• Journal of the Korean Wood Science and Technology
• /
• 제24권3호
• /
• pp.18-27
• /
• 1996

The feasibility of using stress-wave technique in the transverse direction for the assessment of early stages of decay was investigated using compression test specimens having different annual ring orientations subjected to decay by Tyromyces palustris for various time intervals. Decay detection, quantitative assessment of decay, and the prediction of residual strength of decayed wood with less than five percent weight loss can be feasible using stress-wave parameters (wave velocity, wave impedance, and stress-wave elasticity) and their percent reduction due to decay, measured by stress-wave technique in the transverse direction. The use of stress-wave technique in the transverse direction for the application of this technique to structural members in service is desirable, when considering the easiness of attachment of accelerometers of stress-wave measuring device on the surface of members and also accurate detection of localized decayed areas. In stress-wave technique in the transverse direction, stress-wave parameters measured were different according to the angles between wave propagation path and annual ring, due to the anisotropy of wood structure. Therefore, it is recommended to use percent reduction in stress-wave parameters instead of stress-wave parameters. This evaluation method using percent reduction in stress-wave parameters is ideal when it is impossible to observe annual ring orientation on the transverse surface of wood.

• 대한조선학회논문집
• /
• 제60권5호
• /
• pp.305-319
• /
• 2023

This study focuses on measuring the relative wave elevation around the KSUPRAMAX-O ship and comparing it with numerical analysis results (potential and computational fluid dynamics). The relative wave elevation is a good indicator of the pressure distribution on the ship's surface, which is affected by the ship's motion, incident waves, and distributed waves. Prior to measuring the relative wave elevation, a comparative test was conducted on resistance type, capacitance type, and ultrasonic type wave probe to measure the relative wave elevation, and it was confirmed that the resistance type wave probe was suitable for measuring the relative wave elevation. A model test was performed at low speed and design speed using resistance type wave probe and compared with the results of numerical analysis result. As for the motion response, it was confirmed that the result of experiments and the result of the numerical analysis were in good agreement. The relative wave elevation showed a similar trend between the experiment and the computational fluid dynamics, but the potential analysis result showed a difference from the experiment in design speed.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1985년도 학술발표회 논문집
• /
• pp.19-22
• /
• 1985

철(Iron)을 재질로한 ka가 큰 원통에서의 산란파를 측정 분석하였다. ka가 클 경우 산란파는 주로 Geometrical wave에 의해 구성되며, 이 Geometrical wave는 기하광학의 법칙을 따르게 된다. 본 연구에서는 각 mode의 Geometrical wave에 대하여 송.수신 위치에 따른 이론적인 펄스 도달 시간과 측정 분석된 도달시간을 비교하여 Geometrical wave를 관찰하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.302-307
• /
• 2005

Love wave and Rayleigh wave are the major elastic waves belonging to the category of the surface wave. The fact that Love wave is not contaminated by P-wave which makes Love wave superior to Rayleigh wave and other body waves. Therefore, the information that Love wave carries is more distinct and clearer than the information of Rayleigh wave. Based on theoretical research, the joint inversion analysis which is used both Love wave dispersion information and Rayleigh wave dispersion information was proposed. Purpose of the joint inversion analysis is to improve accuracy and convergency of inversion results utilizing that frequency contribution of each wave is different. This analysis technique is consisted of the forward modeling using transfer matrix, the sensitivity matrix determined to the ground system and DLSS(Damped Least Square Solution) as a inversion technique. The application of this analysis was examined through the field test.

