• Korean Journal of Construction Engineering and Management
• /
• v.20 no.4
• /
• pp.114-125
• /
• 2019

Off-Site Construction (OSC) is a new construction method based on factory production. OSC (Off-Site Construction) is a new construction method based on factory production. Researches such as OSC-related design and production standardization, transport methods are actively conducted in the U.S., UK and other parts of the world as this new method has an edge over existing methods in terms of productivity, economy and quality. As the emergence of this new area requires reasonable management, an analysis of the scope of construction project management is required accordingly. Therefore, this research analyzed the study trends and relationships at the CM/PM range's "Operation level" to identify areas of study, relationship between studies and deficiencies in current research. This study carried out a comprehensive literature review of the OSC (CM/PM) research by analyzing 94 papers in Operation level as of September 3, 2018, and the analysis results are as follows. (1) Working stage level researches have been increasing rapidly since 2006. (2) Non-volumetric type is contributing most significantly at work stage level. In the building sector, it has been identified that problems such as residential: living, quality issues, non-residential: economic difficulties, factory: productivity problems have been addressed. (4) The Non-volumetric pre-assembly type dealt with the economic feasibility of residential and non-residential buildings, whereas the modular type was studied in regards to assembly quality. (5) From 2006, project management areas (e.g., quality, human resources, risks) have been expanded. It is expected that this research will help find new areas of research for OSC. If the analysis is carried out to the level of the industrial, corporate and project phases in the future, it is deemed that the overall research flow and area of the OSC industry can be identified.

• Journal of Life Science
• /
• v.29 no.7
• /
• pp.800-808
• /
• 2019

Charcot-Marie-Tooth disease (CMT) is a group of rare peripheral neuropathies characterized by progressive muscle weakness and atrophy and areflexia in the upper and lower extremities. The most common subtype of CMT is CMT1A, which is caused by a tandem duplication of the PMP22 gene in the 17p12 region. Patients with CMT1A show a loose genotype-phenotype correlation, which suggests the existence of secondary genetic or association factors. Recently, polymorphisms of rs71428439 (n.83A>G) and rs2292832 (n.86T>C) in the MIR149 have been reported to be associated with late onset and mild phenotypic CMT1A severity. The aim of this study was to examine the intrafamilial heterogeneities of clinical phenotypes according to the genotypes of these two SNPs in MIR149. For this study, we selected 6 large CMT1A families who showed a wide range of phenotypic variation. This study suggested that both SNPs were related to the onset age and severity in the dominant model. In particular, the AG+GG (n.83A>G) and TC+CC genotypes (n.86T>C) were associated to late onset and mild symptoms. Motor nerve conduction velocity (MNCV) was not related to the MIR149 genotypes. These results were consistent with the previous studies. Therefore, we suggest that the rs71428439 and rs2292832 variants in MIR149 may serve as genetic modifiers of CMT1A intrafamilial phenotypic heterogeneity, as they have a role in the unrelated patients. This is the first study to show an association using large families with variable clinical CMT1A phenotypes. The results will be helpful in the molecular diagnosis and treatment of patients with CMT1A.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.2
• /
• pp.20-31
• /
• 2014

