• Journal of Advanced Marine Engineering and Technology
• /
• 제32권1호
• /
• pp.169-174
• /
• 2008

Floating devices, such as a cavity resonance device take advantage of both the water motion and the wave induced motions of the floating body itself. The wave energy converter is known commercially as the WAGB(Wave Activated Generator Buoy) and is used in some commercially available buoys to power navigation aids such as lights and horns. This wave energy converter consists of a circular floatation body which contains a vertical center pipe that has free communication with the sea. A theoretical analysis of this power generated by a pneumatic type wave energy converter is performed and the results obtained from the analysis are used for a real wave energy converter for buoy. This paper presents the analysis results and the design method for the WEC(Wave Energy Converter), and the associate results are application to the commercially available WEC for buoy. Maximum performance of WEC occurs at resonance with driving waves. The analysis of WEC is performed with LabVIEW program, and the design method of WEC for buoy is suggested in this paper.

• 한국산학기술학회논문지
• /
• 제15권3호
• /
• pp.1691-1699
• /
• 2014

IEEE에서는 V2I, V2V 등의 무선 통신 기능을 제공하여 차량 운행의 안전을 증대 시킬 수 있는 WAVE 규격을 정의하고 있다. WAVE 규격에서는 무선 통신이 갖는 보안 취약성을 극복할 수 있도록 메시지의 암호화 및 인증 기능을 지원하고 있다. 본 논문에서는 WAVE 규격에서 지원하고 있는 보안 알고리즘들을 openssl 라이브러리와 C언어로 구현하였으며, 구현된 알고리즘들은 관련 규격들에서 제시하고 있는 테스트 벡터를 이용하여 정상 동작을 확인하고 성능을 측정하였다. 본 논문에서 구현된 보안 알고리즘들은 플랫폼에 독립적으로 구현되어, WAVE 보안 규격의 구현에 활용될 수 있을 것으로 생각된다.

• 대한조선학회논문집
• /
• 제42권3호
• /
• pp.205-211
• /
• 2005

In this study, a new numerical procedure for the generation of a nonlinear tailored group of waves is presented. The procedure is based on the transient wave group technique. In order to integrate the nonlinearity during the wave propagation in the computational method, the Navier-Stokes equations are applied as governing equations. The governing equations are discretized by finite volume approximation. The deformation of the free water surface in each time step is pursued with a moving grid. A two-dimensional, numerical wave tank for the simulation of the wave propagation is developed and tested in detail. The numeric results are compared first with analytical wave theories and with measurements, in order to examine the correctness of the numerical wave tank. Wave surface elevation and associated fields of velocity and pressure are numerically computed and compared with measurements. Very good agreements show up.

• 한국멀티미디어학회논문지
• /
• 제19권8호
• /
• pp.1377-1385
• /
• 2016

Conventional X-band marine radar has been used as one of the effective tools for collecting and retrieving ocean surface information parameters for three decades. Several wave information extracting algorithms have been designed in such a way that they can be utilized for efficiently estimating sea surface wave parameters such as current velocities, wave direction, significant wave heights in VTS (Vessel Traffic Service). However, their performances are still restricted. For the purpose of overcoming the performance limits, in this paper, first the conventional algorithms are analyzed and their performances are compared, and then a new control algorithm is proposed. Furthermore, we try to improve the estimation performances of typical wave parameters including wave directions and significant wave heights by introducing linear regression model in the process of computing wave information extraction. Through several simulations with the X-band radar images, it is shown that the proposed method is very effective in estimating the wave information compared to the real measured buoy data.

• 한국해안·해양공학회논문집
• /
• 제27권4호
• /
• pp.274-279
• /
• 2015

동해 중부에 위치한 속초항 연안에서 약 11년간 취득한 파랑자료를 스펙트럼법과 파별분석법을 사용하여 분석하고 대표적인 파랑 특성을 검토하였다. 유의파고는 동계에 크고 하계에 작으며, 첨두주기도 동계에 길고 하계에 짧은 특성을 나타내었다. 관측된 최대 유의파고는 8.95 m 였으며 동해선풍에 의하여 발생되었다. 유의파고와 첨두주기 모두 그 분포 형태를 Generalized Gamma 및 Generalized Extreme Value 분포함수보다는 Kernel 분포함수가 보다 잘 재현하였다. 한편, 인근 해역에서의 설계 및 시공에 도움을 줄 수 있도록 파고 자료를 월별 및 파고 구간별로 세분하고 누적출현율을 제시하였다.

