• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.9
• /
• pp.936-941
• /
• 2014

Walking mechanisms are very important for legged robots to ensure their stable locomotion. In this research, Klann-linkage is suggested as a walking mechanism for a water-running robot and is optimized using level average analysis. The structure of the Klann-linkage is introduced first and design variables for the Klann-linkage are identified considering the kinematic task of the walking mechanism. Next, the design problem is formulated as a path generation optimization problem. Specifically, the desired path for the foot-pad is defined and the objective function is defined as the structural error between the desired and the generated paths. A process for solving the optimization problem is suggested utilizing the sensitivity analysis of the design variables. As a result, optimized lengths of Klann-linkage are obtained and the optimum trajectory is obtained. It is found that the optimized trajectory improves the cost function by about 62% from the initial one. It is expected that the results from this research can be used as a good example for designing legged robots.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.3
• /
• pp.537-542
• /
• 2022

There is a limit to the current indoor air quality (IAQ) monitoring method using fixed sensors and devices. A mobile robot for IAQ monitoring was developed by mounting IAQ monitoring sensors on a small multi-legged robot to minimize vibration and protect the sensors from vibration while robot moves. The developed mobile robot used a simple gait mechanism to enable the robot to move forward, backward, and turns only with the combination of forward and reverse rotation of the two DC motors. Due to the simple gait mechanism, not only IAQ data measurements but also gait motion control were processed using a single Arduino board. Because the mobile robot has small number of electronic components and low power consumption, a relatively low-capacity battery was mounted on the robot to reduce the weight of the battery. The weight of mobile robot is 1.4kg including links, various IAQ sensors, motors, and battery. The gait and turning speed of the mobile robot was measured at 3.75 cm/sec and 14.13 rad/sec. The maximum height where the robot leg could reach was 33 mm, but the mobile robot was able to overcome the bumps up to 24 mm.