• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.546-550
• /
• 1993

Three basic experiments in agricultural machinery management , strengthening the construction of socialized service system, facilitating the two-level management system in rural areas and carrying through the principle of " paid service ' are described and the main methods of strengthening agricultural machinery management are developed in this paper.aper.

• Agribusiness and Information Management
• /
• 제6권2호
• /
• pp.40-48
• /
• 2014

As basic research to develop HEV and EV agricultural field machinery, the present study analyzes the technical trend of electric agricultural field machinery through product analysis, paper analysis, and patent analysis concerning HEV and EV in the automobile, construction machinery, and agricultural machinery sectors. For product analysis, the homepages of companies in these sectors were consulted to analyze the number of products of each company. For paper analysis, key words related to HEV and EV were selected, a search formula was drawn up, and articles search sites were consulted. And for patent analysis too, key words were selected and then a search formula was drawn up to examine published patent applications or registered patent applications, and trends were analyzed by structure, country, and year. The number of HEV and EV products were 17 in the automobile area, 8 in construction machinery, and 4 in agricultural machinery. Notably, in the agricultural machinery area, all HEV and EV products were from advanced companies overseas. In terms of papers, papers published in the past 5 years were searched and 33,195 papers were from the automobile area, 3,806 were from construction machinery, and 2,687, the fewest papers, were from the agricultural machinery area. A search of patents in the electric drive technology area in Korea, USA, and Japan, and Europe showed 1,927 valid patents, with 1,120 in Japan, 497 in USA, 193 in Korea, and 117 in Europe. Analysis of the trend of research on electric agricultural field machinery by product, paper, and patent shows the development of HEV and EV technology in Korea is insufficient compared to USA, Japan, and Europe, which means rapid technological development is needed.

• 한국안전학회지
• /
• 제30권5호
• /
• pp.20-28
• /
• 2015

Recently, railroad's preference greatly increased as the environment-friendly means of transportation as the importance in the aspects of environment and energy efficiency. So the government established the Korea Rail Network Authority which takes full charge of railroad construction in 20047 for regular railroad construction to combine major key points in the whole country with each other to be one city region by connecting them to each other to be within the commute time range of a hour and thirty minutes. And it has arranged large-scale railroad construction by establishing plans to build the 1st and 2nd national railroad networks as the national project and investing about 100 trillion won in it from 2006 to 2020. As large-scale railroad construction is promoted as the national project like this, there has been a string of safety accidents in it due to the large and complex construction project. As the government strengthened the safety accident prevention plans, safety accidents have tended to decrease in 2011. However, accidents of construction machinery have found to increase. Therefore, this study tried to investigate accident cases of the Korea Rail Network Authority for the recent 5 years and analyze accidents of construction machinery to prevent them in railroad construction sites and suggest accident prevention plans due to it by conducting, investigating, and analyzing the survey of its operators and superintendents of the construction sites and drawing the problems.

• 한국건설관리학회논문집
• /
• 제7권2호
• /
• pp.148-161
• /
• 2006

본 연구는 전략기획의 관점에서 국내외적 환경요인에 대한 SWOT분석과 델파이조사를 통해 한국 건설기계산업의 현 위상과 당면과제를 살펴보고 전략적 쟁점을 도출하고자 한다. 이와 함께 SWOT분석 등을 통해 도출된 전략적 쟁점을 해결하기 위한 건설기계산업의 발전적인 정책대안을 제시함으로써 한국 건설기계산업의 국제경쟁력 제고와 안정적인 성장을 유지하고자 한다.

• 대한기계학회논문집A
• /
• 제40권8호
• /
• pp.743-750
• /
• 2016

트랙롤러는 건설기계의 무한궤도 메카니즘에 장착되어 차량에 가해지는 하중을 지지하는 역할을 하는 핵심부품이다. 건설기계의 작업환경은 매우 가혹하며, 이러한 환경에 노출된 트랙롤러는 반복되는 주행충격으로 누유 및 파손 등의 고장을 발생하게 된다. 트랙롤러의 고장이 발생하면 건설기계 차량의 주행에 큰 영향을 미치게 되므로, 트랙롤러 생산업체에서는 자체시험을 수행하여 제품의 성능을 확인하고 있다. 하지만 현재 트랙롤러 대부분의 시험은 수직하중을 가한 상태의 시험만을 수행하고 있다. 이는 트랙롤러가 장착된 건설기계의 선회주행시 발생되고 있는 수평방향에서 가해지는 하중을 고려하지 않은 시험평가로 실제 주행조건을 재현하지 못하는 문제점이 있다. 따라서 본 논문에서는 트랙롤러에 가해지는 수직 및 수평방향 하중 크기와 이를 고려한 시험조건을 정립하였다. 또한 수평방향 하중이 트랙롤러의 고장에 미치는 영향에 대한 해석과 시험의 결과를 제시하였다.

