• PNF and Movement
• /
• v.4 no.1
• /
• pp.45-50
• /
• 2006

Purpose : This study shows the movements of the ankle and the foot in walking stages, and helps to diagnose and treat the problems of the ankle and the foot. The foot in human is a mean of the transportation, body support, and shock absorber. However, the slightest changes in the anatomical position can cause a significant increase of the stress and force in the ankle and the foot. The regular compressive force in the ankle of the normal person is generated by the contraction of the gastrocnemius and popliteus muscles, and transmitted to the achilles tendon. The plantar flexion about 10 degrees occurs immediately after the heel strike, getting ready for the weight acceptance. The shear force about 80 % of the body weight is generated immediately after the heel off of the mid stance phase. In those who have a problem in the ankle, the compression force at the ankle decreased to 1/3 of the body weight, and the shear force decreased, and the compressive force was reached at their maximum level earlier than the normal people. Conclusion : Analysis of the movements at the ankle and the foot in walking phase can make the effort to diagnose and treat the ankle and foot with the problems. However, the further study is necessary.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.2
• /
• pp.273-286
• /
• 2009

The objective of this research is to evaluate both quantitative analysis and qualitative analysis by comparing vital variable factors of the golf swing successes and the failures. At the moment of swing, each body segment and the movement of the club as well as kinematical parameters were produced by utilizing the 3-D swing analysis for the high school female golfers. As kinematical parameters, it analyzes the 3-D analysis and ground reaction force about the location change, velocity and angle. The 3-D swing analysis and ground reaction force location change, velocity and angle are analyzed for Kinematical parameters. As a result, the stable swing is maintained by club head showing very few front-back movement (X) when the address and the top swing. Also, the center of mass velocity contributes to the momentum increase by showing very rapid velocity when successful comparing with when failed at the time of top swing of left-right(Y) and it is thought that by lessening the cocking angle when successful from the top swing to the impact, it influences the linear velocity increase and has a good effect on a non-distance increase. It shows that Ground reaction force (GRF) is examined by showing the stable approval rating in a front-back(X) direction and left-right(Y) and connected to a successful swing.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.49 no.1
• /
• pp.47-56
• /
• 2012

Bicycle has a large amount of kinetic energy available for energy harvesting technology in its speedy and balanced riding movement. Systematic and realistic analysis of its dynamic property is essential to improve the efficiency of energy harvester. However, there has not been enough researches about precise measurement or analysis of bicycle dynamics on real roads. This study aims to investigate the characteristics of vibrational movement of bicycle using MEMS-based accelerometer and to develop a prototype of electromagnetic energy harvester with nonlinear behavior which is proper to the random vibrations accompanied in bicycle riding. The vibrational components have average magnitude of 1 g and turn out to be independent of riding speed. The developed prototype of energy harvester was installed on a front port of a bicycle to use this ambient vibration and generated an average electrical power of 1.5 mW which is enough to support power for most of portable sensors and short range radio-frequency communication. Further study about isolation of vibration from a rider and conversion efficiency is ongoing. The developed energy harvester is expected to be a platform technology for sustainable portable power supply for various smart IT devices and applications.

• 기호학연구
• /
• no.56
• /
• pp.137-158
• /
• 2018

In 1999, the French semiotician Jacques Fontanille published his work on discourse semiotics as an attempt to overcome the limitations of structuralism. Discourse semiotics has expanded the realm of semiotics by taking a phenomenological approach that examines the structure of consciousness. Phenomenology pays special attention to the operation of human consciousness, which, instead of staying put, moves from one place to another-unbeknownst to its agent. This paper examines "Bulls" through a phenomenological approach as the short story depicts the stream of consciousness that unfolds within the inner world of Pau, the young male protagonist. The rhetorical approach to literary analysis works at the level of the speech act and directly relates to speech act theory. In rhetorics, figures and tropes are dominated by speech acts. Whereas conventional rhetorical analysis lacks a kinetic perspective as it revolves around flat semantic inspections, the discourse semiotics approach applied in this paper allows for an indepth multidimensional analysis where the analyses of ${\acute{e}}nonc{\acute{e}}$ and ${\acute{e}}nonciation$ complement each other. Presenting a peasant movement to the reader through the eyes of the young male protagonist Pau, "Bulls" is considered a significant literary feat in the history of Korea's New Literature as the work is highly regarded for its impressive depiction of a communal movement. This paper reinterprets and reevaluates the story under a new light, mainly through a rhetorical approach and a phenomenological approach that hinges on discourse semiotics.

• Physical Therapy Korea
• /
• v.20 no.1
• /
• pp.47-54
• /
• 2013

The purpose of this study was to compare the immediate effects of upper trapezius muscle stretching in more tensed position (MTP) and less tensed position (LTP) on the change of range of motion (ROM) for neck rotation, and the ROM for conjunct neck motions at end-range of neck rotation toward the painful side in patients with unilateral neck pain. Eighteen patients with unilateral neck pain were recruited for the study's MTP group, and 18 age-, weight- and gender-matched patients with unilateral neck pain were recruited for LTP group. The ROM changes in active neck primary and conjunct motions were measured using a cervical ROM inclinometer in the sitting position. Our results showed that both upper trapezius stretching method in MTP and LTP were significantly effective in increasing the ROM of neck rotation toward painful side in patients with unilateral neck pain. However, a significantly greater increase in the ROM for neck rotation and a further decrease in conjunct neck extension during neck rotation toward the painful side were shown in MTP group, compared to LTP group. The upper trapezius stretching in MTP is useful in increasing the ROM of neck rotation and decreasing the range of conjunct neck extension during neck rotation toward the painful side in patients with unilateral neck pain.

