• Journal of the Korean Arthroscopy Society
• /
• v.2 no.2
• /
• pp.129-134
• /
• 1998

The arthroscopic ACL reconstruction using the bone-patellar tendon-bone has been considered as the gold standard in the treatment of the ACL insufficiency. There are many reports about the good functional outcome and the restored stability of the knee joint. But there are a few reports showing whether this surgery has good results in the patients' satisfaction. The purpose of this study is to evaluate the patients' satisfaction in this surgery. Authors analysed 32 cases who had taken the ACL reconstruction from Jannuary, 1989 to June, 1997. The average follow-up was 40 months. At the last follow-up, 32 patients reported the patients' satisfaction degrees(four degrees; very satisfied, generally satisfied, improved, no change or aggravated), KT-1000 arthrometer test, Vastus atrophy(thigh circumference), and three kinds of the knee scores(Lysholm, HSS, IKDC). Among the 32 cases, 12 cases (37.5%) were very satisfied, 17 cases(53.1%) were generally satisfied and 3 cases(9.4%) were improved. No case showed no change or aggravated. The satisfaction degree in this surgery had little relation with the age, operation time, follow-up period, combination of meniscectomy, but had significant relations with anteroposterior stability evaluated by KT-1000, thigh circumference measurements and the functional scoring of the knee(Lysholm, HSS, IKDC scores).

• The Research Journal of the Costume Culture
• /
• v.8 no.4
• /
• pp.577-586
• /
• 2000

The objectives of this study were to develope slacks basic block to be used for improving the attactive silhouette and bodily fitness in ready-to-wear and educational patterns. The subjects were from 20 to 24 years old and twenty six body measurements were taken on the National Anthropometric Survey of Korea in 1977. The women in 20's think ideal body shapes are high stature, long legs, slander waist, hip, abdomen, thigh, ankle and light weight. And so it needs to be studied to studied to make slacks pattern which show slander girth and long length. The study was carried out by the following procedures. 1. Through the comparative investigation on the conventional slacks patterns of System M. Muller & Sohn, Secolli, 文化's in Japan, and Won-ja Rim's and the clothing experiment, the characteristics of every four patterns were found. 2. According to the center back slant, reflecting the change of waist circumference, thigh circumference, back crotch length, and the new suitable slacks pattern was achieved. 3. The sensory evaluation for appearance and comfort was applied to evaluate the new slacks pattern by comparing with the conventional slacks pattern. From the result of the sensory evaluation, it was found that the new slacks pattern was more suitable for appearance. 4. The new slacks pattern for women in their 20's were developed as follows ; The waist line came down 2 ㎝, the waist circumference was plus 2㎝ than originally, and the back hip circumference was larger 1 ㎝ than the front hip, the slacks length was created stature/8×4.9, the knee length was stature/8×2.7. The center back crotch length was interspaced 1∼1.5㎝ at the center front, and was at right angle the point which was raised 5㎝ at the side front. This size is not the absolute size but it helps to make the surplus on any other ready-made slacks for women.

• Journal of Fashion Business
• /
• v.22 no.2
• /
• pp.27-39
• /
• 2018

This study analyzed the body shape of women over 70 years and classified their body shapes in order to provide basic data for the development of pants patterns that can complement the weakness of the body shape of elderly women. It were analyzed using SPSS Ver. 20.0. Five factors were extracted from the lower body: obesity and thigh thickness, lower body length, under knee thickness, ankle height, and hip sag. In type 1, the lower body was obese and the legs were thick, but the hips were not sagging. It was named 'high-hip obesity figure'. Type 2's abdomen, hip, and waist were obese, but the legs were thin and the hip were not sagging. Thus, 'bird-leg middle obesity figure' was the name. Type 3 had a long and slender lower body, but legs were thick and the hips were saggy, it was named 'strong-leg low-hip slender figure'. The elderly women showed less difference in waist, abdomen, and hip circumference. The abdominal circumference was 2-3cm more than the waist and hip circumference; hence there is a need to differentiate the shape and number of darts in the production of bottom-wear patterns for older women. In addition, the leg circumference is gradually reduced by aging compared to the size of the lower body. Therefore, it would be necessary to search for a method that can effectively design the difference between the hip circumference and the leg circumference in relation to the body shape and the aesthetics of older women.

