• 건축사
• /
• 통권639호
• /
• pp.26-27
• /
• 2022

• 감성과학
• /
• 제17권1호
• /
• pp.105-114
• /
• 2014

인물사진에서 피부 톤은 사진작가가 가장 중요하게 다루는 부분 중 하나이다. 인물사진의 피부 톤 변화에 따른 수용자의 감성과 선호도의 관계를 파악하기 위해 두 가지 실험이 시행됐다. 실험 1은 피부 톤을 어느 정도 변화시켜야 피실험자들이 그 차이를 감지하는지(JND)를 확인하고, 극단적 단계까지 단계별로 변화시킨 많은 수의 사진들로 실험하여 대략적 선호 분포를 파악하기 위한 것으로, 밝기가 가장 밝은 사진과 붉은(Red나 Magenta) 피부 톤 선호를 확인했다. 실험 1의 결과에 따라, 사진의 밝기를 가장 밝은 밝기로 고정하여 실험 사진들의 수를 줄이고, 높은 선호도를 보였던 마젠타는 보색인 그린(Green)과 함께 5단계로 조절하고, 나머지 색채의 샘플은 한 장으로 제한함으로써 실험 2를 심화했다. 그 결과, 중성색 피부 톤의 공통된 선호와 함께 각 성별집단 간 선호도의 상이점이 발견되었고, '행복'하거나 '편안'한 감성이 선호도와 긍정적으로 관련이 크다는 결론을 얻었다. 본 연구를 통해 같은 인물사진의 피부 톤의 조정이 그 사진에 대한 사용자의 선호에 유의미한 결과가 될 수 있음을 확인하였다.

• 정보과학회지
• /
• 제33권9호
• /
• pp.9-14
• /
• 2015

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.688-694
• /
• 2002

As a tool for strain measurement to work with screw driven or hydraulic material test systems, in which mechanical vibration is inherent, SSDG(Speckle Strain/Displacement Gage), ESP(Electronic Speckle Photography) and its 3-dimension version SDSP are investigated for the theory and practical appliance. Through tension test of steel strips, their validity and shortcomings are examined. As the results, it has been shown that, although SSDG and ESP provide direct measurement of in-plane strain in one direction, they are so sensitive to the out-plane displacement. On the other hand, SDSP which is aided with DIC (Digital Image Correlation) technique to trace the movement of the speckles provides not only in-plane 2-dimensional displacement field, but also out-of-plane displacement simultaneously. However, because the DIC is time-consuming, not automated yet and it needs post-processing to evaluate strain from the displacement field, SDSP appears to be not adequate as a real time sensor.

• 한국인쇄학회지
• /
• 제12권1호
• /
• pp.1.2-15
• /
• 1994

This is the study which appear the relation between the situation of Anchor point and the qualities of lithographic prints using the uncoated paper. Anchor point were measured by microscopic photography and Kubelka-munk`s method. The situation of Anchor point increased with print density and print though, but it decreased with evenness and rub off. In case of commercial uncoated paper, the situation of Anchor point was optimized when it was 25~35% apporoximately. In preparation of samples for microscopic photography, the samples were used by the resin testing methods. This method used that the resin fixes the printed papers of sample very hard, in preparation of samples for microscopica potography a good result could be gained by this method.

• 한국자동차공학회논문집
• /
• 제4권2호
• /
• pp.147-157
• /
• 1996

Natural gas is gaining more attraction as a future fuel in particular both for environmental protection and energy conservation. In order to bring about more widespread use of gaseous engines, the technology capable of achieving output and efficiency performance equivalent to that of diesel engines needs to be developed. In the present paper, the requirements of the pilot torch from pre-chamber for ensuring ignition and promoting combustion are discussed by means of taking high-speed flame photography and system can run with leaner mixture of various fuels comparing to the electric plug ignition system cause the ignition delay period ignited with the torch and the combustion period are very short in spite of changing A/F of gaseous fuels in the main chamber. However, the suitable piston-cavity design for the use of lower-hydrocarbon fuels such as propane and butane must be discussed increasingly in the mear future.

• 한국자동차공학회논문집
• /
• 제15권5호
• /
• pp.24-29
• /
• 2007

This study aims to provide a fundamental data for directly injected hydrogen fuel engines. Spray, ignition and combustion characteristics of hydrogen were studied using constant volume chamber. For spray visualization, hydrogen was vertically injected into a combustion chamber at various condition, for example, injection pressure, ambient pressure. And an argon laser was used for the shadowgraph photography by applying optical method. Also, to investigate heat-release rate and flame propagations, spark was ignited on hydrogen injected at the different time after injection and the duration of injection was also changed. Processes of ignition and combustion were analyzed by heat-release rate calculated by pressure history and were observed by shadowgraph photography The results gave much knowledge of spray, ignition and combustion characteristics of hydrogen.

• 한국정밀공학회지
• /
• 제21권10호
• /
• pp.154-161
• /
• 2004

An experimental method for measuring side-necking deformation near a crack-tip is described. It is based on Stereoscopic Digital Speckle Photography and Digital Image Correlation, and it is simple and robust to mechanical vibration inherent to a hydraulic material test system. The validity and accuracy are evaluated through a calibration fur rigid body translation. A case study has been performed for a CT specimen made of a ductile steel and the three dimensional profiles of the side-necked region are presented as the load increases. Also, the details of the procedure and the surface treatment are discussed.

• 한국정밀공학회지
• /
• 제8권4호
• /
• pp.41-54
• /
• 1991

Laser speckle photography-one of the Laser speckle measurement methods which, recently, are used widely in various science, and engineering applications are succesfully used in the non-contact measurement of In-plaane displacement. In this study, automated measurement and analysis are tried in the laser speckle photo- graphy method using a video camera, computer control and processing, and a X-Y positioning table driven by computer controlled stepping motor. The experiment was compared with the theorecial strain and stress data from finite element method. The result showed that displacement, strain and stress can be measured more accurately and conveniently by using this approach.

• 대한기계학회논문집A
• /
• 제30권6호
• /
• pp.637-642
• /
• 2006

A plastic zone size is regarded as a measure of material resistance, and also it determines the fracture behavior. The importance of estimating or measuring the plastic zone size cannot be too emphasized. In this article, SDSP(Stereo Digital Speckle Photography) is examined as a new techniques to measure the plastic zone developed in a ductile metal. This technique is simple, vibration free and non-contact, and measures simultaneously in-plane displacements as well as out-of plane displacements like the side necking. Experimental results for a CT specimen are presented to demonstrate the accuracy in comparison with those obtained by recrystallization technique and finite element analysis.