• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.1
• /
• pp.44-52
• /
• 1987

For the favorable performance of a D.I. diesel engine, it is important to improve the mixture formation process and the ensuing early stage of combustion process. In the present paper, high speed photography was employed to investigate the effectiveness of a cavity digged in a piston crown for some more useful utilization of air. The cavity would function to improve mixing of fuel and air by the increase of turbulence of air and by the impingement of fuel spray on the cavity wall. The results obtained are summarized as follows: (1) From an aspect of thermal efficiency, it is effective to inject the spray tangentially to the cavity wall to enlarge the area of spray evaporation. (2) some deductions obtained from previous investigations using a hot air stream duct are supported by the present results. For example, it is effective for the quick development of flames throughout the combustion chamber to mix the evaporated fuel of main spray with the intermediates brought about by the early stage of combustion of the preceded auxiliary fuel spray.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.2
• /
• pp.106-113
• /
• 2002

Stencil is used normally as a mask for seeder pasting on pad of PCB. The objective of this study is to develop stencil cutting system and determine optimal conditions which make good-quality stencil by using a Nd:YAG laser. The effects of process parameters such as laser power, type of mask, gas pressure, cutting speed and pulse width old the cut edge quality were investigated. In order to analyse fille cut surface characteristics(roughness, kerf width, dross) optical microscopy, SEM photography and roughness test were used. As a result, the optimal conditions of process parameters were determined, and the practical feasibility of the proposed system is also examined by using a commercial Gerber file for PCB stencil manufacturing.

• Journal of the Korean Society for Precision Engineering
• /
• v.4 no.4
• /
• pp.84-92
• /
• 1987

To investigate the influence of the cutting pressure on the laser cutting quality, an expermental facility was constructed which can measure the cutting pressure distribution for various cutting conditions. Flow visualization was performed using the Schlieren photography and the pressure acting on the workpiece surface was measured, corresponding to the important process variables such as the kind of assist gas, nozzle pressure, distance between the nozzle exit and the workpiece surface, and the presence of the secondary nozzle. The cutting pressure acting on the workpiece was largely influenced by the nozzle pressure and nozzle-workpiece distance. The secondary nozzle which is used to raise the effective working pressure had its obvious role only when the angle between it and the main nozzle was small and when the distance between the nozzle exit and the workpiece surface was large.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.29-39
• /
• 2010

By understanding the construction process of sea dikes and the current state of the thickness and speed of fluid in the bottom layer protection work of final closure gaps, a construction method applicable for the blocking of bottom layer work will be selected. The three construction methods selected will be tested in site through various methods, and the reinforcement of bottom layer protection and impervious effect will be verified. The verification results are as follows: 1) The overall riprap layer were 0.5~1.0m thicker than planned so that the grouting depth and grout input amount increased 2) The applied construction methods permeability of riprap layers were improved from $\alpha{\times}10^{-2}cm/s$ before the construction to $\alpha{\times}10^{-4}cm/s$ after construction. 3) The results of core extraction in order to grossly verify the hardening time and durability allowed the identification of grout injection effect. The amount of filling of the injection was difficult to judge because the slime in many areas made the reading of borehole photography difficult.

• Korean Institute of Interior Design Journal
• /
• v.16 no.2 s.61
• /
• pp.347-356
• /
• 2007

The concept of time-space to be seen in the modem society has complex features at the points of scientific, philosophical, artistic, religious point of view. It has been brought up at a points of neo centric religious, philosophical view and then after, phenomenal approach and scientific approach were rendered through Newton and Einstein and so many scholar approaches affected the artistic field significantly. With such visual expression, it has affected the paintings for a long time till the 19th century, and then has affected various fields such as photography, film, video, computer, architecture and has currently affected the various space expressive of our daily lives and virtual space of digital. This study is to extract a visual and expressionistic characteristic through historical examination and multi-scholar analysis of time-space concept. Especially, by expanding the previous time and space concept, experimental cases and expressionistic characteristics has come up on the media art that offers various experience and by analyzing the expressionistic characteristics of the time-space concept expressed in media art, it is to extract the basic factors for the diversity of space experience.

