• Asian Journal of Atmospheric Environment
• /
• v.12 no.3
• /
• pp.274-288
• /
• 2018

Quantitative data of 50 non-polar organic compounds constituting $PM_{2.5}$ were continuously collected and analyzed from June 2016 to October 2017 (approximately 17 months) at Ichihara, one of the largest industrial areas in Japan. Target non-polar organic compounds including 21 species of polycyclic aromatic hydrocarbons (PAHs), 24 species of n-alkanes and 5 species of phthalate esters(PAEs) were simultaneously measured by gas chromatography/mass spectrometry. Basically, the average concentrations of the total PAHs, n-alkanes and PAEs in each season remained nearly level, and seasonal variations were little throughout the study period. These results suggest that the emission sources, which are not influenced by the seasons, are the dominant inputs for the target organic compounds. Diagnostic ratios of PAHs, assessment of n-alkane homologue distributions, carbon preference index, and the contribution of wax n-alkanes from plants were used to estimate source apportionments. These results indicate that anthropogenic sources were the main contributor for most PAHs and n-alkanes throughout the study period. The concentrations of PAEs selected in this study were low because emission amounts of these chemicals were little within the source areas of the sampling site. To our knowledge, this study is the first attempt to simultaneously measure a high number of non-polar organic compounds in $PM_{2.5}$ collected from the ambient air of Japan, and the resultant data will provide valuable data and information for environmental researchers.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.48 no.7
• /
• pp.3-14
• /
• 2006

The objective of this study was to develop a GIS-based decision support system (GIS-USLE system) to estimate soil erosion and evaluate its effect on concentrated upland plots in Godang district, Korea. This system was developed for the ArcView environment using A VENUE script. Three modules were used in the GIS-USLE system, namely pre-processing, the USLE factors calculator module, and post-processing. This system benefits from a user friendly environment that allows users with limited computer knowledge to use it. This system was applied to 1,285 individual upland plots ranging from 0.005 to 1.347 ha in size with an average slope steepness of 14 %. The rainfall distributions were estimated using the three methods, namely Mononobe and Yen-Chow with Triangle and with Trapezoid type, and then used to calculate the rainfall erosivity factor. The soil erosion amounts from the 1,285 individual plots in the study area by 2 year return period with a 24h maximum rainfall amount of 154.6 mm were estimated at 5 tons/ha on average. Slope appeared to be the most important factor affecting soil erosion estimation, as expected. The prototype model was applied to the project area, and the results appeared to support the practical applications. By examining many fields simultaneously, this system can easily provide fast estimation of soil erosion and thus reveal the spatial pattern of erosion from fields in a region. This study will help estimate and evaluate soil erosion in concentrated upland districts and identify the best management practices.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.31 no.3
• /
• pp.60-66
• /
• 2018

Objectives : The purpose of this study is to review the chinese published papers on cauterization of traditional chinese medicine. Methods : We searched chinese published papers from 1958 until May 2017 via CNKI(China National Knowledge Infrastructure) with the keyword "cauterization". We analyzed the studies covered cauterization medical treatment, and classified them by 5 categories including periods, type of study, treatment site, experiment target site, and cauterizing method. Results : We reviewed 112 chinese papers which include 10 Original articles, 43 Review articles, and 59 Case reports. Examining yearly distributions, we can see that research on cauterization is becoming more active than in the past. In classification of 93 clinical studies by treatment site, the number of research on Tonsillitis accounts for almost half(43 studies), followed by Sore throat(14 studies). Among 10 experimental studies, Eye is the most frequently targeted organ which was used to study high intra-ocular pressure(5 studies), and retinal ganglion cell(2 studies). Lastly, there are various methods of cauterization used in papers: Branding iron(54 studies), and Red-hot needle(24 studies) are two major heating methods. Conclusions : This analysis shows that studies on the application of cauterization have been actively conducted in China these days. Furthermore, up-to-date cauterizing methods have been developed such as electric type and microwave type beyond traditional ways. We expect this article will encourage further research on cauterization in order to apply it to a variety of diseases. Then, it could become one of new effective medical treatments in Korean medicine.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.10
• /
• pp.4814-4834
• /
• 2018

This paper presents an architecture for wireless sensor networks (WSNs) with blind source separation (BSS) applied to retrieve the received mixing signals of the sink nodes first. The little-to-no need of prior knowledge about the source signals of the sink nodes in the BSS method is obviously advantageous for WSNs. The optimization problem of the BSS of multiple independent source signals with complex and noncircular distributions from observed sensor nodes is considered and addressed. This paper applies Castella's reference-based scheme to Novey's negentropy-based algorithms, and then proposes a novel fast fixed-point (FastICA) algorithm, defined as the reference-signal negentropy complex FastICA (RSNT-cFastICA) for complex-valued noncircular-distribution source signals. The proposed method for the sink nodes is substantially more efficient than Novey's quasi-Newton algorithm in terms of computational speed under large numbers of samples, can effectively improve the power consumption effeciency of the sink nodes, and is significantly beneficial for WSNs and wireless communication networks (WCNs). The effectiveness and performance of the proposed method are validated and compared with three related BSS algorithms through theoretical analysis and simulations.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.4
• /
• pp.1-8
• /
• 2013

Many PE (pre-erection) blocks are supported by wooden, concrete, or steel supports when they are stocked in the outdoor areas of a shipyard. Their positions and numbers are planned on the basis of the workers' experience. Recently, many shipyards have been making PE blocks with various shapes and weight distributions because of the variety of ships and building technologies. Therefore, it is now necessary to deal with blocks that they have no experience with. We propose a method to conveniently and quickly evaluate the structural safety of PE block supports, without the need for special knowledge and technology related to structural analysis. This method can reduce the large number of man hours (MH) normally needed for the analysis. The three-dimensional grillage analysis is performed for a simplified grillage model of a PE block. For efficiency, the grillage model of the PE block is automatically built from its three-dimensional CAD model, and its weight is also automatically distributed on the grillage model. The integrated system has been comprehensively implemented to perform the grillage analysis for the reaction forces on block supports. This paper describes how to make a grillage model of a PE block and estimate the weight distribution of the block on this grillage model. These steps are verified by comparing the supports reaction forces to those of the 3D finite element analysis for the PE blocks that are provided by a shipyard.