This thesis aims to how Seo Ye-won(徐禮元) who was the main character of Yukjeollyeo(六節閭) which means tangible cultural properties can receive Jeongnyeo(旌閭) and when he received it clearly. Also this thesis concentrates on why the name of 'Yukjeollyeo' was used even if there are five Jeongnyeos in the Yukjeollyeo. Lastly, this thesis also focuses on the people related to YookJeol. Seo Ye-won passed away with his family in 1593 when he acted as a head of local administration. In that time, the Jinjuseong(晉州城) battle was originated from Korea-Japan war(1592). After his death, Hoengseong(橫城) family(門中) and Confucian scholar made petition for administration in 1811. As a result Seo Ye-won and his wife Lady Lee of the Jeonju-Lee clan(全州李氏) were celebrated as the Jeongnyeo and Jeongyeogak was built in 1817. And his son(Seo Gye-seong:徐繼聖), Seo Gye-seong's wife Lady Noh of the Pungcheon-Noh clan(豊川盧氏), Seo Ye-won's daughter who were not married also could receive Jeongnyeo as Hoengseong family and confucian scholar made additional petition for administration in 1832. For these reasons, Jeongnyeogak(旌閭閣) was called 'Ojeongnyeo(五旌閭)'. After that, Miryang(密陽) family wanted to move it because Seon Ye-won is not the eldest son in the Hoengseoung family. But it could not be enforced and they made a new Yeokak(閭閣) and called 'Yukjeollyeo'. From that time to 1945, the name of Jeongnyeo in the Hoengseong had been still used 'OjeongYeo' and the signboard of Yukjeollyeo was hanged in Jeongnyeo in Hoengseong after 1945. Although there are five people who can get prize of Jeongnyeo, the reason why the name of 'YookJeol' is to memorize the loyalty of Seo Gye-cheol(徐繼哲) who was Seo Ye-won's second son. Hoengseong family made a representation to the government in order to made Seo Gye-cheol receive Jeongnyeo but he could not be celebrated. For these reasons, the loalty of Seo Gye-cheol with five people who received Jeongnyeo has been celebrated as 'YukJeol'. Through this study we could find the record of Yukjeollyeo and historic point clearly.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.1
• /
• pp.4-21
• /
• 2019

In this paper, 23 Silla gold earrings from the sixth and seventhand centuries, excavated from the Yeongnam region, were analyzed. Based on the silver content of the gold plate, they were classified into three types. The classifications included type I(20-50wt%), type II(10-20wt%) and type III (less than 10wt%). In the analysis process, the composition and morphological differences were identified on the surface of the gold plate. In the case of type I and II earrings, it was observed that the fine holes were concentrated in a relatively higher part of the gold content. The causes of the difference in the surface composition of the gold plate were divided into four categories: 1) surface treatment, 2) thermal diffusivity in the manufacturing process, 3) differences in composition of alluvial gold, and 4) the refining method of gold. It is possible that depletion gilding was attempted to increase the gold content while intentionally removing the other metals from the surface of the gold alloy in the portion where the gold deposit is relatively concentrated on the surface of the gold plating. The highest copper content was detected in the earring with the highest gold content of the analyzed earrings, and it was assumed that thermal diffusion had occurred between the gold plate and the metal rod during the manufacturing process rather than intentional addition. Copper was detected only in the thin ring earring type, and copper was not detected in the thick ring earring type or pendant type. It also proves that this earring has a high degree of tightness at higher temperatures, as there was an invisible edge finish on other earrings and horizontal wrinkles on the gold plate surface. In terms of the material of the gold plate, we examined whether the silver content of the gold plate was natural gold or added by alloy through analyzing the alluvial gold collected in the region. As a result of the analysis, it was found that on average about 13wt% of silver is included. This suggests that type II is natural gold, type III is refined gold, and type I seems to have been alloyed with natural gold. Here, we investigated the refining method introduced in the ancient literature, both at home and abroad, about the possibility of alloying silver after the refining process of type III earrings and then making pure gold. It was found that from ancient refining methods, silver which had been present in the natural gold was removed by reacting and combining with silver chloride or silver sulfide, and long-term efforts and techniques were required to obtain pure gold through this method. Therefore, it was concluded that the possibility of adding a small amount of silver in order to increase strength after making pure gold through a refining process is low.

• Korean Journal of Heritage: History & Science
• /
• v.49 no.3
• /
• pp.154-201
• /
• 2016