• Journal of information and communication convergence engineering
• /
• 제13권1호
• /
• pp.36-41
• /
• 2015

With the rapidly increasing and widespread use of electronic and controlling equipment, the control of the electromagnetic (EM) wave environment becomes an important social issue. To solve the electromagnetic compatibility (EMC, both electromagnetic interface and electromagnetic susceptibility) problems, in this paper, we introduce the countermeasure techniques focused on EM wave absorbers for EMC problems in our laboratory at the Korea Maritime and Ocean University. The current technologies related to EM wave absorbers to solve EMC problems will first be described. The prospects of and a design for EM wave absorbers including a smart absorber with a heat radiating function will then be suggested.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권6호
• /
• pp.1056-1063
• /
• 2015

Waves can be expressed in terms of a spectrum; that is, the energy density distribution of a representative wave can be determined using statistical analysis. The JONSWAP, PM and BM spectra have been widely used for the specific target wave data set during storms. In this case, the extracted wave data are usually discontinuous and independent and cover a very short period of the total data-recording period. Previous studies on the continuous wave spectrum have focused on wave deformation in shallow water conditions and cannot be generalized for deep water conditions. In this study, the Generalized Extreme Value (GEV) function is proposed as a more-optimal function for the fitting of the continuous wave spectral shape based on long-term monitored point wave data in deep waters. The GEV function was found to be able to accurately reproduce the wave spectral shape, except for discontinuous waves of greater than 4 m in height.

• 한국해양공학회지
• /
• 제34권6호
• /
• pp.406-418
• /
• 2020

In this study, a nonlinear wave simulation code is developed using a higher-order spectral (HOS) method. The HOS method is very efficient because it can determine the solution of the boundary value problem using fast Fourier transform (FFT) without matrix operation. Based on the HOS order, the vertical velocity of the free surface boundary was estimated and applied to the nonlinear free surface boundary condition. Time integration was carried out using the fourth order Runge-Kutta method, which is known to be stable for nonlinear free-surface problems. Numerical stability against the aliasing effect was guaranteed by using the zero-padding method. In addition to simulating the initial wave field distribution, a nonlinear adjusted region for wave generation and a damping region for wave absorption were introduced for wave generation simulation. To validate the developed simulation code, the adjusted simulation was carried out and its results were compared to the eighth order Stokes theory. Long-time simulations were carried out on the irregular wave field distribution, and nonlinear wave propagation characteristics were observed from the results of the simulations. Nonlinear adjusted and damping regions were introduced to implement a numerical wave tank that successfully generated nonlinear regular waves. According to the variation in the mean wave steepness, irregular wave simulations were carried out in the numerical wave tank. The simulation results indicated an increase in the nonlinear interaction between the wave components, which was numerically verified as the mean wave steepness. The results of this study demonstrate that the HOS method is an accurate and efficient method for predicting the nonlinear interaction between waves, which increases with wave steepness.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권4호
• /
• pp.520-526
• /
• 2006

Wave Energy is a derivative of the solar energy input to the earth, which is accumulated on open water surfaces by the action of the winds Waves are disturbances in the water surface. This paper is interested primarily in progressive waves, which carry energy from one place to another Waves are irregular in size and frequency. Moreover the surface of the sea is one of the most hostile environments for engineering structures and materials. The idea of harnessing the tremendous power of the ocean's waves is not new. Hundreds of wave energy conversion techniques have been suggested over the last two centuries. Although many WECS (Wave Energy Conversion Systems) have been invented, only a few systems have been tested and evaluated. This paper describes the characteristic of WES (Wave Energy System) in terms of, devices, resource and potential, etc.. Finally, this paper provides a summary of general and specific conclusions and recommendations concerning WECS potential in Korea.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회 논문집
• /
• pp.1073-1077
• /
• 2005

In this study, wave pressure is calculated by using irregular waves in front of a breakwater. In the numerical model, the Reynolds equations are solved by a finite difference method and $k-{\varepsilon}$ model is employed for the turbulence analysis. To track the free surface displacement, the volume of fluid method is employed. The results of two cases present that wave pressure change due to irregular wave similar to wave height of irregular wave. It is observed that wave pressure of Case 2 more bigger than wave pressure of Case 1 at the same position.

• 한국해양공학회지
• /
• 제25권3호
• /
• pp.11-18
• /
• 2011

The rogue wave was generated in a two-dimensional wave tank the rogue wave kinematics was investigated including local and convective accelerations of the water particle and verification of existing prediction methods. PIV technique was applied to measure the wave kinematics near the wave crest which extended to compute the local and convective accelerations. The experimental results were compared with several analytical predictions. The convective acceleration under the crest of rogue wave has a similar magnitude with the local acceleration.