• Journal of the Korean Institute of Rural Architecture
• /
• v.13 no.4
• /
• pp.83-90
• /
• 2011

The purpose of this study is to grasp the color situation of buildings on Urban Street, through the color image evaluation to research primary factors have an effect on color image preferences. A scope of this study is district of Sang Mu in Gwangju Metropolitan City. A method of study put out evaluation model after BIB test by photography, spot color. And performed Factorial Design, Multiple Regression Analysis through SD questionnaire. The result of this study show that color situation exceedingly used YR predominates, support, stress color, in the second place used predominate, support color is B, stress color is R. Luminosity showed middle luminosity 4.1~7.0, low freshness distribution. Color image was evaluated modern and cold image and appeared affirmative aspect clean, order, neat image and showed negative aspect stiff, flat image. And 'comfortableness', 'unification' had an effect on color image preferences The result of this study showed that color plan need to improve comfortableness, unification bring control into line color at building color image of urban street.

• Korean Journal of Human Ecology
• /
• v.22 no.6
• /
• pp.571-586
• /
• 2013

The purpose of this study was to examine educational meanings of snack and lunch time of 4-year-old children and their teachers in a kindergarten class. The study was done in the Class of 4-year-old children in S Kindergarten located in Songpa-gu, Seoul. And 30 children of this class, Teacher A who is the teacher in charge of the Class, and Teacher B who is the researcher and teacher in charge of it participated in it. The study was carried out by the ethnography method and data collection was done through participation observation, interviews, video and voice recording, and data collection of photography shooting. The results are as follow: First, the children had private conversations, shared their cultures, deepened and expanded their existing concepts, expressed their emotions and relieved their tension, and strengthened relations with friends during the snack and lunch time. Second, the teachers promoted conversation and communication, gave the opportunity that the children can set the lunch table by themselves and tried to make the snack and lunch time with the children by discussing what they are how they are operated with them together. In conclusion, the snack and lunch time can be more meaningful time for children when there are proper educational plans and support of teachers which are considered children's viewpoints.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.15 no.1
• /
• pp.31-40
• /
• 1997

The objectives of color reproduction in printing, photography, and digital hard-copy is an important problem. The Color is obsorved differently from illumination an obsorvation condition, and varied according to individual taste. Generally, the color reproduction system is designed with colorimetric color reproduction method. But the color gamut of the color reproduction system is different each other and the one device has nonlinear relationalship between the other. By these reason, to predict the reproduced color based on linear color transform method is difficult. Some methods of non-linear color transform by neural network was proposed. These method was theoretical useful and valid to transform from CIE color to device color. But more studies were needed to realize the non-linear color transform system. In this paper, we described a method to realize the non-linear color transform system by neural network. The optimum structure of the non-linear color transform system was found out. The structure of descrived system has four layer( input, output and two hidden layers.) Input and output layer have 3 units, and a hidden layer has 27 units. We trained 216 color-samples, and estimated the realized color transform system by 1115 color-samples. The average color difference between original color samples and transformed color samples was 2.54.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.4
• /
• pp.45-51
• /
• 2015

An experimental study was performed for the analysis of frequency-equivalence ratio correlation in the methane-air premixed flame influenced by ultrasonic standing wave. The propagating flame was caught by high-speed Schlieren photography, and the variation of flame-behavior including the flame structure was investigated in detail employing a post-processing analysis of the high-speed images. It was found that a structural variation and propagation-velocity augmentation of the methane-air premixed flame by the intervention of ultrasonic standing wave were more caused off around the stoichiometry. Also, a dependency of the flame behaviors on the driving frequency and equivalence ratio of the reactants was confirmed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.258-262
• /
• 2011

The laminar burning velocity in premixed Oxy-CH4 flames was studied in a lab-scale Bunsen burner. $CH^*$ chemiluminescence method and Schliren photography were used. Experimental results were compared with numerical prediction which was calculated with a CHEMKIN 3.7 package with a PREMIX code. Global equivalence ratio of oxy-CH4 mixture was varied from 0.5 to 2.0 in a laminar flow region. The laminar burning velocity was measured as 3.1 m/s for Schlieren photograph and 2.9 m/s for $CH^*$ chemiluminescence technique (angle method).