• Journal of the Korean Society of Clothing and Textiles
• /
• v.42 no.1
• /
• pp.74-87
• /
• 2018

This thesis investigated majo and maja costumes of depicted in Francisco de Goya's paintings from the middle of 18th to the early 19th century, and presented the costumes defined as the upward flow from the lower classes to the upper classes. The study methodology selected those describing the maja and majo among the figure paintings, portraits and genre paintings by Goya that identify unique characteristics with the qualitative analysis of the cases of the upward flow with that affect the costume of the upper classes. The influence of the majo and maja costumes were outstanding in the shape of the outfits while the French style gown of the upper class women were one-piece dresses in shape, those of the maja were two-piece dresses that consisted of the upper and gather skirts. The costume was perfected by use of the mantilla or head kerchief, instead of the headdresses prevalent at those times. The majo's costume affected the men's costume of the upper classes in the shape of the outfits. Short coat and tight breeches were preferred to the loose ones as well as instead of a long coat. Rather than the wigs or tri-corn hat, the head kerchief and sash belt applied, which could be evidence of the upward flow as well as shows proof of the influence of majo and maja costumes.

• Journal of Biosystems Engineering
• /
• v.13 no.4
• /
• pp.9-19
• /
• 1988

The threshing of head-feed combine may be accomplished mainly by the action of impact between threshing teeth and rice. In this study, it was attempted to assess threshing performance characteristics of head-feed threshing teeth. And the characteristics of threshing teeth will be applied to the method which could analyze the time and order of impact between teeth and the rice, which was used as a basis for predicting the threshing performance and determining the optimum design parameters. The results of the study are summarized as follows: 1. About 50% of threshed material were threshed by the beginning 7 impacts on the rice bundle. Threshing torque decreased until 25 impacts and did not change thereafter. 2. There was significant difference in the threshability according to the shape of threshing teeth. The triangular-shaped tooth was the most efficient in threshability ratio and the semicircle-shaped tooth was the lowest. There was no significant difference in specific energy requirement for the varied teeth design. Torn-head ratio being generated by the semicircle-shaped and the triangular-shaped teeth in series was less than that by a single tooth with the triangular-shaped and the double setting of the triangular-shaped. Chaff generation ratio by the triangular-shaped and the semicircle-shaped teeth was less than the others tried. 3. The triangular-shaped teeth in series, which was newly designed for this study, showed an intermediate characteristics between the double setting of the triangular-shaped and the semicircle- shaped teeth. Threshability ratio of the triangular-shaped teeth in series was higher than that of the semicircle and lower than the double setting of the triangular-shaped tooth. Torn-head generation ratio for it was about same as that of the semicircle. Chaff being generated by the triangular-shaped teeth in series was about same as the double setting of the triangular-shaped teeth. 4. About 40% of threshed grains which passed through concave were concentrated under the threshing tooth and the rest of grains displayed a skew distribution toward the inlet of threshing chamber.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.2
• /
• pp.339-347
• /
• 2011

Objective: The purpose of this study was to evaluate of various material of pillows by using biomechanical variables such as the cervical stability, head pressure distribution, and muscle activity. Method: Eight subjects participated in the experiment. Three different materials such as polyester sponge, memory foam and the buckwheat shell used for Korean traditional pillow were tested. Electro-goniometer, six channels of electromyography(EMG), ten channels of the head pressure sensors were used to measure the biomechanical responses. Surface electrodes were attached to the right/left semispinals capitis(RSC, LSC), the right/left sternocleidomastoid(RSM, LSM), the right/left upper trapezius(RUT, LUT). The cervical stability was evaluated by the angle deviated from the standing neck position. The head pressure distribution was evaluated by the pressure per unit area recorded on the sensors and the intensity of peak pressure. Electromyography(EMG) data were analyzed by using root mean square(RMS) and mean power frequency(MPF). Results: The buckwheat shell material showed a higher stability in the cervical spine then the other pillows during spine position. In terms of head pressure distribution, the memory form indicated the lowest pressure at supine position, buckwheat shell material indicated the lowest pressure during lying down to side, and polyester cushion recorded the highest pressure at all postures. Conclusion: The buckwheat shell material has a biomechanical advantage to maintain a healthy neck angle and reduce the pressure on the head, which means the buckwheat shell is a potential material for ergonomic pillow design. The pillow with memory form showed second best biomechanical performance in this study. Application: The shape of the buckwheat shell pillow and the characteristics of materials can be used to design the pillow preventing neck pain and cervical disk problems.