During the Incipient and Early Silla phases, which witnessed the establishment and development of the ancient Silla state, the Wolseong North Burial Ground functioned as not only the central burial ground in the Gyeongju region of the capital of Silla but also as the central burial ground of the whole Silla state. Wolseong North Burial Ground is where transformations in Silla funerary architecture first occurred. As such, an empirical study of the tombs constructed at this burial ground can be regarded as a starting point from which an understanding of the development of the tomb culture of the Silla state may be achieved. This paper therefore aims to examine the changing nature of the tomb culture of the Early Silla phase through the burial data of Wolseong North Burial Ground and the Gyeongju region. Wooden chamber tombs were constructed from the late phase of Saroguk. At Wolseong North Burial Ground, which eventually developed into the central burial ground of the Gyeongju region, wooden chamber tombs embellished with stone packing emerged during the Incipient Silla phase; wooden chamber tombs with stone mounds, on the other hand, first appeared in the Early Silla phase and eventually became established as the central tomb type. A key difference between the wooden chamber tomb embellished with stone packing and the wooden chamber tomb with stone mound is that, in the case of the latter, stones were packed not only around sides of the wooden structure that acted as the burial chamber but also on top of this structure. The addition of a high earthen mound surrounded by protective ring of stones is another distinctive feature of the latter, presenting a contrast to the low mound of the former. During the Early Silla phase, two types of wooden chamber tombs with stone mounds were constructed at Wolseong North Burial Ground: those with burial chambers located above ground and those with subterranean burial chambers. Also constructed during this phase were the wooden chamber tomb embellished with packed stones, the wooden chamber tomb embellished with packed clay, simple earth cut burials, which had been used since the Incipient Silla phase, as well as the stone-lined burials with vertical entrance which first appeared in the Early Silla phase. However, of these different types of burials, it was only the wooden chamber tomb with stone mound that was covered with a 'high mound.' Differentiation between the different tomb types can also be observed in terms of location, type of burial chamber used, construction method, and tomb size. It is therefore possible to surmise that stratification between the different tomb types, which first emerged in the Incipient Silla phase, became intensified during the Early Silla phase.

• Korean Journal of Heritage: History & Science
• /
• v.48 no.2
• /
• pp.120-141
• /
• 2015

This paper is a preliminary study of architectural characteristics of Jangdae (general's podium), which shows one of the technical changes in fortification of Joseon Dynasty. As a facility for commands of generals and training for officers and men, it was located inside a fortress. Although it is not certain when the first Jangdae was built, the number of them dramatically increased around 18th century. Since the top priority function of the Jangdae was the prospect, it was installed at the hilly spot with open architecture. In addition, the open structure of Eupseong fortress towers on the riverside banks could simultaneously offer the functions as viewing around and Jangdae. Since Jangdae was also a place for military drills and reviews of soldiers, a wide podium was positioned at the front to muster the soldiers. This feature was standardized in the space organization of Jangdae in Joseon, and a mere podium was installed unless the topographic restrictions allows enough space. On the other hand, as a place for a commander, the hierarchy of the Jangdae was revealed through a variety of architectural characteristics. The hierarchy was assigned to the commander's space through the altitude difference, and diverse ornaments were added to show a sense of class. The floor plan of the Jangdae building can be largely categorized into rectangle and square, and the typical sizes of the former are $5{\times}4$ Kans (traditional measuring unit between two columns) and $3{\times}2$ Kans. Out of these two types, buildings of $5{\times}4$ Kans were found in flat land and eupseong fortresses with large space, and the relatively smaller ones of $3{\times}2$ Kans in mountain fortresses. All buildings of square floor plan had $3{\times}3$ Kans style, and the center Kan was twice wider than the side Kan to make the central space wide. It seems that the purpose was to secure the interior space of the upper story because the center Kan accounts for the floor area of the upper story. Some Jangdae's had internal story to form overhead space. The multi-roofed tower style with eaves attached to the upper and lower story is found exclusively in Jangdae. The buildings shows the Onkanmulim style which extends Naejinju (inner column) of the lower story to be the Byeonju (outer column) of the upper story, and the log-framed floor in the upper floor was structured by inserting the Changbang (connecting beam) between the Naejinju's and joining the log frames. In addition, the towers in eupseong fortresses had log-framed floor in the upper floor by setting up the high Nuhaju (column underneath a roof) and joining Cheongbang to the upper part of the column while it cannot be regarded as multi-roofed because only the upper part has a roof.

