• 한국산업융합학회 논문집
• /
• 제27권2_2호
• /
• pp.325-332
• /
• 2024

Contemporary power systems demand efficient and sustainable technologies. Single-phase induction motors, while widely used, face efficiency challenges due to inherent rotor losses. Proposed solutions include the Line-start Permanent Magnet Synchronous Motor (LSPMSM), leveraging permanent magnets for enhanced energy density but facing demagnetization and cost issues. Alternatively, the Line-start Synchronous Reluctance Motor (LSRM) operates as a hybrid motor without permanent magnets, reducing rotor losses and potentially improving efficiency. This paper focuses on designing an LSRM rotor for air conditioner compressors, analyzing start-up characteristics and efficiency through finite element analysis. A comparative study with single-phase induction motors provides insights for future motor technology selection, balancing efficiency and other requirements.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.459-463
• /
• 2001

Since recent inverters are formed IGBT VVVF inverter its switching speed has been increased relative to the conventional inverters and the motor design based on the switching surge voltage at the inverter output is very important factor. Therefore, motor and inverter should be designed to have the optimal characteristics by considering the mutually limited conditions. On this research the design technology characteristics for inverter driving traction moor is compared to the products in Korea and the analysis is performed. Thus, it is intend to re-estimate the technology level and introduce the products by HHI, which is driving on Seoul subway line 6 since December, 2000.

• 한국산업융합학회 논문집
• /
• 제19권4호
• /
• pp.223-230
• /
• 2016

This paper presents data-driven thermal protection algorithm for preventing overheating of automotive sunroof motor. When a sunroof motor operates abnormally, its coil is overheated and it is failed. Besides, drivers and passengers are damaged. Hence, the sunroof motor observes its temperature and will be stoped when its temperature reach a predefined level. In order to implement low-cost thermal protection function, we drew a knowledge-based temperature increasing and decreasing curve from the result of experimental test. And then, we implemented data-driven thermal protection algorithm which prevents motor's On/Off operation according to motor operating voltage and motor speed. Finally, we implemented experimental test bed and evaluated its feasibility.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.922-924
• /
• 2000

We worried about the technology difference between our company and the advanced companies at present motor market. Thus we started independently to develop the technology of motor coil insulation system and to accumulate insulation technology data. When we export the electric machines to oversee market. we are asked to set up the insulation system to show our product excellence. We first evaluate the insulation system of our motors to realize higher reliability of high voltage insulation system. Therefore we are possible to do the insulation diagnosis in real site and have accumulated the data related in insulation diagnosis. Thus we have improved the our insulation system. And also these data were used to new product development as very useful data. also will be used the insulation deterioration diagnosis to estimate the remained life time which is very important data for the maintenance management. As the result. we are able to get the our product reliability.

• 경영과학
• /
• 제20권1호
• /
• pp.77-88
• /
• 2003

Supply-Chain Management (SCM) was the integration of the activities that procure materials, transform them into intermediate goods and final products, and deliver them to customers. These activities include the traditional purchasing function, plus other activities that were important to the relationship with suppliers and distributors. P company was the first vendor in motor industry of Korea and had a flexible relationship with motor industry through SCM. However, p company had independent information with motor Industry and it caused many troubles In the operation of the P company. Considering these facts, authors had developed the inventory control system which was the part of order-fulfillment process and could make a progress in the operation of the inventory. The core factor of the developed inventory control system was the combination of the theoretical factors and the empirical factors. That is, the factors which were excluded in existing inventory theory revealed to be important.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.79-83
• /
• 1997

The inverter fed BLDC(Brushless DC) motor has been increasingly applied to industry and home appliances due to the advance of power electronics and permanent magnet technology, and its high efficiency and good acoustic noise characteristics. The BLDC motor and drives, however, require the rotor position sensors that may cause some problems such as the high cost and space. In this paper, sensorless algorithm for an interior permanent magnet BLDC motor is proposed. The maximum torque per ampere operation with advance angle considering load torque and speed was simulated and verified through the experiment.

