• Journal of the Korea Convergence Society
• /
• v.2 no.1
• /
• pp.51-56
• /
• 2011

As fusion and composition of a game genre is actively achieved, game types where various genres coexist in a game increase. These games have advantage providing various funnies to game players. This study examines and analyzes game examples of fusion and composition genre that appear in the game market in accordance with such a trend. We suggested a game that can give new joy to players by application of fusion and composition of genre within the body type that can provide directly virtual experience of the given game situation on the base of this study.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.956-960
• /
• 2006

Deep-blue organic light-emitting diodes (OLEDs) with/without ultra-thin LiF layer inserted at the interface between hole-blocking and electron-transporting layers have been fabricated and investigated. The fundamental structures of the OLEDs are ITO/m-MTDATA/NPB/BCP/LiF (with/ without)/ $Alq_3/LiF/Al.Deep$ blue light emission with CIE coordinate of (0.15, 0.11) has been achieved for all devices. Further, by inserting LiF with thickness of 1nm at the interface between BCP and $Alq_3$ layer, the luminous efficiency as well as the power efficiency is much improved compared to that without. The enhancement of electron injection due to insertion of LiF may account for this improvement.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.295-298
• /
• 2003

Reflective mode liquid crystal on silicon (LCoS) microdisplay is the major technology that can produce extremely high-resolution displays. A very large number of pixels can be packed onto the CMOS circuit with integrated drivers that can be projected to any size screen. Large size direct-view thin film transistor (TFT) LCDs becomes very difficult to make and to drive as the information content increases. However, the existing LC alignment technology for the LCoS cell fabrication is still the mechanical rubbing method, which is prone to have minor defects that are not visible normally but can be detrimental if projected to a large screen. In this paper, application of photo-alignment to LCoS fabrication is presented. The alignment is done by three-step exposure process. A MTN $90^{\circ}$ mode is chose as to evaluate the performance of this technique. The comparison with rubbing mode shows the performance of photo-alignment is comparable and even better in some aspect, such as sharper RVC curve and higher contrast ratio.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.405-412
• /
• 2006

Among the various problems involved in the structural analysis of the Korean traditional wooden structure, the analytical model for the Kong-Po is controversial subject as usual. While some experiments are tried for establishing the basis of analytical models, most of these experiments are performed using scale down specimens. So, it is not possible to apply these experimental results to structural analysis of Korean traditional wooden structure directly. A numerical study for analogizing the stiffness of full scale Kong-Po structure is performed on the basis of experimental specimen. Some parameter studies using finite element method are made in this study. The finite element analysis used in this study is geometric material nonlinear analysis. The stiffness of Kong-Po structure found out in this study can be used for modelling the joints of the Korean traditional wood structure in frame analysis.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.9
• /
• pp.5351-5354
• /
• 2013

Four hundred and thirty-five Chinese smokers who had attended the first smoking cessation clinic and received stage-matched individualized cessation counseling in Hong Kong during the period of August 2000 to January 2002 were successfully followed-up between February and August 2008. Some 38% of the participants (165/495) had stopped smoking during the 12-month follow-up after treatment. Participants with higher conscientiousness score (OR = 1.65, 95% CI: 1.09 - 2.48) and lower openness to experience score (OR = 0.64, 95% CI: 0.45 - 0.92) showed a greater likelihood of quitting smoking after controlling the effect of daily cigarettes smoked and stage of readiness at baseline. The study suggests an important role of conscientiousness and openness to experience on long-term quitting behaviors following treatment, and provides useful information for the development of matched intervention for smoking cessation among Chinese smokers.

• Journal of Animal Science and Technology
• /
• v.55 no.6
• /
• pp.551-557
• /
• 2013

This study was conducted to analyze the genotypes and genes of FABP3 (Fatty-acid Binding Protein 3) in pigs using MSPI restriction enzyme and electrophoresis. Analysis of data collected from a total of 210 crossbred pigs (LYD or YLD) in Chungcheongnam-do, Korea, revealed the following. The AA genotypes of FABP3 were detected in the 750 bp and 100 bp bands, while the Aa heterotype appeared in the 850, 750 and 100 bp bands and the aa recessive homotype was detected in a single band of 850 bp. The genotype frequency of AA, Aa and aa was 46.67%, 51.43% and 1.90%, respectively. The genetic equilibrium of this population showed a significant difference (p<0.001) based on a ${\chi}^2$-test. The carcass weight, backfat thickness, marbling score, pH, drip loss, cooking loss, and meat color based on the CIE $L^*$, and $b^*$ values according to genotypes of FABP3 did not differ significantly (p>0.05); however, the CIE $a^*$ values did (p<0.05).