• Korean Journal of Heritage: History & Science
• /
• v.50 no.1
• /
• pp.42-57
• /
• 2017

The Joseon Dynasty (1392~1910) had a long tradition of making official seals to commemorate the granting of official royal titles, including posthumous honorary titles, to its kings, queens, crown princes and queen dowagers. These royal seals were typically gold-plated or made of jade. After the death of its holder, each seal would be stored in the royal seal depository in the Royal Ancestral Shrine. Extensive efforts were made to restore the traditions and culture of the royal family of Joseon during the reign of King Sukjong (r. 1674~1720). In 1705, discussions were held about the royal ceremonial objects, including the royal seals, stored in the Royal Ancestral Shrine, resulting in the reproduction of a set of accessories related with the storage of royal seals and ten golden royal seals which had been lost during wars or had yet to be made. With these reproductions, each shrine chamber of the Royal Ancestral Shrine would have had at least one seal. The details of the reproduction project were meticulously recorded in The Royal Protocol by the Directorate for the Restoration of Golden Royal Seals("金寶改造都監儀軌"). Given that the restoration project was the single event that led to the reproduction of all the golden royal seals, it is reasonable to conclude that the directorate had fulfilled a historically significant function. In this study, the main discussion is focused on the establishment of the directorate and the storage and management of the damaged royal seals. The discussion includes the manufacturing process of the golden seals, for which The Royal Protocol is compared with other similar documents in order to gain more detailed knowledge of the measurements of the turtle knob, the lost-wax casting technique, the gold plating with mercury amalgamation technique, and other ornamentation techniques. The discussion also covers the activities of the artisans who made the royal seals, based on a study of the royal protocols; the styles of the artifacts, based on an examination of the remaining examples; and the techniques used by the Directorate for the Restoration of Golden Royal Seals to produce the royal seals in 1705.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.2
• /
• pp.62-79
• /
• 2019

This study examined the background of Gyeongju Seochulji Pond (world heritage, historic site No. 138), a historic pond in Sam-guk-yu-sa (三國遺事), and its landscaping period when it served as the garden of the Pungcheon Lim clan (豊川 任氏) in the middle of the Joseon dynasty. For this study, a literature review of poetry, prose, and a personal anthology, and a field survey were conducted. Changes in the landscape were analyzed by comparing the landscape appearing in the literature of the Joseon period with past photographs. The results were as follows: First, even though the function and landscape at that time cannot be guessed as the objective ground from Silla to the early part of the Joseon dynasty is insufficient, it has been managed as a Byeolseo (別墅) garden as Pungcheon Lim's family resided in the area of Eastern-Namsan Mountain during the Joseon dynasty. At that time, Seochulji Pond was recognized as a historic place. It functioned as the garden of Pungcheon Lim's family as Lim Jeok (任勣, 1612~1672) built the Yiyodang pavilion (二樂堂). Second, in the literature, the Yiyodang pavilion has been called Gaekdang (客堂), Jeongsa (精舍), Byeolgak (別閣) and Byeolseo, etc. It can be seen as Nu and Jeong (樓亭), utilized for various uses. Because of this, the name Bingheoru Pavilion (憑虛樓) has mostly been in common use. Third, Seochulji Pond was positioned where the scenery is beautiful, with Gyeongju Mt. Namsan (Mt. Geumo) in the background and with a wide field and the Namcheon River flowing in the front. This was typical of Byeolseo gardens of the Joseon dynasty, combining human environments with natural environments. Fourth, the relationship with the Byeolseo garden disappeared as the head of Pungcheon Lim's family added a temple, lotus flowers, pine trees, and a bamboo forest as described in the old poetry and prose. Currently, the landscape does not appear to be significantly different from that as development has not occurred in the area of Seochulji Pond. Also, crape myrtle (Lagerstroemia indica), which now symbolizes the Seochulji Pond, was not identified in the old poetry or past photographs and is not old enough to confirm whether it was prominent at the time. Through this study, it is necessary to reconsider the spatial meanings of the gardens of the Joseon dynasty period and not to highlight the area of Seochulji Pond as a place in the legend. This is a cultural asset in the area of Eastern-Namsan Mountain and has an important meaning in terms of garden history.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.1
• /
• pp.44-63
• /
• 2019

