• Journal of the Korean Society of Industry Convergence
• /
• 제25권1호
• /
• pp.55-60
• /
• 2022

This study conducted the measurements of air flow rate for blower systems with experiment and numerical. A new airflow rate test method is suggested, with which it is possible to accurate measurements and calculate the air flow rate for blower systems. The blower(axial fan) is an industrial fluid machine device that supplies a large amount of air by driving an impeller with an electric motor, and it is widely used throughout the industry such as steel, power plant, chemical, semiconductor, LC D, food, and cement. The airflow from the blower is for exchanging the heat in the cooling unit or heat exchanger. The temperature of coolants and hydraulic oil primarily depends on the amount of airflow rate through the cooling package so its accurate estimation is very important. Moreover, it required a larger investment in time and cost since it could not be executed until the system is actually made. Therefore, this research is intended to examine the phenomenon of air flow pattern when testing air flow rate, suggested new test method, and show the result of the validation test.

• Journal of the Korean Society of Industry Convergence
• /
• 제26권5호
• /
• pp.743-750
• /
• 2023

Aluminum alloy is a material widely used in the aircraft industry. However, since it has relatively low hardness, strength and tribological properties, it is necessary to improve these properties. In this paper, a TiN thin film was coated on the surface of AL7075-T7351 using DC magnetron sputtering. The coating was performed by setting different deposition pressure, deposition time, and applied power. Then, the tribological properties of the thin film were investigated. As a result of the experiment, the hardness of the thin film was higher than that of the base material, and the specimen with the highest hardness had excellent friction coefficient, wear amount, and adhesive strength characteristics. Through this study, it was confirmed that the tribological characteristics of aluminum alloy can be improved by depositing thin films using DC magnetron sputtering.

• Journal of the Korean Society for Precision Engineering
• /
• 제22권4호
• /
• pp.113-120
• /
• 2005

This paper presents the development of the design of the robot element. Robot element design is an important part of robot design since it decides the performance and life time of the robot. It is necessary that the robot kinematics and the robot dynamics are accomplished to design the robot elements. The robot kinematics and dynamics determine the design parameters of the element. We developed a robot element design program with which a designer can design the robot element with convenience and reliability. The program is composed of motor, harmonic driver and ball-screw design. The program is founded on the virtual robot design program. The virtual robot design program is the powerful software which may be used to solve various problems of the robot kinematics and dynamics. The robot element design program may be used to calculate the design parameters of the element that are necessary to design robot element. Therefore, the designer can decide upon the available robot elements available to perform the objective of the robot. The robot element design program is expected to increase the competitiveness and efficiency of the robot industry.

• Resources Recycling
• /
• 제10권3호
• /
• pp.3-13
• /
• 2001

The Korean Auto industry has developed remarkably over the past 30 years. In 2000 alone, Korea produced 3.11 million vehicles, and the number of vehicles registered surpassed the ten million mark. As the number of vehicles registered in Korea has increased, yew after you, a rising number of cars have been scrapped. In 2000, a total of 455,592 automobiles were scrapped, up dramatically from only 101,158 in 1989. The system for handling of ELV(End-of-Life Vehicles) in Korea is governed by the "Motor Vehicle Control Act". The Act places the responsibility for vehicle scrapping directly on the vehicle owners. h vehicle owner can only can eel a vehicle registration after he gets a certificate from an authorized vehicle dismantler showing that his vehicle was properly scrapped according to the law. The take-back rate of ELV reaches nearly 100% in Korea. The vehicle scrapping process in Korea is very similar to those in other countries. fluids such as fuels and oils are first removed, and recyclable parts are collected and separated. Engines and transmissions are dismantled and recycled for use as raw material. Plastics, which are not easily reused, are generally treated as industrial wastes. The "Motor Vehicle Control Act" prohibits reuse of certain parts in order to guarantee the safety of the used auto parts. However, some restrictions on the reuse of auto parts have recently been eased to promote recycling. In this paper, additionally, car recycling policy of the foreign countries such as Japan, Germany and EU were reviewed.