• Journal of Electrical Engineering and Technology
• /
• 제9권6호
• /
• pp.1928-1934
• /
• 2014

Induction motors are widely used due to their rugged, robust and easy to care features. Since they are heavily used in industry, testing of three phase induction motors have play a vital role. In order to determine motor equivalent circuit parameters, efficiency of motor, squirrel caged laboratory sized an induction motor test setup is prepared. It is suitable for the induction motor with the frame size of 100 and 112. A virtual Instrumentation typed engineering workbench (called as LabVIEW) software packet, is utilized as a graphical user interface program. Motor input power is measured by measuring the input voltage, current and power factor with the help of hall effect typed voltage and current transformers. Also, the output power is measured by measuring the speed and torque with the help of an encoder and torque sensor. All outputs of the voltage and current transformer, encoder and temperature, torque sensors are given to the Data Acquisition Card (DAQ) which acquires the data for processing and then the equivalent circuit parameters, efficiency, performance and loading characteristics are found out, using LabVIEW based user interface. It is suggested to use this test rig for the quality control of produced motors in industry, and an educational experiment setup in the school laboratories.

• 디지털융복합연구
• /
• 제14권12호
• /
• pp.73-84
• /
• 2016

본 연구의 목적은 세계 자동차 산업의 글로벌가치사슬을 살펴보고 한국 자동차산업이 세계적인 경쟁력을 확보하고 있는지 분석하고자 한다. 또한 한국의 대표적인 완성차업체인 현대자동차의 가치사슬을 살펴보고 사례를 통해 성공요인을 찾아보고자 한다. 현대자동차 공급사슬의 구축 과정을 살펴보고 공급사슬 구축이 현대자동차 성장에 어떠한 영향을 주었는지 분석하고 부품기업들의 수직적 분업구조에 대해 살펴보고자 한다. 한국 자동차산업은 기계 기술 중심에서 전자 통신기술을 중심으로 융 복합화가 추진되면서 이업종 간 교류가 확대되고 있다. 현대자동차는 국내 최초로 수직적 계열화를 도입하여 사업부문에서 원가절감 및 고가 자동차 생산으로 경쟁력을 확보하였고, 부품의 자체조달로 가격경쟁력의 우위를 확보했으며 공격적 경영 및 판매를 통해 국제경쟁력을 높여가고 있다. 현대자동차는 미국, 인도, 터키, 체코, 러시아, 브라질에 공장을 설립 운영하고 있다. 구조조정과 인수합병 등을 통해 현대모비스를 비롯하여 51개 계열회사를 운영하고 있으며 이를 중심으로 독자적인 수직적 분업구조를 구축하고 있다. 현대차는 해외 모듈기업에 대한 의존도를 극복하고 모비스를 중심으로 공급가치사슬을 유지하고 있다.

• 한국산업융합학회 논문집
• /
• 제14권2호
• /
• pp.53-57
• /
• 2011

Military and commercial unmanned vehicle navigation systems are being actively studied in the field of robotics. In this study, GPS-based path generation algorithm Film Festival and the system can compensate for the shortcomings of applying a map-based path plan, the unmanned vehicle navigation systems to improve the performance of path planning algorithms are introduced.

• 한국산업융합학회 논문집
• /
• 제20권1호
• /
• pp.81-87
• /
• 2017

In order to reduce the weight of the blow motor case and to maintain the strength of the motor joint, the mechanical joining strength is to be predicted. The true stress - true strain curves for finite element analysis were obtained through tensile tests of HGI and DP 780 steel. The mechanical joining strength was predicted through an explicit finite element analysis and the accuracy of the predicted results was verified by actual sample test. The regression equation for predicting the mechanical joining strength to the thickness of the DP 780 steel was derived. The minimum thickness of DP 780(1.2mm), which is equivalent to the joining strength of HGI(2.6mm), was derived from the equation.