• Journal of Fashion Business
• /
• v.12 no.1
• /
• pp.93-108
• /
• 2008

This study held physical measurement for male subjects in their 20s living in Ningbo City, Zhejiang Province in China, showing the biggest market in men's clothes. Their representative lower body types with average shapes and sizes were chosen so as to develop men's slacks patterns with better dimension fitness. The following are the results of the analysis: 1. Slacks patterns were made based on the mean measurement values of 5 people, who were closest to the representative body types, from the index*absolute group of 47 people. The dimensions of application for slacks pattern-making were 77cm(omphalion waist circumference), 91cm(hip circumference), and 103cm(slacks length). 2. For the comparison of high-fitness and more-room pattern dimensions, 5 styles of slacks were made: Korean, Chinese, British, Japanese, and industrial. In the dressing fitness tests, industrial patterns had excellent appearance and Japanese ones had the best function. 3. Based on the analysis results of slacks pattern comparison, the target slacks were experimentally made and received superior evaluation points to the compared slacks patterns in two times of evaluation for appearance and function. 4. The final slacks pattern in this research had the following dimensions: front waist circumference: W(1-2cm with room included)/4-1cm, back waist circumference: W/4+1cm, front hip circumference: H(9$\sim$10cm with room included)/4-1cm, back hip circumference: H/4+1cm, crotch length: H/4-1.5cm, hip length: crotch length-H/12, front crotch extension: H/16-1.5cm, back crotch extension: H/8+3cm, knee line: 33cm below crotch line, front tuck amount: 4cm, back dart amount: 2.5cm(center) and 1.5cm(side), and back dart length: 10cm (center) and 6cm(side).

• Journal of the Korean Society of Clothing and Textiles
• /
• v.48 no.3
• /
• pp.528-542
• /
• 2024

The aim of this study was to analyze and typify the body shape of tall women aged 20-69 using 3D measurement data from the 2020 8^th Human Dimensions Survey data with greater than 165.0 cm in height defined as large stature. Each body type's characteristics were examined to derive points of differentiation compared to women of average body type. The analysis showed that as height increases, body height, length, and generally body circumference, thickness, and width also increase. However, taller women were found to have thinner waists, indicating a wider, flatter waist area. Waist circumference was also smaller, albeit not at a statistically significant level. Body shapes of adult women over 165.0 cm tall were classified into three types. The following body types were analyzed: thick ankles and drooping shoulders, thin and short torso, tall and long, long torso and thick ankles, large body circumference, thickness and width, normal torso length, and short stature and thin ankles. To develop garments for adult women over 165.0 cm tall, a new drafting method was required set the waist, knee height, and shoulder width.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.1
• /
• pp.184-195
• /
• 2017

Baseball is a life sport that gives vitality to people. However, currently available leg guards do not have a variety of sizes and it is very difficult to purchase a leg guard that is suitable for the size of a specific consumer. Therefore, this study investigated the size system of a leg guard sold in the market and suggested a grading deviation suitable for the legs of Korean males. The results of the study were as follows. First, most brands were sold only in three size systems as children's, teenagers, and adults. Adult size systems were not subdivided. Second, Korean male legs were classified into Group 1 (large girth and height and lower body muscle) and Group 2 (small girth and height and low underbody muscle). Third, the size system is based on vertical items such as height and mid-thigh circumference. Each group produced 10 sizes. The smallest height or the largest height was also found to be about 4.5 to 5.0cm smaller or larger than the sample size for each group. The total length of the leg guard was about 2.5cm when the height was increased or decreased by one size. It was confirmed that the deviation of the circumference of the mid-thigh should be about 2.0cm larger or smaller than the sample size even if the height is the same. The deviation of the knee circumference and ankle circumference was smaller than the other circumference. In conclusion, the dimension combinations of the leg guard must be set differently to provide a leg guard with high size suitability according to leg type.

• Fashion & Textile Research Journal
• /
• v.13 no.1
• /
• pp.116-129
• /
• 2011

The purpose of this study is to research on changes of body surface according to golf movements in designs of golf slacks pattern and reflect it to designs of golf slacks pattern to enhance adaptability. For the first stage of this study, length of body surface was analyzed by using 3D body shape. In second stage, analysis of wearing test of golf slacks is performed to extract major pattern design factor of golf slacks and then research patterns were designed. In third stage, 4 differently designed 1st, 2nd slacks were used for analysis of 3D Clothing air volume. The results of this research is as follow. The variation rate of body surface length according to golf swing posture resulted the longest on back swing posture and follow through posture. Waist circumference-omphalion, thigh and ankle circumference increased more than 10% of body surface during golf swing. Front waist circumference-omphalion, right waist to hip length, left waist to hip length and right back center length were decreased more than 10%. As a result of analysis on measurements of 1st slacks pattern design, waist front center getting in values, waist front center going down value, front hip width, and front crotch extension had similar industrial pattern design. Back center line angle, back crotch extension, and knee center point~back waist center point had significant differences. The designs and ease proposed for golf slacks pattern in this study are waist circumference 75.5 cm(1.8 cm, 2.38%), hip circumference 95 cm(2 cm, 2.11%), crotch length(front: -0.8 cm, -1.25%; rear: -1.8 cm, -2.83%), slacks length 96c m, gradient of C.B.L $10^{\circ}$, crotch extension (back 9.2~10.4 cm, front 3.2 cm).