• 대한조선학회논문집
• /
• 제56권5호
• /
• pp.418-426
• /
• 2019

To derive a simplified analytic solution which can be utilized as a fundamental solution for the wave maker design, a segment of the wave board has been idealized as a submerged line segment in a two dimensional domain of a wave flume. The lower end of the line segment could be located at arbitrary depth of the wave flume and the upper end of the board could be also submerged to any depth from the free surface. The freely oscillating motion of the wave board is assumed to be defined by determining the condition of horizontal oscillation on both ends differently. The submerged wave board oscillating in horizontal direction could be specified by selecting the amplitude, frequency and the phase lag differently on lower and upper ends of the board. The simplified two dimensional wave generated by the wave board segment has been obtained by the first order perturbation method. It is found that the general solution of the freely oscillating wave board in two dimensional domain could be decomposed into the solution of flap motion with lower end hinge and swing motion with upper end hinge. The case study of the analytic solutions has been carried out to evaluate the effect on the wave height due to the difference of oscillation frequency, phase difference and variation of stroke between for the motion of both ends. It is found that the solution of the freely oscillating wave board could be utilized for the development of high performance wavemaker especially for irregular waves.

• Journal of Preventive Medicine and Public Health
• /
• 제34권4호
• /
• pp.316-322
• /
• 2001

Objectives : To explore the possible effect of an interaction between summertime heat waves and ozone on cardiopulmonary mortality during the 1994 heat wave in Korea. Methods : The unusually hot summer of 1994 in Korea was defined as the heat wave in this study. We examined the associations of air pollutants with daily cardiopulmonary deaths between 1991-1995, considering the product term of the heat wave and each pollutant, weather and time trends. Results : During the heat wave, while temperatures were uniformly higher than those of other summers, the within-heat-wave difference in mortality paralleled that in the regional ozone levels. In terms of the influence of the heat wave, the results of ozone were different to those of total suspended particles (TSP) and sulfur dioxide $(SO_2)$. The ozone association (relative risk (RR) : 1.036; 95% confidence interval (CI) = 1.018-1.054) was observed only under heat wave conditions, while the TSP (RR : 1.006, 95% CI = 0.999-1.012) and the $SO_2$ (RR = 1.018, 95% CI : 1.011-1.024) associations were found under normal weather conditions (per interquartile increase of each pollutant; results of three pollutants model). The ozone association under heat wave was attributable to the statistical interaction between the heat wave and ozone. Conclusions : These results support the possibility of a biological synergy between the heat wave and ozone, one that is not evident between the heat wave and other major pollutants like particles or $SO_2$.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2017년도 춘계학술발표대회
• /
• pp.102-105
• /
• 2017

본 논문은 기존 국내의 ITS방식인 DSRC의 단점을 보완하기 위해 무선전송 기술인 WAVE를 적용한 WAVE/DSRC 플랫폼 기술 연구에 대해 소개한다. 우선, WAVE/DSRC플랫폼의 소프트웨어 구성도와 그에 따른 WAVE 및 DSRC 태스크 동작 구조 및 컨트롤러에 대해 기술하였다. WAVE/DSRC플랫폼을 적용하여 기존의 ITS방식인 DSRC의 단점을 보완하여 보다 정확하고 신뢰성있는 서비스를 제공 할 수 있다.

• 한국항해항만학회지
• /
• 제34권4호
• /
• pp.299-304
• /
• 2010

In this paper, the EM wave absorber was developed for the 94-GHz detecting radar system. To analysis an EM wave absorber in millimeter wave band, we fabricated three absorber samples using carbon black and titanium dioxide and permalloy with chlorinated polyethylene. After measuring the complex relative permittivity, the absorption characteristics are simulated by 1D FDTD according to different thicknesses of less than 1.0 mm. Then, the EM wave absorber was fabricated based on the FDTD simulation. As a result, the measured results agreed well with the simulated ones, and the developed EM wave absorber with a thickness of 0.7 mm had the desired absorption characteristics of more than 14 dB in the frequency range of the 94-GHz band.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 춘계학술대회
• /
• pp.395-398
• /
• 2018

C-ITS 통신프로토콜과 이동 통신 프로토콜인 Legacy LTE 통신을 복합적으로 지원하는 하이브리드 V2X 통신시스템을 구현하기 위한 하드웨어 및 소프트웨어에 대한 설계 방안과 설계과정을 제시한다. 하이브리드 V2X 통신시스템은 복수의 통신기술로 WAVE와 LTE를 지원하고, WAVE에 대해서는 복수채널 통신을 지원하여, 자율주행 차량에 LDM, 측위보정정보 등의 도로정보를 실시간으로 전달하기 위한 목적으로 설계하였다.