• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.978-983
• /
• 2014

This research proposes a method to estimate the fatigue life of solid-state drive(SSD) due to the effect of dummy solder ball under forced vibration. Mechanical jig is developed to describe the SSD in laptop computer. The jig with SSD is mounted on a shaker, and excited by a sinusoidal sweep vibration within the narrow frequency band around the first resonant frequency until the SSD fails. A finite element model of SSD is also developed to simulate the forced vibration. It shows that the solder joints at the corners of controller package are most vulnerable components and that placing dummy solder balls at those area is effective method to increase fatigue life of SSD.

• 대한방사선치료학회지
• /
• 제20권2호
• /
• pp.123-130
• /
• 2008

목적: 의료환경의 변화와 교육환경의 변화에 신속하게 대처하기 위하여 대학에서는 필요한 실습 장비를 갖추고 있어야 한다. 그러나 재정적인 부담과 그것들을 유지 관리하는데 생기는 어려움으로 인해 국내의 대학들이 고가의 방사선 치료 장치를 설치하기는 불가능하다. 이로 인한 실습의 제약을 해소하기 위하여 김천대학 방사선과에서는 모형 선형가속기 및 모형 부속기구를 제작하여 학생들의 실습 시간에 활용하고 있으며 그 유용성에 대해 보고하고자 한다. 대상 및 방법: 우리가 자체 제작한 모형 선형가속기(DLINAC-001)는 실제 선형가속기와 동일한 회전지지축(gantry)과 조사 head의 회전이 가능하도록 제작하였다. 또한 실습교육의 극대화를 위해 우리는 자체적으로 모형 맞춤블록, 모형 쐐기필터, 모형 전자선 조사통과 환자고정기구를 제작 하였다. 결 과: 선형가속기의 기계적인 기능과 동일하게 모형 선형가속기를 활용할 수 있으며, 다양한 용도의 모형 부속기구들을 실습 시 활용할 수 있다. 결 론: 김천대학 방사선과에서 제작된 모형 선형가속기와 부속기구를 제작하여 학생들의 실습시간에 활용함으로서 다양한 영역의 임상실습이 가능하다. 또한 현장감 있는 실습을 시행함으로서 학습 효과를 극대화 할 수 있으며, 임상에서 요구하는 실무능력을 함양할 수 있다.

• 한국자동차공학회논문집
• /
• 제18권4호
• /
• pp.18-30
• /
• 2010

As the automobile industry is developing, the number of deaths and injuries has increased. To reduce the damages from automobile accidents, the government of each country proposes experimental conditions for reproducing the accident and establishes the vehicle safety regulations. Automotive manufacturers are trying to make safer vehicles by satisfying the requirements. The Hybrid III crash test dummy is a standard Anthropomorphic Test Device (ATD) used for measuring the occupant's injuries in a frontal impact test. Since a real crash test using a vehicle is fairly expensive, a computer simulation using the Finite Element Method (F.E.M.) is widely used. Therefore, a detailed and robust F.E. dummy model is needed to acquire more accurate occupant injury data and behavior during the crash test. To achieve this goal, a detailed F.E. model of the Hybrid III 5th percentile female dummy is constructed by using the reverse engineering technique in this research. A modeling process is proposed to construct the F.E. model. The proposed modeling process starts from disassembling the physical dummy. Computer Aided Design (CAD) geometry data is constructed by three-dimensional (3-D) scanning of the disassembled physical dummy model. Based on the geometry data, finite elements of each part are generated. After mesh generation, each part is assembled with other parts using the joints and rigid connection elements. The developed F.E. model of dummy is simulated based on the FMVSS 572 validation regulations. The results of simulation are compared with the results of physical tests.

• 한국의류산업학회지
• /
• 제26권1호
• /
• pp.55-64
• /
• 2024

This study investigated the usage and product conditions of clothing companies and online dummy companies for the development of fitting dummy for South Korean women's wear in their 50s and 60s. These women-targeted apparel companies mainly used nude-sized torso type and torso crotch type made of FRP material. The frequency of use of the dummies was high, while the user satisfaction was moderate. Users expressed dissatisfaction with the inaccurate reflection of the body shape according to the KS sizing system and the measurements such as the front and back intercye, upper arms, abdomen, crotch, and waist back length. Upon survey, 73.7% of the respondents answered that development of the dummy and the appropriate age for it is 50 to 54, and they preferred the torso crotch form. In the production of online dummy companies, the torso crotch type and torso type were most widely produced, and polyurethane, FRP, and recycled paper materials were used. The size of dummy was expressed in numerical type, and 6, 7, 8, 9, 10, 12, 14, 16, 18 and 44, 55, 66, 77, 88 were being produced. Even models of the same size had significant deviation, especially in the waist circumference. Also, there was no dummy reflecting 25%~75% center interval to the KS garment sizing standards of women in their 50s and 60s. Therefore, it is desperately necessary to develop a fitting dummy for KS clothing sizing system that reflect their body sizes and shapes.