This study empirically investigated the construction and aspects of change in Chugyeongwon, which is located in Donggweol (東闕). In detail, this study investigated the location of the construction and range of Chugyeongwon, the background and intention of the construction, and the affiliated system and aspects of spatial changes of it. The research results can be summarized as follows: First, Chugyeongwon has been assumed to be the space near Haminjeong (涵仁亭) or between Simindang (時敏堂) and Jinsudang (進修堂) in Changgyeonggung Palace. However, according to related historical materials, it is said that Chugyeongwon was located west of Dochongbu (都摠府) in Hyeopsangmun (協祥門) and near Sungmundang (崇文堂). Through Donggweoldohyeong (東闕圖形), evidence of the construction of Chugyeongwon can be found, which verifies such claims. According to The Plan of Changgyeonggung Palace (昌慶宮配置圖), in the form of modern measured drawing, Chugyeongwon today is the green space created in the south of Munjeongjeon (文政殿) and Sungmundang in Changgyeonggung Palace. Second, According to Donggweoldo (東闕圖), Chugyeongwon was a green space where trees grew on the ground within the walls. No artificial facilities were constructed inside. In addition, Chugyeongwon was located at a site with an altitude higher than the surroundings. Especially, the composition forms and location characteristics of Chugyeongwon are similar to those of the Palace Outer Garden located in Hanyang. Thus, based on this evidence about the form and other aspects of the operation of the Palace Outer Garden, it can be inferred that Chugyeongwon was constructed for the preservation and cultivation of the geographical features inside Donggweol. Third, in the late Joseon period, Chugyeongwon was assigned to Changdeokgung Palace or Changgyeonggung Palace in the same manner as was Donggung (東宮). Thus, it is very likely that Chugyeongwon served as a garden for the Royal Family in the Donggung area. The west boundary of Chugyeongwon, which originally consisted of walls and a side gate, was changed into the form in which the walls and colonnades were combined. Chugyeongwon has been modified due to various acts of development since the Japanese colonial era, and in the end, it has disappeared so that no trace can be found.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.1
• /
• pp.4-31
• /
• 2018

The Neolithic pottery excavated from the Jungsandong site has been classified into four types of pottery (I: feldspar type, II: mica type, III: talc type and IV: asbestos type) according to their mineral composition. These four types of potteries generally appear to have undergone incomplete firing, while the level of oxidation in the type I pottery objects, which have a relatively higher clay content, was found to be particularly low. The type III objects, which have a high talc content, are judged to have been somewhat slow in removing carbon because they contain saponite belonging to the smectite group. Of the four types of pottery, type IV showed the highest redness and the most uniform characteristics, thus indicating a good level of oxidation. In particular, fixed carbide (C; 33.7 wt.%) with a thickness of about 1mm, and originating from organic substances, was detected inside the walls of the type I pottery, while the deep radial cracks in the outer surfaces of the pottery are thought to have been caused by repeated thermal shocks. Given that all of the pottery except for the type I artifacts are considered to be have been made for storage purposes, those containing talc and tremolite are easy to done liquid storing vessels based on an analysis of their material characteristics. As for the type II relics, which are composed of various minerals and exhibit poor physical properties, they seem to have been used for simple storage purposes. As domestic talc and asbestos mines were concentrated in the areas of Gyeonggi, Gangwon, Chungbuk, and Chungnam, it seems likely that talc and tremolite were produced as contiguous minerals. Considering the distance between the remains in Jungsandong and these mines and their geographical distribution, there is a possibility - albeit somewhat slight - that these mines were developed for the mining of various minerals. Although ultramafic rock masses - such as serpentine capable of generating talc and tremolite - have not been found in the Jungsandong area, limestone and biotite granite containing mica schist have been identified in the northwestern part of Yeongjong Island, indicating that small rock masses might have formed there in the past. Therefore, it is judged necessary to accumulate data on pottery containing talc and tremolite, other than the remains in Jungsandong, and to investigate the rocks and soils in the surrounding area with greater precision. The firing temperatures of the pottery found at the Jungsandong site were interpreted by analyzing the stability ranges of the mineral composition of each type. As a result, they have been estimated to range from 550 to $800^{\circ}C$ for the type I artifacts, and from 550 to $700^{\circ}C$ for the type I, II and IV artifacts. However, these temperatures are not the only factors to have affected their physical properties and firing temperature, and the types, particle sizes, and firing time of the clay should all be taken into consideration.