38
• /
• 2009

전자 기기 제품들이 소형화 및 휴대화 되면서 낙하충격 신뢰성에 대한 관심이 높아지고 있다. 본 연구에서는 대표적인 무연솔더인 Sn-3.0Ag-0.5Cu 솔더를 이용하여 ENIG (Electroless Nickel Iimmersion Gold), OSP (Organic Solderability Preservative) 표면 처리와 등온 시효 시험 (High Temperature Storage test)에 따른 보드 레벨 패키지 (board level package)의 낙하충격 신뢰성 (drop reliability) 시험을 수행하였다. 또한 충격 조건을 변화시켜 시편에 가해지는 가속도 (G:acceleration)와 충격 지속 시간 (pulse duration)에 따른 신뢰성을 평가하였다. 기판의 strain측정 결과 중앙 부위가 가장 응력이 컸으며, 충격가속도에 비례하여 응력이 증가하였다. 시효 처리 전에는 OSP처리된 기판이 다소 우수한 신뢰성을 보였지만, 시효 처리후에는 ENIG기판에서 신뢰성이 우수하였고, 반대로 OSP는 감소하는 경향을 보였다. OSP의 경우 과도한 금속간화합물 (intermetallic compound)의 성장으로 인해 접합 계면에서 취성파괴 (brittle fracture)가 일어난 것을 관찰할 수 있었다.

• Journal of Acupuncture Research
• /
• 제28권2호
• /
• pp.173-181
• /
• 2011

Objectives : The purpose of this study is to report clinical effect of oriental meical for a not improved foot drop patient after herniated intervertebral lumbar disc surgery. Methods : The patient was treated using acupuncture, electroacupuncture, phamacopuncture treatment, herbal medication, moxibustion and physical treatment. And we measured of VAS, ROM of ankle and MMT. Results : After treatment, VAS, ROM of ankle and MMT were improved in case. Conclusions : Oriental medical treatment showed significant effect on patient that not improved foot drop after herniated intervertebral lumbar disc surgery.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권1호
• /
• pp.57-63
• /
• 2012

열전달 향상을 위하여 이차유동을 발생시켜 열전달을 증가시키는 방법에는 여러 가지가 있다. 본 연구에서는 수평채널에 딤플과 돌출을 설치하여 각각의 깊이와 높이를 변화시켰을 때의 압력강하 및 열전달 특성을 수치해석을 통하여 연구하였다. 딤플과 돌출은 수평채널의 윗면과 아래면 에 설치되었으며, 깊이 및 높이를 0.125, 0.25, 0.25, 0.3, 0.375로 하였다. 딤플의 경우, 후면부에서 높은 Nusselt 수가 나타났고 깊이가 커질수록 평균 Nusselt 수가 감소하였다. 돌출의 경우, 전면부에서 높은 Nusselt 수가 나타났고 높이가 커질수록 Nusselt 수가 증가하였다. 딤플과 돌출 모두 유속이 증가함에 따라 열전달이 향상되는 경향을 보였지만 성능계수는 감소하였다. 성능계수는 유속이 낮은 영역에서 가장 크게 나타났다.

• 한국대기환경학회지
• /
• 제19권6호
• /
• pp.689-699
• /
• 2003

This study was to examine characteristics of treating toluene vapor, which gets to be problematic due to its harmful carcinogenicity and mass generation from various sources, through a biological treatment facility which is environment-friendly and adopts a high-efficient and low-cost clean technology. In order to identify whether Alnus Firma Fruit (AFF) can be used as a media for a bioreactor, its utility and basic operating factors, a study was conducted on pressure drop, supply of nutrient substances and retention time which are operating factors of a biofilter, and eliminating characteristics were compared between AFF and the conventional biological activatedcarbon (BAC) widely used as filter media. In the case of AFF, the initial microbial deposits was 2.3${\times}$10$^{7}$ CFU/g dry AFF, which represents the initial microbial density higher than the case of BAC showing 5.5${\times}$10$^{6}$ CFU/g dry BAC And it took about 2 weeks to acclimate until its eliminating rate got to be increased over 90%. As a result of comparing pressure loss taking place with the lapse of time between BAC and AFF, after 130 days passed at SV 25h$^{-1}$ , BAC showed that its eliminating efficiency had a tendency to drop greatly due to a great pressure loss (0.53\longrightarrow54.7 mm$H_2O$/m) caused by an excess of biomass as accumulated. On the other hand. AFF showed that the pressure drop was 0.53 mm$H_2O$/m, about 2 times as much as the initial pressure loss of 0.4 mm$H_2O$/m, which represents no great change in the pressure loss, and its eliminating efficiency was also shown to be continuously high. Therefore, when AFF was used as a filler for a biological treatment facility, a biological filter enabling improvement of the purifying efficiency to be promoted could be provided, and moreover, the pressure loss was so small that the filler replacement cycle or the back flushing cycle could be extended. So, even in terms of the operating cost, it was identified to be an economical filler When an inorganic material was used as a filler, the biofilters performance acted sensitively on whether nutrient substances were supplied or not. In the case of AFF with low adsorptivity, addition of ethyl-alcohol increased the solubility of toluene, and consequently, biodegradation got to be actively made by microbes, and thus, its eliminating rate could be increased. As the flow velocity and the inflow concentration got to be more increased, its eliminating rate got to be lower, and particularly, an increase in the flow velocity made its eliminating rate drop more greatly than an increase in the concentration.

