• Journal of Auto-vehicle Safety Association
• /
• v.10 no.3
• /
• pp.7-12
• /
• 2018

The Korean New Car Assessment Program (KNCAP) is a program to evaluate the safety of automobiles. In the safety assessment method, there are frontal collision, partial frontal collision, side collision, pillar collision, and left stability in the collision safety category. Among them, Korean in-depth analysis data shows that there are a lot of side collision accidents and it is necessary to protect them. This study will analyze the side collision accident that occurred in actual traffic accident based on Korea In-Depth Accident Study (KIDAS) and investigate the effect of center airbag on passenger in under side collision. In addition, with simulated side collision scenarios in the various side impact directions, it was investigated how the center airbag affects the driver and passenger in terms of kinematic and injury levels.

• Current Photovoltaic Research
• /
• v.4 no.2
• /
• pp.54-58
• /
• 2016

Laser-doped selective emitter process requires dopant source deposition, spin-on-glass, and is able to form selective emitter through SiNx layer by laser irradiation on desired locations. However, after laser doping process, the remaining dopant layer needs to be washed out. Laser-induced melting of pre-deposited impurity doping is a precise selective doping method minimizing addition of process steps. In this study, we introduce a novel scheme for fabricating highly efficient selective emitter solar cell by laser doping. During this process, laser induced damage induces front contact destabilization due to the hindrance of silver nucleation even though laser doping has a potential of commercialization with simple process concept. When the laser induced damage is effectively removed using solution etch back process, the disadvantage of laser doping was effectively removed. The devices fabricated using laser doping scheme power conversion efficiency was significantly improved about 1% abs. after removal the laser damages.

• Journal of Digital Convergence
• /
• v.15 no.4
• /
• pp.117-125
• /
• 2017

The purpose of this study is to investigate the actual effect of government R&D support and regulation as a policy on technology innovation of SMEs. Because the previous studies did not consider the endogeneity of R&D support and made inconsistent conclusions in the case of regulation, the empirical research was conducted by logistic, negative binomial regression and 2SLS analysis for 1,223 SMEs. The analysis results show that government support has the effect for technology innovation even considering the endogeneity of government R&D support, and government regulation has a positive effect on technology innovation which supports Porter's theory. These results imply that government R&D support is important in inducing technology innovation because of the vulnerability of SMEs technology development environment and government should foster SMEs technology innovation through appropriate regulation policies rather than unconditional deregulation.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.522-522
• /
• 2016

우리나라의 488개 유인도 중 강수량 부족 혹은 지하수의 수질문제 등으로 상습적 식수난을 겪고 있는 도서지역은 237개에 이르고 있다. 이들 도서지역은 생활용수를 우물, 간이상수도, 운반급수 등에 의존하고 있지만 이중 47%의 도서는 간이급수시설이 전무한 실정이다. 2015년에는 인천시 옹진군의 소청도, 대청도에 장기간 지속된 가뭄으로 식수원이 고갈되어 3일에 1시간으로 급수를 제한하였고 이로 인해 식수난 문제 외 관광산업의 소득저하 등의 문제가 발생되어 원활한 물공급문제가 해결되지 않으면 도서지역의 위기는 심각할 것으로 우려된다. 도서지역의 기본권인 먹는 물 문제를 해결하기 위해 정부 및 지자체에서는 소규모 유인도서에 해수담수화시설을 설치하여 유지관리 및 운영을 위한 인력을 배치하고 수동으로 조작하거나 단순 자동운전에 의해 운영 및 관리되고 있는 실정이다. 본 연구에서는 해수담수화시설의 안정적이고 효율적인 운영을 위해 지능적 수운영 알고리즘을 개발하였다. 제어시스템, 감시시스템, 계측시스템 등의 ICT 기술과 연계하여 수요를 정확히 예측하고, 실시간 전력비용과 저류량, 사용량 등을 통합적으로 고려하였으며 적시정량을 생산하여 저장 및 공급하며, 목표수질과 수량을 원활하고 안정적으로 공급할 수 있도록 제어 및 감시를 통한 지능적 수운영을 목적으로 연구하였다. 데이터의 수집과 전송, 분석, 제어, 감시 활동이 유기적으로 결합되어 용수의 생산과 분배, 공급활동을 자동화함으로 운영상의 리스크를 줄여주며, 필요시 통합운영센터에서의 의사결정을 지원할 수 있도록 개발하였다. 향후, 해수담수화시설뿐이 아닌 일반 상수도 수운영에 있어서의 취수, 도수, 정수, 배수지관리, 송수, 관망관리까지 자동화된 시스템을 개발하여 지능적 운영관리가 가능하도록 알고리즘 모델 및 프로그램을 제시하고자 한다.

• Journal of the Korean Geosynthetics Society
• /
• v.13 no.2
• /
• pp.31-39
• /
• 2014

The helical pile is a manufactured steel pile consisting of one or more helix-shaped bearing plates affixed to a central shaft. This pile is installed by rotating the shaft into the ground to support structural loads. The advantages of helical piles are no need for boring or grout process, and ability to install with relatively light devices. The bearing capacity of the helical pile is exerted by integrating the bearing capacity of each helix plate attached to the steel shaft. In this paper, to estimate the bearing capacity of moderate-size helical piles, 6 types of helical piles were constructed with different shaft diameter, plate configuration and the penetration depth. A series of field loading tests was performed to evaluate the effect of helical pile configuration on the bearing capacity of helical pile, constructed in two different shaft diameters (i.e. 73 mm and 114 mm). In the same way, the diameter of bearing plate was also changed from 400mm to 250mm with one or three plates. As well, the penetration depth was varied from 3m to 6m to analyze the relation between the penetration depth and the bearing capacity. As a result, not only the increase of the shaft diameter, but also the number or diameter of helix bearing plates enhances the bearing capacity. Especially the configuration of the helix plate is more critical than the shaft diameter.

• Journal of the Korean Geosynthetics Society
• /
• v.13 no.4
• /
• pp.77-85
• /
• 2014

The helical pile has become popular with some constructional advantages because relatively compact equipment is needed for installing helical piles. However, field loading tests for estimating the bearing capacity of helical piles have drawbacks that the required dead load should be as much as the operation load, and reaction piles or anchors are required. In this paper, the bi-directional load test without necessity of reaction piles and loading frames was applied to the helical pile, and the load-settlement curves of the helical piles were measured. The bi-directional load test was performed in two separate stages with the aid of a special hydraulic cylinder whose diameter is equal to that of the pile shaft. In the first stage, the hydraulic cylinder is assembled immediately above the bottom helix plate, and the end bearing capacity of the helical pile is measured. In the second stage, the hydraulic cylinder is assembled above the top helix plate, and the skin friction of the helical pile is measured. The pile loading-test program was carried out for the two different helical piles with the shaft diameter of 89 mm and 114 mm, respectively. However, the configuration of helix plates is identical with three helix plates of 450-, 350-, 200- mm diameter. Results of the bi-directional load test were verified by the conventional static pile loading test. As a result, the bearing capacity estimated by the bi-directional load test is in good agreement with the result of the conventional pile loading test.