• Journal of IKEEE
• /
• v.12 no.4
• /
• pp.185-195
• /
• 2008

In this paper, PIFA(Planar Inverted F Antenna) which operates in PCS(Personal Communication System) band is designed and characteristics are investigated. Designed PIFA was installed in three types of handsets, folder, bar, slide, and the performance was evaluated. Head and hand phantom were added to make the most similar environment to real condition of mobile phone use, and influences on antenna performance were analyzed. The simulation results confirm radiation patterns are greatly changed and antenna efficiency is decreased by the effect of human body. Performance variation of the mobile handset antenna was observed as changing the angle between mobile handset and head phantom from $0^{\circ}$ to $2^{\circ},\;4^{\circ}$ to confirm the variation caused by the relative position of mobile handset and head phantom. Directivity was decreased gradually as the antenna goes away from head phantom, and showed the trend of increasing efficiency. But in the case of bar type, where the position of antenna is relatively close to head phantom, that trend didn't show. It was confirmed that the shape of handset has a great effect on the performance.

• Journal of Clinical Otolaryngology Head and Neck Surgery
• /
• v.29 no.2
• /
• pp.235-239
• /
• 2018

Due to the structure with one end closed, the external ear resonance effect in which the high frequency is amplified can be generated, and the sound can be perceived well. The external ear resonance normally has a first peak and a second peak. On average, the first peak has a gain of 18.6 dB at 2620 Hz and the second peak has a gain of 18.2 dB at 4210 Hz. The resonance of the external auditory canal changes with the state of the tympanic membrane, the presence of the ventilation tube, and the structure (length, diameter, shape) of the external auditory canal. A patient with a postauricular meatomastoid cutaneous fistula was admitted to the hospital with a foreign body which is the molding of the hearing aid. After removal of the foreign body, the resonance of the external auditory canal was lost and the subjective sound cognitive ability decreased. In the case of postauricular meatomastoid cutaneous fistula, we confirmed the improvement of sound cognitive ability, the change of pure tone hearing threshold, and the change of the external ear resonance after reconstruction of the ear canal without middle ear reconstruction.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.08a
• /
• pp.27-36
• /
• 1999

To have high flatness quality of hot rolled strip in the hot strip finishing mill train, a new inter-stand tension profile measuring device of segmented looper roll type(coined as Flatness Sensing Inter-stand Looper, FlatSIL) and a new flatness control system have been developed in this study. The device measures the strip tension profile across the strip width and informs the strip wave pattern to new flatness control system where work roll bending mode to relieve the strip wave is determined. The existing automatic shape control system which uses laser type shape-meter installed at the outlet of the last finishing mill stand strip tension between down coiler and last finishig mill since the latent wave concealed by the strip tension between down coiler and last finishing mill stand cannot be measured by the laser distance-meter. Thus the existing shape control system is not able to control the flatness through the full strip length. The new flatness control system, however, works for full strip length during strip rolling as far as the tension profile measuring device and work roll bender are on. With the new flatness control system, work roll bender is automatically controller to minimize the latent wave of the running strip and the flatness quality as well as strip travelling stability has been noticeably improved from strip head through body to tail.

• Journal of the Korean Society of Safety
• /
• v.29 no.4
• /
• pp.15-22
• /
• 2014

As the risk of the various external risk was increased, a study on the integrity assessment of the nuclear transport cask was needed. In this paper, an integrity assessment of the nuclear transport cask under the ballistic impact was studied. The projectile with L/D = 5 was used in simulation. The applied head shapes of the projectile were five types such as flat shape, conical shape, hemispherical shape, truncated conical and sliced flat shape, respectively. The range on the velocity of the projectile was 85 m/s to 680 m/s. The cask body of the nuclear transport cask was not penetrated by the projectile speed up to Vprojectile = 510 m/s. As the cask body was penetrated by the all types projectile with Vprojectile = 680 m/s and the cask lead in the nuclear transport cask was collided with the projectile. As the projectile moved to 31.3 mm in the cask lead, the cask lead was not penetrated by the projectile with Vprojectile = 680 m/s. The integrity assessment on the nuclear transport cask under ballistic impact up to Vprojectile = 680 m/s was obtained.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.11
• /
• pp.1487-1499
• /
• 2007