• Magazine of the Korea Concrete Institute
• /
• v.9 no.2
• /
• pp.121-132
• /
• 1997

The thermal behavior of' concrete can be ch;lracterized from a knowledge of concrete ternperatu1.e at early ages, environmental conditions, and cement hydration in the mixture. 'l'o account for thost. interactions, a computer model was developed for prwlicting the temperature pr.ol'ile in hnrdcning c o n c r c t ~ st.r~icture in terms of material and tmvironmcntal factors. The cerncnt hydration cha~.acteristics such as the activating energy, total heat 1ihei.atr.d. anti th\ulcorner degree of' hydration. can represent the internal heat gc,neration. In this study. th(> activating c1ncrgy and the tlcgree of' hydration curve were determined well fmm the rnortn~. compressive strength tests while total amount of heat liberated was determined by tht> isothermal calorimctcr method. The main purpose of' this study is to correlate measured tt>mperaturr distributions in a concrete st1,ucture during thc hardening process with the ~ c s u l t s computed f'ro~n theoretical considrl.ations. Using twodimensional heat transfer model, first. the importance of several parameters will be identified by a parametric analysis. Then, the tcmpcmture distribution of thc cylindrical concrete specimen in the laboratory was mensuwti and compared with that yielded by thc theoretical considel.ations.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.1
• /
• pp.122-126
• /
• 2008

Integrating a 3D solid modeler with a general purpose FEM code, an automatic stress intensity factor analysis system of the 3D crack problems has been developed. A geometry model, i.e. a solid containing one or several 3D cracks is defined. Several distributions of local node density are chosen, and then automatically superposed on one another over the geometry model by using the fuzzy knowledge processing. Nodes are generated and quadratic tetrahedral solid elements are generated by the Delaunay triangulation techniques. Finally, the complete finite element(FE) model generated, and a stress analysis is performed. This paper describes the methodologies to realize such functions, and demonstrates the validity of the present system.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1687-1692
• /
• 2004

Airflow in the nasal cavity of a normal Korean adult is investigated experimentally by tomographic PIV measurement. Knowledge of airflow characteristics in nasal cavities is essential to understand the physiology and pathology aspects of nasal breathing. Several studies have utilized physical models of the healthy nasal cavity to investigate the relationship between nasal anatomy and airflow. All of these researches on nasal airflow are under the condition of constant flow-rate. In this study, nasal cavity flow with the physiological period is investigated by tomographic PIV, for the first time. A pumping system that can produce the periodic flow is created. Thanks to a new method for the model casting by a combination of the rapid prototyping and curing of clear silicone, a transparent rectangular box containing the complex nasal cavity can be made for PIV. The CBC PIV algorithm is used for analysis. Phase-averaged mean and RMS velocity distributions are obtained for inspirational and expiration nasal airflows. The comparison with the constant flow case is appreciated. There exist many flow patterns depending on each phase.

• Journal of Information Technology and Architecture
• /
• v.9 no.3
• /
• pp.323-331
• /
• 2012

With the advancement of the area of knowledge and information, Intellectual Property, especially, patents have captured attention more and more emergent. The increasing need for efficient way of patent information search has been essential, but the prevailing patent search engines have included too many noises for the results due to the Boolean models. This has occasioned too much time for the professional experts to investigate the results manually. In this paper, we reveal the differences between the conventional document search and patent search and analyze the limitations of existing patent search. Furthermore, we propose a specialized in patent search, so that the relationship between the keywords within each document and their significance within each patent document search keyword can be identified. Which in turn, the keywords and the relationships have been appointed a ranking for this patent in the upper ranks and the noise in the data sub-ranked. Therefore this approach is proposed to significantly reduce noise ratio of the data from the search results. Finally, in, we demonstrate the superiority of the proposed methodology by comparing the Kipris dataset.

• Health Policy and Management
• /
• v.25 no.3
• /
• pp.240-251
• /
• 2015

Background: Dentist's income is quite variable. We investigate the factors underlying the distribution of dental revenue and dentist income. Methods: Financial and structural variables of private dental practices(N=13,967) were examined with 2010 Economic Census microdata which include non-insurance revenue. We conducted quantile regression method(QRM) and ordinary least square(OLS) in treating skewness and heteroskedasticity of distributions. The effective estimation for the upper and lower range of distribution becomes possible by QRM. Results: Mid-career dentists are shown to have higher revenue and income. Male dentists achieve the higher revenue and income than female dentists in all quantiles. Group practices show lower income per owner than solo practices significantly. The revenue and income are increased with increasing size of clinics. The high cost in renting the clinic office is found to have a big positive effect on the revenue but a little positive effect on the income. Interestingly the density of dentists shows negative effect on the lowest quantile of the revenue but positive effect on the highest quantile. The lowest quantile of the revenue in the capital areas have the relatively high revenue. The lowest quantile of the income in metropolitan city show higher income than those in other areas significantly. Conclusion: The suggested QRM is shown to have more effective and efficient tool in finding out determinants of dentists' revenue and income of our concern. The results of this study are expected to be employed for dentists preparing for the opening practices in their organizational settings and locational selections. The distributional efficiency of dental human resources could be accomplished if policy makers guide dentists with this knowledge.