• 한국가스학회지
• /
• 제27권3호
• /
• pp.91-97
• /
• 2023

오래된 디젤 엔진을 탑재하고 있는 노후화된 건설용 기계 및 차량들은 보통 수명이 길기 때문에 최신의 배기 규제와는 동떨어진 수준의 유해한 배출가스를 계속 배출하고 있다. 따라서 이러한 구형 디젤 엔진을 최신 배기 규제를 만족하는 엔진으로 대체할 수 있다면 대기질 개선에 도움이 될 것으로 기대되는데, 건설 현장에서 손쉽게 구할 수 있는 프로판 연료를 적용한 엔진이 적합한 대안이 될 수 있다. 따라서 본 연구에서는 6.8리터 CNG 엔진을 베이스로 프로판 전용 엔진을 개발하였으며, 가스 전용 인젝터, 배기가스재순환(EGR), 강화된 촉매 등의 기술이 적용되었다. 그 결과 동급의 디젤 엔진 출력 및 토크를 확보하는 한편 최신 배출가스 규제인 Stage-V 수준에서 질소산화물은 절반 수준에 해당하는 배출가스 성능을 달성하였다.

• 드라이브 ㆍ 컨트롤
• /
• 제14권1호
• /
• pp.35-40
• /
• 2017

Whereas fuel economy of a vehicle is measured using a chassis dynamometer, that of construction machinery such as an excavator shall be presumably measured using simulated work cycle. In order to measure fuel consumption under a simulated work cycle, a measurement methodology, while excavator operates in dynamic(transient) motion, needs to be examined and developed. In this work, three methods (gravimetry, ECU CAN signal and mass flow meter) are studied and compared. This work reveals that when ECU CAN signal is properly calibrated and evaluated, compared to gravimetry or mass flowmeter, it could be used to measure fuel consumption with accuracy and thus for approval of the fuel economy of construction machinery.

• 드라이브 ㆍ 컨트롤
• /
• 제20권2호
• /
• pp.24-30
• /
• 2023

This study aimed to analyze the fatigue of forklifts in industrial settings by assessing their stress levels during operation. Strain gauges were affixed to the dynamic components of the forklifts to gather real-time data and enhance the reliability of the analysis. Although monitoring structural loads in harsh testing environments can be challenging, the affixed strain gauges on the dynamic components can provide more precise results and improve the interpretation of data. By creating testing modes that simulate forklift usage environments and performing experiments with selected cargo and driving modes, a comparison of the damage severity of forklift parts under different driving conditions was done. These results can be utilized to forecast the lifespan of forklift parts under extreme driving conditions and assist in the design and optimization of new parts in the future.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제52권1호
• /
• pp.38-44
• /
• 2003

In this study, the balance beam control subsystem, new type of construction machinery using the mechanism of CMG (control moment gyro), for the attitude control of an unstructured object such as a beam carried by a tower crane, is designed and implemented. The balance beam controller consists of a wheel spinning at high speed and an outer gimbal for controlling the attitude of the wheel. Two motors, one for the wheel and the other for the gimbal, are used. Applying force to the spin axis of the wheel, as an input of the system, leads the torque about the axis because of the gyro effects. This torque is used to control the attitude of the unstructured object in this study. For the stabilizer function, in addition, holding the load at the current position, the attitude of the wheel is freed by cutting the power applied to the gimbal motor of the balance beam controller, which result in the braking force to stop the load by gyro effect. The works presented here include the mechanical system of the balance beam controller, the remote controller, the servo controller and the control software for the system. We also present experimental results to show that the system we proposed is useful as a new construction machinery which can control the attitude of the beam hanging from a tower crane.

• 드라이브 ㆍ 컨트롤
• /
• 제17권4호
• /
• pp.1-7
• /
• 2020

In orchard or crop-growing environments, pesticides are sprayed using various nozzles to prevent pests and improve productivity. Nozzles currently in use are restricted for use in multi-purpose environments, thus, it is necessary to develop new nozzles. In this study, new two-phase nozzles are proposed to improve the performance of the nozzle (flow rate, spray angle, spray particle size). The performance of the two-phase nozzles are predicted through the CFD analysis and the performance of the nozzles is compared with the experiment. The experimental results showed that the proposed two-phase nozzles are available at relatively low operating pressure condition and are capable of extensive spray particle size control. Thus, the proposed nozzles are expected to be available in various orchard environments.