In this study, photographs of 600 Korean females aged from 20 to 50years old were indirectly measured in Venus face 2D program. The measurements were analyzed by statistical methods. The purpose of this study was to differentiate the facial types of adult women for the beauty industry. As a result of factor analysis, 6 factors were selected the key factors of facial shape: head height(factor 1), head width(factor 2), side face width(factor 3), head width and circumference(factor 4), face length(factor 5), and side face width(factor 6). We categorized facial type into 5 groups with the previous 6 factor. 5 types were most common facial shapes: Oblong face(type 1), Square face(type 2), Oval face(type 3), Round face(type 4), Triangle face(type 5). The results of facial type analysis were showed that Round face(26.6%), Triangle face(25.3%), Oval face(22.3%), Square face(20.0%), Oblong face(5.7%).

• Journal of the Korean Society of Costume
• /
• v.67 no.2
• /
• pp.101-115
• /
• 2017

Ancient documents, characters, and relics are the utmost important materials when it comes to researching ancient clothing. Of these, the ancient characters explain the contents of the time, which makes it an objective historical record. China has hieroglyphics, such as oracle bone inscription and bronzeware script, which existed in Sang[Eun] Ju era. This character is formed by a simple line and detailed drawing, showing the object or the concrete form and characteristics, so the reader can understand the meaning. Oracle bone inscription and bronzeware script, which are written in pictograph, include contents that help to grasp the original shape and form of ancient official hats. Chinese characters Geon(巾, 건) Byun(㝸, 변) Myun(免, 면) Mo(冒, 모) Ju(冑, 주) and Kwan(冠, 관), which are the names of the official hats, have been researched, and Mi(美, 미) Ryung(令, 령) Wang(王, 왕) and Hwang(皇, 황), which are the characters related to the official hats, have been studied. Geon(巾, 건) switched its form from shape of material around waist to wraping wearer's head. Byun(㝸, 변) is a hat with decoration, and Myun(免, 면) is in form of a helmet with ornaments. Mo(冒, 모) in bone script looks like a hat with decorations on each sides, but in bronzeware script, it is more like a simple round hat Ju(冑, 주) covers one's head and has decorated ornaments, and The Kwan(冠, 관), which is now a common name of official hats, is not shown in oracle bone inscription or bronzeware script, It might have been used later than the other two types of hats. As for the related Chinese characters, Mi(美, 미) is in the shape of a feather decoration, Ryung(令, 령) is similar in shape to the letter 'A', and Wang(王, 왕) is in shape of simple hat from 령 with decorations. Hwang(皇, 황) is like a Wang(王, 왕) hat, but with fancier decorations. Oracle bone inscription and bronzeware script show the original form and shape of ancient hats.

• Korean Journal of Plant Resources
• /
• v.13 no.3
• /
• pp.213-218
• /
• 2000

Morphological characteristics of 16 collected safflower (Carthamus tinctorius L.)accessions were studied at Gyongbuk A.T.A. Uisong Medicinal Plant Experiment Station in 1998. As for plant height, 5 lines were tall(more than 131cm), which were mainly foreign safflower. Middle and small were 5 and 6 accessions, respectively. Number of branch per plant was 11∼13 in 2 accessions of domestic safflowers while foreign safflowers have more than 50 branches per plant. Leaf shapes were oblong(3 lines), lanceolate(10 lines) and broadly linear(3 lines). There were three types of leaf margin shape which were repand(7 lines), serrate(4 lines) and parted serrate(5 lines). Flower color was white(1 line), yellow(13 lines) and red orange(2 lines). As for flower head shape, 14 lines were conical and 2 lines were flattened. There were thorns on bract of flower head in 11 lines but in 5 lines there were not. Domestic safflower lines had seeds of conical shape. Contrastively, seed shapes of foreign saffower lines were oval.