• Journal of the Korean Data and Information Science Society
• /
• 제24권3호
• /
• pp.593-601
• /
• 2013

회귀모형에서 범주형 변수를 독립변수로 포함시켜야 할 경우가 발생한다. 회귀모형의 범주형 변수는 가변수를 통해 수량화된다. 이 연구에서는 하나의 양적 독립변수와 하나 혹은 두 개의 범주형 독립변수를 가지는 회귀모형에 대해 가설검정 결과와 함께 회귀직선을 보여주는 교육용 도구를 엑셀 VBA (Visual Basic for application)를 통해서 구현한다. 가설검정 결과와 회귀직선은 교호작용이 포함된 모형, 교호작용이 없는 모형 및 가변수가 없는 모형에 대해 단계별로 제공된다. 이 교육도구를 통해 가변수와 교호작용의 의미를 더 쉽게 이해할 수 있으며, 나아가 어떤 모형이 주어진 자료에 가장 적합한지 그림을 통해 판단할 수 있게 된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.406-410
• /
• 1991

This paper presents an improved algorithm of optimal measurement system design with a reliability evaluation method for large power system. The proposed algorithm is developed to consider the dummy bus and to achieve highest accuracy of the state estimator as well with the limited Investment cost. The dummy bus in the power system is impossible to install measurement meter, while real and reactive power measurement values are exactly zero. Thus, the effect on these dummy bus measurements is considered in the proposed algorithm. On the other hand, P/C model is developed by taking advantage of the matrix sparsity. The improved program is successfully tested for KEPCO system with PSS/E lineflow calculated data package.

• International Journal of Automotive Technology
• /
• 제7권3호
• /
• pp.309-314
• /
• 2006

In this paper, the ride comfort from a computer simulation was compared to the experimental result. For measuring ride comfort of a passenger car, acceleration data was obtained from the floor and seat during highway running with different speeds. The measured acceleration components were multiplied by the proper weighting functions, and then summed together to calculate overall ride values. Testing several passenger cars, the ride comforts were compared. In order to investigate the effect of vibration signals on the steering wheel, an apparatus to measure the vibrations and weighting functions on the steering wheel were designed. The effect of the steering accelerations on the ride comfort were investigated and added for the overall ride comfort. For the computer simulations, Korean dummy models were developed based on the Hybrid III dummy models. For the Korean dummy scaling, the national anthropometric survey of Korean people was used. In order to compare and check the validity of the developed Korean dummy models, dynamic responses were compared to those of Hybrid III dummy models. The computer simulation using the MADYMO software was also compared to the experimental results.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 추계학술발표회
• /
• pp.570-573
• /
• 2003

광산개발로 인한 지하수 유동체계 변형에 따른 주변환경 영향조사의 과정으로 충북 음성군 지역에서 야외 조사를 실시하였다. 조사 과정중 연구지역의 지하수계를 이해하고 개발에 따른 지하수 유동체계 변화를 예측하고자 수행된 모델링의 입력인자 산정을 위해 순간충격시험을 실시하였다. 순간충격시험을 통해 수리전도도, 투수량계수 그리고 저류계수를 산출하였다. 그리고 dummy의 주입과 회수시 다르게 나타나는 수리전도도값의 원인에 대해서도 고찰해 보았다.

• 대한기계학회논문집A
• /
• 제21권7호
• /
• pp.1058-1072
• /
• 1997

A head-neck complex dummy, for measuring brain pressure and reaction force in the cervical spine was developed for experimental study related in injury mechanism. Dummy comprised aluminium-casted head with water filled cavity for simulating brain and mechanical neck assembled with six motion segments. Several kinds of experiments (compression, bending, cyclic modulus, relaxation and constant velocity profile) for the developed mechanical neck showed that this neck model is biomechanically reliable compared with in-vitro test results. As an application of developed head-neck complex dummy, shock absorbing properties of protective helmet was chosen. The experiments showed that the maximum pressure increment of brain after impact was tolerable compared with the guide line for mild brain injury pressure (25psi). Constrast to this results, the reaction force in the neck was high enough to produce failure in the cervical spine.

• 한국소음진동공학회논문집
• /
• 제25권3호
• /
• pp.176-183
• /
• 2015

This research proposes a method to estimate the fatigue life of SSD(solid-state drive) due to the effect of dummy solder ball under forced vibration. A finite element model of the SSD was developed to simulate the forced vibration and a modal testing was performed to verify the developed finite element model. Fatigue life of the SSD under vibration was experimentally determined according to JEDEC standard in which the SSD was excited by a sinusoidal sweep vibration within the narrow frequency band around the first natural frequency until the SSD fails. Basquin's equation was introduced to estimate the fatigue life of the SSD due to the effect of dummy solder balls. It shows that the dummy solder balls are effective elements of the SSD to increase the fatigue life of an SSD by increasing 700 times of the fatigue life of the given SSD.