• 척추신경추나의학회지
• /
• 제3권1호
• /
• pp.19-28
• /
• 2008

Objectives : The object of this study is to report a clinical effect of oriental medical treatments with chuna for foot drop caused by herniated intervertbral lumbar disc. Methods : The patient was diagnosed as lumbar bulging disc, and was treated by lumbar traction technique with other conservative treatments including acupunture herbal mixture. And we measured Visual Analog Score(VAS), Modified Bathel Index(MBI), Nurick's Classification, Range of movement of ankle joint. Results : After treatments, Visual Analog Score, Modified Bathel Index, Nurick's Classification, Range of movement of ankle joint were improved in case. Conclusion : Oriental medical treatments with Chuna manual therapy were associated with improvement of foot drop by herniated intervertbral lumbar disc.

• 방사성폐기물학회지
• /
• 제7권1호
• /
• pp.9-16
• /
• 2009

방사성물질 운반용기는 가상 사고조건에서 구조적 건전성이 유지됨을 실험 및 수치해석을 통해 입증하여야 한다. 가상 사고조건에 포함되는 파열낙하 조건에 대한 기존 유한요소해석의 경우 충격완충체에서 재료의 파손이 발생하기 때문에 일반적으로 유한요소모델에서 이 부분을 무시하고 해석한다. 본 논문에서는 파열낙하 해석에서 충격완충체의 변형으로 인한 낙하에너지 흡수의 효과를 고려하기 위해 요소의 적분점에서 응력 이나 변형율이 재료의 파손 기준치에 도달하면 그 요소를 제거하는 방법을 제안한다. 본 해석방법의 효용성을 보이기 위해 한국원자력연구원에서 설계중인 핫셀 운반용기에 대해 파열낙하 해석을 수행하였으며, 요소제거 기법의 적용을 통해 낙하 에너지의 80% 정도가 충격완충체에서 흡수되는 것으로 계산되었다. 본 해석방법은 시험조건에 비해 보수성을 가지는 평가방법이며, 기존의 해석방법과 비교해 파열낙하 조건을 보다 근사적으로 해석할 수 있는 방법이다.

• 한국환경과학회지
• /
• 제25권3호
• /
• pp.345-359
• /
• 2016

This study analyze the synoptic meteorological cause of rainfall, rainfall intensity, drop size distribution(DSD), fall velocity and oblateness measured by the 2D-Video distrometer(2DVD) by comparing two cases which are heavy rainfall event case and a case that is not classified as heavy rainfall but having more than $30mm\;h^{-1}$ rainrate in July, 2014 at Gimhae region. As a results; Over the high pressure edge area where strong upward motion exists, the convective rain type occurred and near the changma front, convective and frontal rainfall combined rain type occurred. Therefore, rainrate varies based on the synoptic meteorological condition. The most rain drop distribution appeared in the raindrops with diameters between 0.4 mm and 0.6 mm and large particles appeared for the convective rain type since strong upward motion provide favorable conditions for the drops to grow by colliding and merging so the drop size distribution varies based on the location or rainfall types. The rainfall phases is mainly rain and as the diameter of the raindrop increase the fall velocity increase and oblateness decrease. The equation proposed based on the 2DVD tends to underestimated both fall velocity and oblateness compared with observation. Since these varies based on the rainfall characteristics of the observation location, standard equation for fall velocity and oblateness fit for Gimhae area can be developed by continuous observation and data collection hereafter.