• Journal of the Korean institute of surface engineering
• /
• v.41 no.6
• /
• pp.301-307
• /
• 2008

In this paper, nanocrystallization of CuNiTiZr bulk metallic glass (BMG) subjecting to a kinetic spraying, dependent on impact velocity, was investigated by numerical and experimental approaches. The crystallization fraction and nucleation activation energy of initial feedstock and as-deposited coating were estimated by DSC and Kissinger method, respectively. The results of numerical modeling and experiment showed that the crystalline fraction and nucleation activation energy in BMG coatings were depended on kinetic energy of incident particle. Upon impact, the conversion of particle kinetic energy leads to not only decreasing free energy barrier but also increasing the driving force for an amorphous to crystalline phase transformation. The nanocrystallization of BMGs is associated with the strain energy delivered by a plastic deformation with a high strain rate.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.3
• /
• pp.337-343
• /
• 2011

A particular empirical equation for rainfall kinetic energy is needed to compute rainfall erosivity, calculated by the annual sum of the product of total rainfall energy and maximum 30-min rainfall intensity. If rainfall kinetic energy equation was different, rainfall erosivity will be produced differently. However, the previous studies in Korea had little concern about rainfall kinetic energy equation and it was not clear which rainfall kinetic energy is suitable for Korea. The purpose of this study is to analyze and evaluate the difference of the rainfall erosivity based on different rainfall kinetic energy equations obtained from previous studies. This study introduced new rainfall erosivity factors based on rainfall kinetic energy equation of Noe and Kwon (1984) that is only regression model developed in Korea. Data of annual rainfall erosivity for 21 weather stations in 1980~1999 were used in this study. The result showed that rainfall erosivity factors by the previous equations had been about 10~20% overestimated than rainfall erosivity by Noe and Kwon (1984)'s equation in Korea.

• Journal of Biomedical Engineering Research
• /
• v.32 no.2
• /
• pp.79-84
• /
• 2011

The purpose of this study was to investigate the relevance of the prediction equations derived from the relationship between metabolic energy expenditure and kinetic energy, for different speeds of walking and running over the treadmill. Seven male subjects participated in this study. A tri-axial accelerometer was attached on between the left and right posterior superior iliac spines. Kinetic energy was calculated by the integration of acceleration data and compared with the metabolic energy measured by a gas analyzer. Correlation coefficients were determined to find a relationship between the kinetic energy and the metabolic energy expenditure. Also, the difference between measured and predicted values was used to find the relevance for individual and group equations. Results showed a relatively good correlation between the measured metabolic energy and the calculated kinetic energy. In addition, a dramatic increase in kinetic energy was observed at the transition speed of walking and running (6 km/h). There was no difference in how to predict the kinetic energy expenditure for individual and group even though people have different physical characteristics. This study would be useful to predict metabolic energy expenditures by the regression analysis with acceleration data.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.2
• /
• pp.136-144
• /
• 2006

Vehicles usually have 3 types of speed pattern like acceleration, travel, and deceleration. It requires much driving energy from engine while accelerating, preserves much kinetic energy by inertia moment at travel speed, and releases the kinetic energy to the air while decelerating by the break system. If we accumulate the kinetic energy while decelerating and reuse the energy at the accelerating stage, then it can elevate the fuel efficiency, reduce the emission and improve the motive power. This paper proposes a hydraulic type energy regenerative system which converts the kinetic energy into hydraulic energy at the stage of deceleration and reuses it at the starting and accelerating stage of vehicles. The test equipment which has the field condition of city bus was prepared to evaluate the performance for energy regeneration. The test results show that both energy regeneration efficiency and fuel efficiency are improved significantly and the emission is reduced notably.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.21 no.2
• /
• pp.88-96
• /
• 2013

The objective of this research was to evaluate the suitability of sigmoidal and firstorder kinetic equations for simulating the methane production from solid wastes. The sigmoidal kinetic equations used were modified Gompertz and Logistic equations. Statistical criteria used to evaluate equation performance were analysis of goodness-of-fit (Residual sum of squares, Root mean squared error and Akaike's Information Criterion). Akaike's Information Criterion (AIC) was employed to compare goodness-of-fit of equations with same and different numbers of parameters. RSS and RMSE were decreased for first-order kinetic equation with lag-phase time, compared to the first-order kinetic equation without lag-phase time. However, first-order kinetic equations had relatively higher AIC than the sigmoidal kinetic equations. It seemed that the sigmoidal kinetic equations had better goodness-of-fit than the first-order kinetic equations in order to simulate the methane production.

• Journal of Power Electronics
• /
• v.15 no.5
• /
• pp.1256-1263
• /
• 2015

A novel vector control strategy for a permanent magnet synchronous motor (PMSM) based on the kinetic energy stored in the rotor is proposed in this paper. The novel strategy is composed of two closed loops, in which the current loop is the inner loop, and the kinetic energy serves as the outer loop. The theoretical basis and the design procedure of the two loops are given. The feasibility of the proposed control strategy is verified by experimental results. When compared with traditional vector control strategies, the proposed vector control strategy based on energy feedback has better dynamic performance. In addition, an effective estimation solution for the load variation is put forward.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.4
• /
• pp.596-598
• /
• 2006

• Bulletin of the Korean Chemical Society
• /
• v.28 no.2
• /
• pp.319-321
• /
• 2007

• Nuclear Engineering and Technology
• /
• v.41 no.8
• /
• pp.1073-1078
• /
• 2009

A kinetic model for the oxidation of a $UO_2$ pellet to $U_3O_8$ powder has been suggested by considering the mass transfer and the diffusion of oxygen molecules. The kinetic parameters were estimated by a fitting of the experimental data. The activation energies for the chemical reaction and the product layer diffusion were calculated from the kinetic model. The oxidation conversion of a $UO_2$ pellet was simulated at various operating conditions. The suggested model explains the oxidation behavior of $UO_2$ well.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.2
• /
• pp.253-258
• /
• 2011

The purpose of this study was to compare metabolic energy expenditure with the computed kinetic energy for different speeds of walking and running over the treadmill and to find the relevance for individual and group equation by performing a statistical analysis, Bland-Altman plot. Seven male subjects participated, and they were required to walk and run on the treadmill with the gas analyzer and triaxial accelerometer. Walking speeds were 3.0, 4.0, 5.0 and 6.0 km/h and running speeds were 7.0, 8.0 and 9.0 km/h respectively. Kinetic energy was calculated by the integration of acceleration data and compared with the metabolic energy measured by a gas analyzer. Correlation coefficients showed relatively good between the measured metabolic energy and the calculated kinetic energy. In addition, a dramatic increase in kinetic energy was also observed at the transition speed of walking and running, and two standard deviations in Bland-Altman plot, derived from the difference between measured and predicted values, were 1.14, 2.53, 2.93, 1.80, 2.80, 0.60 and 2.48 respectively. It was showed that there is no difference for methods of how to predict the kinetic energy expenditure for individual and group even though people had each different physical characteristic.