• Journal of Magnetics
• /
• v.16 no.2
• /
• pp.129-133
• /
• 2011

This paper shows the entire future market volume of the HTS power industry, one of main smart grid equipment, in the case of the final market penetration ratio reaching 100% in the domestic market (South Korea). In this paper, the market penetration ratio is determined using the judgment method, with the market penetration S-curve induced using the Delphi method and the Product Life Cycle from 2011 (supposed launching year, not realistic physical year), to 2050 (expected final target year). This paper analyzes the HTS market penetration ratio of each stage, apparent innovation, early adapters, and the early/late majority and laggard stage, using the S-curve, thus calculating the total future market volume of HTS equipment in the positive sense. Finally, this paper estimates the quantitative analysis results for the HTS4-items (cable, FCL, transformer, rotation machine) of each year within the domestic market.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.843-845
• /
• 2000

Many linear motion devices in industry require a limited movement in which the moving member oscillates. Such motion is often governed by a prescribed distance-time relationship.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2531-2534
• /
• 2000

본 연구는 전동기의 부분방전에 의해 발생되는 전자파를 측정하여 전동기의 열화상태를 진단할 수 있는 전동기 절연열화진단시스템을 설계하는 방법을 제안하고자 한다. 따라서 부분방전에 의한 전자파를 측정하는 시스템을 구성하고, 측정된 데이터를 분석하여 정량화된 특징 데이터를 추출하고 생성된 데이터를 이용한 뉴로-퍼지 진단모델설계 방법을 제시한다. 그리고 제안된 방법에 의해 설계된 진단모델을 실측데이터를 통해 진단하여 그 타당성을 입증하고자 한다. 1단계 연구로, 본 연구에서는 현장 전동기의 전자파를 On-Line으로 계측하는 시스템을 구성하여 전동기의 절연체내에서 발생하는 부분방전에 의한 전자파를 계측하여 데이터로부터 전동기의 절연열화상태를 해석하여 절연 열화와의 관계를 분석하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.08a
• /
• pp.165-170
• /
• 2003

Centrifugal blowers are widely used for air handling units in industry applications. The blower has a centrifugal impeller and a scroll casing including a driving component such as an electric motor. The impeller takes forward or backward blades to induce flows into the blower. Comprehensive investigation according to the two kinds of blades is systematically carried out for a guidance of design. It is observed that flow rate of the blower with forward blades is larger than that of the system with backward blades. The reason is due to larger velocity from the rotating forward blades and the tendency is validated by a parallel experiment with a wind tunnel. Numerical analysis for the system shows detail information inside the blades and the casing. A series of figures to show the flow details offers deep understanding of a centrifugal blower with different blades.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.741-746
• /
• 2001

This paper presents an investigation of a vehicle-to-vehicle distance control using a Hardware-in-the-Loop Simulation(HiLS) system. Since vehicle tests are costly and time consuming, how to establish a efficient and low cost development tool is an important issue. The HiLS system consists of a stepper motor, an electronic vacuum booster, a controller unit and two computers which are used to form real time simulation and to save vehicle parameters and signals of actuator through a CAN(Controller Area Network). Adoption of a CAN for communication is a trend in the automotive industry. Since this environment is the same as that of a real vehicle, a distance control logic verified in laboratory can be easily transfered to a test vehicle.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2753-2755
• /
• 2003

Overhead crane must do to control occurrence of Anti-Sway according to work situation that is used in case move industry spot's heavy freight, and do safe transfer of freight. Transfer process that make use of crane suspends and consist of series action that put down freight to do relevant addition decreasing the speed before objective while move by schedule section equal speed because increasing the speed after lift thing. This need skill degree by experience because there are operator's function and affinity. Also, must control this effectively because can affect big productivity elevation according to effect that get in transfer of safe freight, Therefore, illuminate physical characteristic of crane and algorithm of motor drive department and there is purpose of this research to do so that correct control may be available through over head crane's shaking control and position control designing LQ controller.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.15-16
• /
• 2015

According to 2014 fire statistical yearbook in the National Fire Data System, a main cause of fire is electrical fire except carelessness fire. Joint/contact badness is the one of the main cause of electrical fire. Furthermore, power relays which are used in electric panel board, motor control center and automation controller, are main element of automation system in the industry field. Overload, voltage unbalance and open-phase due to joint/contact badness of terminal make electric accidents or electrical fires. In order to prevent joint/contact badness of terminal, this paper proposes a sensing circuit of chattering, tracking, arc current, voltage unbalance and open-phase etc. Some experimental tests of the proposed apparatus confirm practicality and validity of the theoretical results.

• Journal of Welding and Joining
• /
• v.23 no.5
• /
• pp.30-36
• /
• 2005

In this part, thermal finite element analysis(FEA) is conducted for the experiments in part 1. The molten area of base metals are analyzed by FEA results and compared with experimental ones. Temperature data from FEA results are used to calculate the IMC layer thickness analytically at the interface. IMC layer is established as a function of time and temperature when there is an interaction between solid steel and molten aluminum. The IMC layer thickness is obtained by cumulative computations using the time-temperature data from FEA results.

• Asia Marketing Journal
• /
• v.21 no.1
• /
• pp.23-44
• /
• 2019

A decade has passed since the first generation of Genesis was launched in the U.S. with the plaque of Hyundai-Genesis. Genesis Motors was separated from Hyundai Motor in 2015, and has struggled to have the Genesis stand alone in the competitive U.S. luxury sedan market. The present case study aims to find challenges facing the Genesis, which Hyundai has positioned as a luxury sedan competing against conventional luxury brands such as BMW, Mercedes-Benz, and Lexus; evaluate Genesis Motors' strategic response to meet these challenges; and explore an alternative positioning strategy. Specifically, the present case study addresses barriers against the Genesis' market performance, by focusing on the obstacles rooted in the consumer perception as well as the obstacles that stem from the change in the U.S. automobile industry and the nascent network of the Genesis dealership. Genesis Motors' current strategies are evaluated, and an alternative strategy is explored that is largely based on the American consumers' perceptions of the Genesis vis-a-vis conventional luxury brands and outperforming midsize brands.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.3
• /
• pp.184-190
• /
• 2015

NVH engineering has become a hot issue due to radical technology changes and development in automotive industry since customers' expectations and needs for their vehicle is taken to a higher level. However, the source identification and quantification of the road noise within a vehicle is still not at the level where it needs to be to meet their expectations due to its' complex transfer path and difficulties in path optimization. The primary focus of this research is on direct force obtaining method at suspension hard points using suspension test rig. Directly obtained forces at suspension to body mounting points are critical and crucial for determining the effects of design changes of the suspension has on road noise performance. Direct force obtaining method has its limitation in sensor installation within an actual vehicle therefore, many has been indirectly calculating forces using full matrix inversion method or dynamic stiffness method. In this study, to circumvent this limitation, a suspension rig is used. Then, the suspension rig is verified through a comparative analysis of its dynamic behavior between the actual vehicle by cleat test on chassis dynamometer.