• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.10
• /
• pp.1259-1263
• /
• 1999

In this paper, a method to guarantee system continuity is developed, which can be applied to discontinuity problem in the time domain of restructurable control system. This method can be summarized as input alternation using weight change considering convergence speed of system mode. Input is changed from 'system continuity guarantee input,' which is defined as a input that minimizes the change of state variables, to 'alternative controller input,' which is selected by Neil's PI/EAM[3]. AIDC aircraft model is used for simulation. By showing the waveform of system input and state variable, we can sure that this method is effective for depression of system shock like jerk.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1487-1492
• /
• 2000

To identify forklift's booming noise in cabin under idling engine revolution, we discussed and applied conditioned input analysis. Acceleration signals at engine mounts and front window and rear window were considered as candidate input signals and output signal was sound pressure signal at driver's ear position in cabin. To reduce the numbers of the input signals, one idea were applied; Each one input signal from each input groups was selected, respectively because input signals in the same group were highly correlated. And Hilbert transform was used to determine the ordering of three selected inputs. Partial coherence functions, multiple coherence function and conditioned spectral density functions were investigate to the effects of booming noise by partial inputs.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.5
• /
• pp.245-250
• /
• 2001

A new capacitor-input type voltage source rectifier is proposed in this paper. The proposed rectifier is based upon 6-pulse diode rectifier with the addition of an auxiliary circuit. By proper operation of the switches of the auxiliary circuit, the input voltage waveform has 18-pulse characteristics and the input current becomes almost sinusoidal due to input ac reactors. The operating principle along with current analysis and input voltage waveform synthesis is described. The experimental results from a laboratory prototype verify the proposed concept.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.04a
• /
• pp.316-323
• /
• 1997

This paper compares input shaping techniques for controlling residual vibration of flexible structures. Input shaping generates vibration-reducing shaped commands through convolution of an impulse sequence with the desired command. Both feedforward and feedback control approaches with/without input shaper for uncertain dynamical systems are investigated to evaluate the control performances. The control objective is to achieve a fast settling time and robustness to plant uncertainty, to eliminate residual vibrations. It is shown by a series of simulation that a properly designed feedback controller with input shaper performs well, as compared with open-loop controller with input shaper.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.14 no.4
• /
• pp.31-37
• /
• 2006

In this paper, an experimental study on the robust input shaping for control of the residual vibration of flexible structures has been investigated. Two approaches has been used for the robustness of input shaping: the first method is to increase the number of impulses, and the other includes an EI shaper using vector diagram. The input case designed by the application of the above methods has been applied to a control problem involving residual vibration of a rotating hub with two flexible appendages. It has been found by a series of experiments that the input shaper designed in this paper works well for the residual vibration control of the flexible structure.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1997.11a
• /
• pp.111-114
• /
• 1997

Generally, fuzzy models have the capability of dividing input space into several subspaces. compared to liner ones. But hitherto suggested fuzzy modeling algorithms not take into consideration the correlations between components of sample input data and address them independently of each other, which results in ineffective partition of input space. Therefore, to solve this problem. this letter proposes a new fuzzy modeling algorithm which partitions the input space more efficiently than conventional methods by taking into consideration correlations between components of sample data. As a way to use correlation and divide the input space. the method of principal component is used. Finally, the results of computer simulation are given to demonstrate the validity of this algorithm.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2018.01a
• /
• pp.177-178
• /
• 2018

키보드 정보가 노출되는 취약점이 발견되면서 키보드를 통하여 아이디 및 비밀번호를 입력하는 인증의 보안성 결여 문제가 대두되었다. 이를 대응하기 위하여 마우스를 통하여 비밀번호를 입력하는 이미지 기반 인증이 등장하였으며, 이 인증방식은 인터넷 뱅킹 및 결제 서비스와 같이 중요도가 높은 서비스에 도입되어 사용자가 입력하는 비밀번호를 안전하게 보호한다. 하지만 키보드와 동일하게 사용자가 입력하는 마우스 데이터가 노출되는 취약점이 발견되고 있으며, 본 논문에서는 WM_INPUT 메시지를 활용하여 노출되는 마우스 데이터를 보호하는 방안을 제시한다. 제시하는 방안은 WM_INPUT 메시지를 활용하는 공격을 효과적으로 방지하며, 이를 통하여 이미지 기반 인증방식의 안전성을 강화할 수 있을 것으로 사료된다.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.05a
• /
• pp.205-207
• /
• 2013

In a situation that building energy consumption is increasing worldwide, the research utilizing BIM technology to analyze building energy has been actively conducted. On the other hand, data input method of the building energy analysis has been still manually entered. This paper proposed a improved input method of required information for building energy analysis using the ECO2-OD program. As a result, although some required information of BIM based design software could be almost entered when it comes to general information and architectural sector, it has a problem to be handled in HVAC sector. Therefore, in the both of general and architectural sectors, the BIM information from the BIM-based design software could be directly used to automatically and systematically input the information. Future research should be studied the algorism and method in connection with data exchange to utilize input method of ECO2-OD from BIM data.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.4
• /
• pp.410-418
• /
• 1999

This paper describes the use of residual and parameter identification methods for fault detection in an air handling unit. Faults can be detected by comparing expected condition with the measured faulty data using residuals. Faults can also be detected by examining unmeasurable parameter changes in a model of a controlled system using a system identification technique. In this study, AutoRegressive Moving Average with seXtrnal input(ARMAX) and AutoRegressive with eXternal input(ARX) models with both single-input/single-input and multi-input/single-input structures are examined. Model parameters are determined using the Kalman filter recursive identification method. Regression equations are calculated from normal experimental data and are used to compute expected operating variables. These approaches are tested using experimental data from a laboratory's variable-air-volume air-handling-unit.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.19 no.3
• /
• pp.220-226
• /
• 2014

Input current ripple and harmonic components of the power device are main causes of electromagnetic interference (EMI). Although the discontinuous conduction mode (DCM) operation can reduce harmonic components of the power device by reducing reverse recovery current of diode and turn-off voltage spikes of the switch, input current ripple increases due to high peak to peak inductor current. Therefore, in this paper, frequency control algorithm is proposed to reduce the input current ripple of DCM operated interleaved boost converter. In the proposed algorithm, duty ratio is fixed either 0.33 or 0.67 to minimize the input current ripple and the switching frequency is controlled according to operating conditions. 600 W 3-phase interleaved boost converter prototype system is built to verify proposed algorithm.