• The Journal of the Korean dental association
• /
• v.58 no.11
• /
• pp.670-682
• /
• 2020

This research examined the difference in cognitive load and the virtual presence depending on auditory feedback and task difficulty in haptic-based dental simulation. In the field of dental education, practice-centered training using handpiece has been crucial because a practitioner's psychomotor experience has a significant impact on the mastery of treatment skills. For the novice, it is necessary to reduce errors in dental treatment to enhancing skill acquisition in the haptic practice. In the training process, the force-feedback is crucial to elaborate subtle movement to guide what to do and how it should be hard or soft. However, It is not easy to add force-feedback to generate kinetic experience training. As an alternative method, we examined that auditory feedback can help learners' skill training. In this study, we analyzed how the presence/absence of auditory feedback at the different levels of task difficulty impacts learners' psychological demand and virtual presence in the virtual reality simulation. For this study, 29 dental college students participated in a dental simulation. The participants were grouped into two conditions that are with and without auditory feedback. Additionally, two consecutive tooth preparation tasks with different levels of difficulty were used in the simulation. The auditory feedback condition gives alarms to a learner when he treats a non-targeted tooth with a virtual handpiece. The user's cognitive load and virtual presence were measured to examine the effects of auditory feedback. The results revealed that the main effect was found in cognitive loads. Also, a significant interaction effect was shown in the virtual presence. We discussed the effective design methods for the virtual reality-based dental simulation through the result of this study.

• Fashion & Textile Research Journal
• /
• v.19 no.2
• /
• pp.221-229
• /
• 2017

This study researched the needs of smart fashion items using energy harvesting for outdoor wearers and surveyed the application areas and design preferences for energy-harvesting systems based on outdoor activities. A total of 217 subjects were surveyed. Subjects who had at least 3 years of experience in outdoor activities were selected in order to increase the reliability of the research results. The survey investigated lifestyles based on outdoor activities, outdoor clothing and electronic equipment usage, purchase style, utilization plan, and design preference for energy-harvesting clothing and supplies. The results showed that 62.7% of the respondents had experience in outdoor activities for more than five years. 96.3% of the subjects carried electronic equipment, and 179 participants(82.5%) experienced discomfort due to battery consumption/dead batteries during outdoor activities. 78.4% were interested in smat fashion items using energy-harvesting technology, and the energy-conversion technology that was useful for outdoor activities was "kinetic energy"(74.7%). Participants showed a high preference for a detachable type(30.9%) and a city type(69.1%) that can be worn in outdoor activities as well as in general life. The preferred location of the electric power-charging device was the "Hem area of top garment"(35.9%), and the reason for this selection was that it was easy to operate and did not interfere with movement. The data from this paper can be used as a basis for product planning and product design for energy-harvesting apparel designers and supply developers for outdoor clothing.

• Korean Journal of Applied Biomechanics
• /
• v.20 no.1
• /
• pp.91-99
• /
• 2010

The purpose of this study was to the kinetic variables effects from the use of arch support inserts on low-arched people. We selected 10 people for the research and separated them into 2 groups, 5 people for the normal arched group and 5 people for the low arched group. Each group wear shoes which have a 3 step convertible arch support (level 0, level 2, level 5) and we measured their foot pressure and 3D motion analysis data. As a result, we found that the mean pressure at the heel of the low arched group was decreased when using the arch supports. The arch support induced the correct grounding area for the foot and dispersion of foot pressure. 3D motion analysis found that as the height of the arch support was increased, the movement of the Y-axis(inversion-eversion) was increased to relieve the shock to the heel. The arch support insert limited the range of motion(ROM) of the Z-axis(abduction-adduction) of the low arched person's ankle joint and prevented ankle injury caused by the excessive eversion when walking. Low arched people are seen to be easily tired due to the ineffective shock absorption of the knees and abnormal walking motion. In order to improve the problems, a 3 step convertible arch support(level 5) insert would improve the low-arched people's walking ability. In other words, the low arched people should be expected to walk as well as normal arched people when they wear shoes with the arch support insert.

• The Journal of the Korea Contents Association
• /
• v.13 no.10
• /
• pp.523-532
• /
• 2013

When the golf club hits the ground prior to making contact with the golf ball, we define it as 'fat shot'. The aim of this research was to investigate the difference between normal shot and fat shot in golf. Five candidates playing as recreational golfer participated in this research and they were all right-handed people. Time phase between each event, wrist cocking angle, elbow extension-flexion angle, backswing height, pelvis angle, thorax angle, L-GRF, R-GRF, pelvis linear velocity, pelvis angular velocity and COG path were calculated. For statistical analysis the paired T-test was used. An early un-cocking, an early right elbow extension and impact with leaving their weight behind foot were not reasons of fat shot. Backswing height, X-Factor, pelvis angle and thorax rotation angle were not different between normal shot and fat shot. But we could find a pattern of abrupt pelvic movement and weight shift to target direction just before impact in case of fat shot. In addition fat shot showed time-delayed and small value of pelvis linear velocity pattern to upward during downswing phase as against normal shot.

• Journal of Biomedical Engineering Research
• /
• v.38 no.3
• /
• pp.129-136
• /
• 2017

The exoskeleton robot is a technology developed to be used in various fields such as military, industry and medical treatment. The exoskeleton robot works by sensing the movement of the wearer. By recognizing the wearer's daily activities, the exoskeleton robot can assist the wearer quickly and efficiently utilize the system. In this study, LDA, QDA, and kNN are used to classify gait types through kinetic data obtained from subjects. Walking was selected from general walking and stair walking which are mainly performed in daily life. Seven IMUs sensors were attached to the subject at the predetermined positions to measure kinematic factors. As a result, LDA was classified as 78.42%, QDA as 86.16%, and kNN as 87.10% ~ 94.49% according to the value of k.