• Journal of Fashion Business
• /
• v.17 no.6
• /
• pp.141-157
• /
• 2013

In this study, we analyzed the figure type and lower-body size of Shanghai and Hong Kong adult women in their early twenties using the data obtained from 3D whole body scanners. We also provided concrete information related to women's lower bodies, in terms of crotch width, crotch length, inseam, outseam, slope of waist, etc., among women in Shanghai and Hong Kong. The result may be useful to the Chinese apparel industry when designing trouser pants for adult women. According to the results of the factor analysis for categorizing the body shape of the lower half, 5 factors were obtained: obesity of the lower half factor, height of the lower half factor, length from waist to the crotch factor, factor related to legs, and shape of the abdomen factor. After performing a cluster analysis according to the factor analysis, three clusters were set: Cluster 1 was represented as the lower half growth type, which has a high value in height of the lower half factor and grows in the abdomen part. Cluster 2 was represented as thin legs type, which has a low value in most part compared to the length of leg bones and factors about legs that have high value. Cluster 3 was represented as the obesity type having a high value in the obesity of the lower half factor. Overall, thin legs type achieved a high rate in Shanghai adult women and obesity type received a high rate in adult women living in Hong Kong.

• Steel and Composite Structures
• /
• v.2 no.6
• /
• pp.441-460
• /
• 2002

In the design of bridges, it is important to consider the thermal stresses induced by the non-linear temperature distribution as well as the variation of effective temperature in the bridge deck. To cope with this, design temperature profiles are provided by design codes, which are normally based on extensive research work. This paper presents the results of a comprehensive investigation on the thermal behaviour of bridges in Hong Kong with special emphasis on composite bridges. The temperature distribution in bridges depends primarily on the solar radiation, ambient air temperature and wind speed in the vicinity. Apart from data of the meteorological factors, good estimates of the thermal properties of material and the film coefficients are necessary for the prediction of temperature distribution. The design temperature profiles for various types of composite bridge deck with bituminous surfacing and concrete slab of different thicknesses are proposed. The factors affecting the design effective temperature are also reviewed and suitable values for Hong Kong are proposed. Results are compared with recommendations of the current local code. The method facilitates the development of site-specific temperature profiles for code documents, and it can also be applied to create zoning maps for temperature loading for large countries where there are great climatic differences.

• Wind and Structures
• /
• v.9 no.5
• /
• pp.387-396
• /
• 2006

This paper presents the wind characteristics of Typhoon Dujuan as measured at a 50 m guyed mast in Hong Kong. The basic wind speed, wind direction and turbulent intensity are studied at two measurement levels of the structure. The power spectral density of the typhoon is compared with the von Karman prediction, and the coherence between wind speeds at the two measurement levels is found to This paper presents the wind characteristics of Typhoon Dujuan as measured at a 50 m guyed mast in Hong Kong. The basic wind speed, wind direction and turbulent intensity are studied at two measurement levels of the structure. The power spectral density of the typhoon is compared with the von Karman prediction, and the coherence between wind speeds at the two measurement levels is found to compare with Davenport's prediction. The effect of typhoon Dujuan on the response of the structure will be discussed in a companion paper (Law, et al. 2006).with Davenport's prediction. The effect of typhoon Dujuan on the response of the structure will be discussed in a companion paper (Law, et al. 2006).

• International Journal of High-Rise Buildings
• /
• v.6 no.2
• /
• pp.139-147
• /
• 2017

Analyzing morphological evolution over a long period of time is deemed an effective way to identify problems occurring in the process of urban development, in addition to achieving a fundamental understanding of socio-cultural changes and growth rooted from the context. As far as the urban morphology is concerned, Hong Kong is characterized by its unique high-density and compact layout patterns, which have aroused the interest of a number of authors in the urban design domain. Whilst an increasing number of redevelopment projects in Hong Kong were criticized for ignoring and destroying the old urban fabric, there is a need for research to investigate the origins and changes of various urban patterns and their implications for society. By employing the theories and techniques of space syntax, this paper accordingly provides a morphological analysis based on the Wanchai District - a 'Segment-line' city, which particularly epitomizes various urban grids of Hong Kong and may have different implications for functional aspects. By axial-mapping the urban layouts of five stages of growth since 1842 and subsequently investigating their spatial and functional transformation over the past 170 years, this paper identifies a series of spatial characteristics underlying different grid patterns, as well as achieves a precise understanding of their ever changing relationship. Based on these understandings, this paper intends to provide valuable reference and guidance for upcoming spatial development in Hong Kong and other regions.