• Transactions of the Korean Society of Automotive Engineers
• /
• 제20권6호
• /
• pp.100-106
• /
• 2012

Recently, the demand to acquire and improve durability performance has steadily risen in rubber components design. In design process of a rubber component, an analytical prediction is the most effective way to improve fatigue life. Existing methods of analytical estimation have mainly used an equation for fatigue life obtained from fatigue test data. However, such formula is rarely used due to costs and time required for fatigue testing, as well as randomness of rubber materials. In this paper, we describe fatigue life estimation of rubber component using only the results from a relatively simple tearing test. We estimated fatigue life of the Janggu type fatigue specimen and the automotive motor mount, and evaluated reliability of the proposed method by comparing the estimated values with actual test results.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• 제20권7호
• /
• pp.53-57
• /
• 2006

PID controller is widely uesd as automatic equipment for industry. However when a system has various characters of intermittence or continuance, a new parameter decision for accurate control is a hard task. As method of solving this problem, in this paper, a Neural Network gain automatic regulator as PID controller functions is presented. A property feedback control gain of system is decided by a rule of Delta learning. The function of proposed automatic Neural Network gain regulator is verified by speed control experiment results of Induction Motor.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• 제11권2호
• /
• pp.89-93
• /
• 1997

As industry gets rapidly automatic, D.C servo motor which is controlled by a PI controller needs accurate control. However, when a system has various characters, it is very difficult to guarantee its accuracy. In this paper, rule-based auto-tuning PI controller for motor speed control system is presented as a way of solving this problem. Some rules are based on Ziegler-Nichols step response and expert knowledge. Control parameters are determined by error, slope, steepest slope point, and permiSSIon overshoot. The accuracy of control is demonstrated by a computer s mulation .

• Journal of The Korean Society of Clinical Toxicology
• /
• 제2권1호
• /
• pp.31-36
• /
• 2004

Three workers, field operators in lubricating oil processing of petroleum refinery industry were found unconscious by other worker. One of them who were exposed to an high concentration of H2S was presented with Glasgow Coma Score of 5, severe hypoxemia on arterial blood gas analysis, normal chest radiography, and normal blood pressure. On hospital day 7, his mental state became clear, and neurologic examination showed quadriparesis, profound spasticity, increased tendon reflexes, abnormal Babinski response, and bradykinesia. He was also found to have decreased memory, attention deficits and blunted affect which suggest general cognitive dysfunction, which improved soon. MRI scan showed abnormal signals in both basal ganglia and motor cortex, compatible with clinical findings of motor dysfunction. Neuropsychologic testing showed deficits of cognitive functions. SPECT showed markedly decreased cortical perfusion in frontotemporoparietal area with deep white matter. Another case was recovered completely, but the other expired the next day.

• Journal of the Economic Geographical Society of Korea
• /
• 제7권1호
• /
• pp.65-81
• /
• 2004

Foreign direct investment (FDI) by firms has various motives in terms of the strategy for firms' long-term growth. This research uses the case study of Hyundai Motor Manufacturing Alabama to analyze the motives of the Korean auto industry's FDI in the U.S. and the locational factors that determined the selection of the site. This paper starts from the question of why Hyundai made the decision to invest in the U.S., which is not favorable in terms of production cost, especially considering that its exports to the U.S. have been on the increase. The results indicate that the strongest motive for the decision to invest in the U.S. was to ameliorate the trade friction between Korea and the U.S. Given that Hyundai depends on the U.S. market to a large extent for its exports, the foremost motive was to use local production in order to reduce the serious trade imbalance in the automobile sector between Korea and the U.S. in order that trade friction with the U.S. may be avoided and causes for trade disputes may be reduced. Other motives such as improving the access to local consumers were of secondary importance. After the selection of the country in which to invest, however, various factors were considered in the decision regarding the location of the plant, and incentives by local governments ultimately played a key role in this decision. The results imply that the Korean manufacturing industry's investment in the U.S. cannot be explained by traditional FDI theories and instead was greatly driven by a strategic defensive motive. In addition, the results confirm that the design of an appropriate incentive structure by host governments is important for attracting FDI.

• The Journal of Korean Institute for Practical Engineering Education
• /
• 제1권1호
• /
• pp.91-98
• /
• 2009

In approach of human-robot interaction, it is importance task in future robot industry to make to robot recognize, express, coping the emotions. The purpose of this study was to examination the effects unconscious positive and negative emotion of information processing of motor program. 13 participants(male=11, female=2) viewed smile-face picture and angry-face picture priming at 10ms level, and then performanced button press, button press and one tennis ball hitting, and button press and two tennis ball hitting task. The results appeared that positive emotion triggered more fast RT than negative emotion in planning complex motor program. Possible explanations for the performance differences depended on emotion are discussed and future research directions were provided.