• Fashion & Textile Research Journal
• /
• v.15 no.6
• /
• pp.1000-1009
• /
• 2013

Well-fitting riding breeches provide a comfortable ride. Horse-riding breeches should fit the lower body with patches located on the inside of hip and knees to prevent tears and slips. This study provides information about the fit of women's breeches using 3D human body scan data wearing commercially available two breeches according to posture. To get information about breeches fit, we measured the angle of waist line, the length, and the area of the breeches fit on four 20's women. This research showed the problem which was down for waist back line in the case of the horseback riding pose. The back waistline of the riding breeches should be raised compared to the front waistline; subsequently, an increased waistline angle results in less back waistline decrease. The breeches have plenty of length from back waist to crotch so the breech fit can be improved. The thigh circumference increased when riding in the front; therefore, good elasticity of the weft direction of the fabric is recommended. The length increase and the peripheral increase of the front knee significantly increased the surface area of the knee; consequently, knee patch material should be a two-way elastic fabric in all directions to enhance comfort according to riding motion.

• Journal of Korean Medicine for Obesity Research
• /
• v.7 no.1
• /
• pp.87-96
• /
• 2007

Objectives : This study was performed to evaluate the effect of oriental medical treatment on aged female obese patient. Methods : We experienced an aged female obese patient. We applied herbal medication(Choweseuncheng-tang), electrolipolysis, auricular acupuncture to her from 26th, March. 2007 to 25th, May. 2007. And we examined the changes of her weight, body composition, body size, skin resistance variability, visual analogue scale of knee pain. Results : 1. Her weight decreased from 73.5kg to 71.1kg and body mass index(BMI) decreased from $29.46kg/m^2$ to $28.11kg/m^2$. 2. Body fat mass(BFM) decreased from 25.7kg to 21.6kg but body muscle mass(BMM) increased from 45.1kg to 46.7kg. 3. Waist-hip ratio(WHR) decreased from 0.96 to 0.92. 4. Basal metabolic rate(BMR) increased from 1,273kcal to 1,314kcal. 5. The circumference of upper extremity decreased 1.03cm and lower extremity decreased 1.30cm but the circumference of the muscle of upper extremity increased 0.41cm and lower extremity increased 0.63cm. 6. The circumference of chest and hip are decreased. In addition to the circumference and fat of abdomen are decreased. 7. The visual analogue scale of knee pain is improved. Conclusions : According to above results, oriental medical treatment could be used safety to aged obese patients without loss of fat free mass. The study is more required to aged obese patient from now on.

• Fashion & Textile Research Journal
• /
• v.13 no.6
• /
• pp.934-942
• /
• 2011

This study was intended to analyze conventional grading increments and methods for middle-age men's pants, and to suggest new grading guidelines that will enable to improve satisfaction with size and silhouette as a result of combining the concept of grading, which help maintain the ratio and proportion by sizes as one of ready-made apparel's advantages, with body form oriented and aesthetic approaches. In the apparel industry, the current sizing specifications and methods adopted by relevant companies, as well as the characteristics of body forms of men aged 35 to 55 years were comparatively analyzed to find out problems and ultimately to suggest their solutions or improvements. It was considered that as the conventional grading practices used in the industry were customary on the basis of the past experiences, it was required to take the body forms of target consumers into account and also, to reconsider the conventional grading methods. Analyses of sizing and specifications by brands show that 4 to 19 sizes including 82 or 84 as standard size have been produced. Since men's apparel has a large number of sizes with the large range of sizes, grading is critically important. As silhouettes depend on the distribution of grading rule values at each point of increment pattern in the main regions during grading, it is necessary to consider both size grading and form variations. To maintain an appropriate silhouette with keeping the angle of center back line of a pattern, it is desirable to set the ratio of side line part to center part from the crease line to approximately 3:7. It is required to diversify the values of grading rules according to different sizes and pattern regions in consideration for the body forms of key consumers. In addition, if the natural lines of designs and patterns for the width increments of waist circumference and hip circumference, the increments of hip width in pant's front and back panels, the ratio of grading rule values of the right and left sides of crease line, knee circumference, thigh circumference and so on are taken into account, grading will be satisfactory in the all aspects of size, silhouette and ratio.